One-pot,one-step,and selective terpolymerization of ethylene oxide,propylene oxide,and COS to copoly(thioether)s with tunable thermal properties

Facile construction of sulfur-rich polymers using readily available raw chemicals is an area aggressively pursued but challenging. Herein we use common feedstocks of ethylene oxide (EO), propylene oxide (PO), and carbonyl sulfide (COS) to synthesize copoly(thioether)s which are traditionally produced from unpleasant and difficult to store episulfides. In this protocol, the EO/COS coupling selectively generates a pure poly(ethylene sulfide) (PES) with melting temperature (T_m) values up to 172°C and high yields up to 98%. The EO/PO/COS terpolymerization leads to the incorporation of soft poly(propylene sulfide) (PPS) and hard PES segments together, affording a random PES-co-PPS copoly(thioether) with the complete consumption of EO and PO. Additionally, by simply varying the EO/PO feeding ratio, the obtained copoly(thioether)s possess tunable thermal properties, T_m values in the range of 76–144°C, and excellent solubility. These copolymerizations are conducted in one-pot/one-step at industrially favored reaction temperatures of 100–120°C using catalysts of common organic bases, suggesting a facile and practical manner. Especially, the copoly(thioether) exhibits high refractive indices up to 1.68 owing to its high sulfur content, suggesting a broad application prospect in optical materials.     

L-Arginine based polyester amide/hyaluronic acid hybrid hydrogel with dual anti-inflammation and antioxidant functions for accelerated wound healing

Nowadays, there are still many challenges to skin regeneration. As a new type of skin substitute, hydrogel has emerging gradually with its excellent properties. However, it is still a challenge to combine with biological active agents to facilitate skin regeneration. Under the circumstance, we synthesized argininebased poly(ester amide)(Arg-PEA) and hyaluronic acid(HA-MA), and combined them into new hybrid hydrogels via photo-crosslinking. We found that the internal structure and physicochemical...     

Athermal and Soft Multi-Nanopatterning of Azopolymers: Phototunable Mechanical Properties

Imprinting nanopatterns on flexible substrates has diverse applications in advanced fabrication. However, the traditional thermal nanoimprint lithography (T-NIL) often causes shrinkage upon cooling. Here, a simple yet versatile method is introduced to fabricate multiple nanopatterns on a flexible substrate coated with an azopolymer by combining athermal nanoimprint lithography (AT-NIL) and photolithography. The azopolymer has various mechanical properties upon photoirradiation: 1) phototunable glass-transition temperatures (T_g) and concomitantly photoinduced switch from glassy plastic to viscoplastic polymer; 2) prominent modulation of viscoplasticity under light illumination at different wavelengths. Regionally selective multiple nanopatterns are conveniently fabricated, presenting angle-dependent structural color images on poly(ethylene terephthalate) (PET) substrates. The flexible, athermal and multiple nanopatterning method has the potential for on-demand fabrication of complex nanopatterns.     

Interfacial Synthesis of a Monolayered Fluorescent Two-Dimensional Polymer through Dynamic Imine Chemistry

A fluorescent monolayered two-dimensional polymer (2DP) containing both tetraphenylethylene (TPE) and imine linkages is synthesized at air-water interface using the Langmuir-Blodgett method. We designed TPE-based monomers with long distances between the TPE and the imine linkages to avoid the charge transfer and therefore keep the fluorescence. A monolayered 2DP provided with more than 104 μm² in domain size and around 0.8 nm thickness was obtained through a successive Schiff base reaction at air-water interface. The nanostructures and fluorescent property of 2DP films were characterized by optical microscopy, SEM, TEM, AFM and fluorescence spectrum. Most importantly, the tip-enhanced Raman spectroscopy (TERS) was utilized here to confirm the success of the polycondensation of monolayered 2DP.     

Reverse Thinking of the Aggregation-Induced Emission Principle: Amplifying Molecular Motions to Boost Photothermal Efficiency of Nanofibers**

Using reverse thinking of the aggregation-induced emission (AIE) principle, we demonstrate an ingenious and universal protocol for amplifying molecular motions to boost photothermal efficiency of fibers. Core–shell nanofibers having the olive oil solution of AIE-active molecules as the core surrounded by PVDF-HFP shell were constructed by coaxial electrospinning. The molecularly dissolved state of AIE-active molecules allows them to freely rotate and/or vibrate in nanofibers upon photoexcitation and thus significantly elevates the proportion of non-radiative energy dissipation, affording impressive heat-generating efficiency. Photothermal evaluation shows that the core–shell nanofibers with excellent durability can reach up to 22.36 % of photothermal conversion efficiency, which is 26-fold as the non-core–shell counterpart. Such a core–shell fiber can be used for photothermal textiles and solar steam generation induced by natural sunlight with green and carbon-zero emission.     

Optimization of anionic conductivity through the coexistence of ionomer cluster and backbone-backbone morphologies in anion exchange membranes

Random copolymers of poly(4-vinylpyridine) and polyisoprene were synthesized, and subsequently quaternized with 1-alkylbromides. The number of carbons on the pendant side-chain of the resultant comb-shaped polymer, n, ranged from 2–8. The comb-shaped polymers were crosslinked employing thiol-ene chemistry to give mechanically robust ion conducting membranes. Analysis by wide and medium-angle X-ray scattering show three morphology regimes that are dependent on the number of carbons on the pendant side-chains. When n = 2, ionomer cluster morphology was dominant, when n = 8 backbone-backbone morphology was dominant, and when n = 3–6, the membrane showed a coexistence of both ionomer cluster and backbone-backbone morphologies. Evaluation of the water uptake of the membranes showed a maximum water uptake per cation of 9.5 when n = 5 at 95% relative humidity (RH) and 60°C. Conductivity of the samples characterized by electrochemical impedance spectroscopy showed bromide conductivity as high as 110 mS/cm when n = 3 at 95% RH and 90°C.     

Coordinate Bond Breaking Induced by Collapse of Poly(\begin{document}$N$\end{document}-isopropyl acrylamide) as Ligands of a Rare Earth Complex

A novel water-soluble luminescent complex consisting of Eu(ally-dbm)\begin{document}$_3$\end{document}-2Tppo and poly(N-isopropyl acrylamide) (PNIPAM) is synthesized through a series of chemical reactions. The structure of the complex is characterized by TGA, GPC, HNMR, and the thermal-responsive fluorescence of the complex in aqueous solution is investigated. It is found that PNIPAM collapse above the lower critical solution temperature causes the coordination bond breaking, leading to weakening of the fluorescence from Eu\begin{document}$^{3+}$\end{document} and enhancing of the fluorescence from the ligands. When temperature decreases, the fluorescence from Eu\begin{document}$^{3+}$\end{document} is found to boost up and the fluorescence from ligands weakens accordingly. It is deduced from this phenomenon that the ligands re-coordinate with europium ions again along with the temperature decreasing, which is further confirmed by IR measurements. This thermal-responsive fluorescence is of reversibility, which can be used as molecular probes for biological imaging and collapse studying of PNIPAM.     

Novel hyperbranched polymers synthesized via A3 + B(B′) approach by radical addition‐coupling polymerization

In this study, a novel application of radical addition‐coupling polymerization (RACP) for synthesis of hyperbranched polymers is reported. By Cu/PMDETA‐mediated RACP of 2‐methyl‐2‐nitrosopropane with trimethylolpropane tris(2‐bromopropionate) or a bromo‐ended 3‐arm PS macromonomer, two types of hyperbranched polymers with high degree of polymerization are synthesized under mild conditions, respectively. The chemical structures of the hyperbranched polymers are carefully characterized. By selective degradations of the ester groups and weak bonds of NO? C in the polymers, high degree of alternative connection of the two monomers in the synthesized polymers have been identified. Based on the experimental results, mechanism of formation of the hyperbranched polymer is proposed, which includes formation of carbon radicals from the tribromo monomer through single electron transfer, its capture by 2‐methyl‐2‐nitrosopropane that results in nitroxide radical, and cross‐coupling reaction of the nitroxide radical with other carbon radicals. Hyperbranched polymer can be formed in a step‐growth mode after multiple steps of such reactions. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 904–913     

A modern approach to the solution and analysis of the Simha-Somcynsky model for the description of pressure-volume-temperature properties of polymer fluids

We revisit the Simha-Somcynsky model of polymer fluids with the purpose of developing novel theoretical and computational approaches to simplify and speed up its solution as well as the fitting of experimental data, and decrease its level of mathematical complexity. We report a novel method that allows us to solve one of the two equations of the model exactly, thus putting the level of mathematical difficulty on a par with the one of other models for polymer fluids. Moreover, we describe a computational algorithm capable of fitting all five parameters of the model in an unbiased way. The results obtained reproduce literature results and fit experimental pressure-volume-temperature and solubility parameter data for three polymers very accurately. Moreover, the new techniques allow for the investigation of the model at very low temperatures. Unexpectedly, the model predicts behaviors that could be interpreted as a glass transition, as routinely observed in dilatometry and differential scanning calorimetry, and a glass phase. We compared the predicted and experimental T g’s for cis poly(1,4-butadiene) and found an excellent quantitative agreement.     

Using a Novel and Easy-to-Use Sandwich Structure Device to Evaluate the Cooling Properties of Cool Materials

A number of cool materials have been designed and used in hot weather to minimize the heat coming from sunlight. Traditionally, solar reflectance and infrared emittance were measured to characterize the cooling properties of cool materials. However, these methods could represent the cooling property only indirectly. In this work, a sandwich structure device that can straightforwardly measure the cooling properties of cool materials was designed. Two cool materials, including high-density polyethylene (HDPE) and polyvinyl chloride (PVC), were selected to verify the device. For the purpose of comparison, UV-vis-NIR spectral characterization was also used to evaluate the cooling properties of the selected materials. The results, especially for the HDPE/Green 260 composite sample, which presents much lower solar reflectance but better cooling property, indicated that the cooling properties cannot be entirely represented by only the reflectance or transmittance, and the sandwich structure device was able to make up for this deficiency.