Simultaneous determination of noradrenaline and dopamine in Portulaca oleracea L. by capillary zone electrophoresis

A simple and rapid capillary electrophoretic method was developed for the simultaneous determination of noradrenaline (NA) and dopamine (DA) in Portulaca oleracea L. The buffer solution used in this method was 40 mM tris (hydroxymethyl) aminomethane (Tris)-H3PO4 at pH 2.00 containing 15% methanol. The effects of pH value, organic modifier, and applied voltage were investigated. The linear ranges of NA and DA were 0.5-100 microg/mL (r=0.9952) and 6.25-200 microg/mL (r=0.9992), respectively. The relative standard deviations of the corrected peak area were 6.73% and 4.26%, respectively. NA and DA in Portulaca oleracea L. were simultaneous determined successfully within 5.6 min. In this way, the contents of NA and DA in different parts (stem, leaves, and seeds) of P. oleracea L. and in different extracts of leaves with different solvents (distilled water, 50% methanol, and methanol) were studied.     

SYNTHESIS OF CeO2 NANOPARTICLES IN W/ O MICROEMULSION

The phase composition and properties of microemulsion system of Titron N-101 / n-pentanol/ n-octane/ water (ammonia solution) were studied. CeO₂ nanopaticles were prepared by the reaction of cerous nitrate.     

Optical properties of ZnS–carbon nanotubes composites

In this work we present a study of growth and characterization of ZnS/carbon nanotube (CNT) composites. The composites were prepared with a chemical mix technique and characterized by SEM analysis, Auger Electron Spectroscopy (AES) and Cathodoluminescence (CL) spectroscopy. The analyses show that the sample is formed by a direct contact between CNT and zinc sulfide. In particular, SEM images show CNTs wrapped around ZnS micrometer particles. Furthermore, AES spectroscopy shows the absence of chemical bonds between ZnS and CNT and that the sample homogeneity increases with the CNT amount in the composite.Finally CL studies show that our composites present a visible luminescence signal centered at about 500 nm, with a shift of luminescence emission peak linked to the amount of CNT in the sample.     

Fabrication and electrochemistry study of multi-thiol coronary molecule monolayers

Single-component monolayer of novel multi-thiol coronary molecule and two-component mixed monolayer composed of coronary molecule and n-alkanethiol on gold substrates are described. The assembly of monolayers is characterized by ellipsometry, infrared spectroscopy and X-ray photoelectron spectroscope. The electrochemical properties of the single- and two-component monolayers are evaluated by cyclic voltammetry and electrochemical impedance spectroscopy experiments. Coronary molecule with multi-thiol groups has the ability to form stable monolayer via the interaction of mercapto groups and Au surface. Electrochemical impedance measurements indicate that 89.9% of the gold surface is blocked by the coronary molecule, which is attributed to the special spatial structure of the coronary molecule. The uncovered site on gold surface in coronary molecule monolayer could be occupied by the second suitable molecule. The mixed monolayer prepared by stepwise assembly of coronary molecule and n-alkanethiol has complete compact packing and few defects.     

Super-hydrophilic properties of TiO2-DLC nanocomposite films fabricated by the simple electrochemical process

Anatase TiO₂ nanoparticles incorporated DLC films were successfully deposited on single crystalline silicon substrates by the electrolysis of TiO₂-methanol solution under ambient atmospheric pressure and low temperature. Anatase TiO₂ nanoparticles were embedded into amorphous carbon matrix, forming the typical nanocrystalline/amorphous nanocomposite films, confirmed by transmission electron microscopy (TEM). TiO₂ incorporation effectively increased the sp³-hybridized carbon concentration in the composite film, and further regulated the microstructure and surface morphology. Furthermore, the static contact testing completely displayed, TiO₂ incorporation got the composite films super-hydrophilic, which fundamentally improved the wetting ability of DLC film.     

First-principles prediction of the electronic and magnetic properties of nitrogen-doped ZnO nanosheets

The electronic and magnetic properties of N-doped ZnO nanosheets are investigated by density functional theory using local spin density approximation. The results show that in an isolated N-doped ZnO nanosheet, there is a clear spontaneous polarization of N 2p state with a magnetic moment 1.0 μ_B/N. We also find that the doped nitrogen atoms in ZnO nanosheets have a clustering tendency with ferromagnetic coupling between them, and thus a high room-temperature ferromagnetic nature is expected. The ferromagnetic coupling in N-doped ZnO nanosheets can be attributed to the hole-mediated double-exchange mechanism through strong p–d interaction between nitrogen and zinc atoms.     

Structural and Tribological Properties of Polytetrafluoroethylene Composites Filled with Glass Fiber and Al2O3 in Atomic Oxygen Environment

Effects of atomic oxygen (AO) irradiation on the structural and tribological behaviors of polytetrafluoroethylene (PTFE) composites filled with both glass fibers and Al₂O₃ were investigated in a ground-based simulation facility, in which the average energy of AO was about 5 eV and the flux was 5.0 × 10¹⁵/cm² s. It was found that AO irradiation first induced the degradation of PTFE molecular chains on the sample surface, and then resulted in a change of surface morphology. The addition of Al₂O₃ filler significantly increased the AO resistance property of PTFE composites. Friction and wear tests indicated that AO irradiation affected the wear rate and increased the friction coefficient of specimens. The PTFE composite containing 10% Al₂O₃ exhibit the best AO resistance and lower wear rate after long time AO irradiation.     

A simple solution-immersion process for the fabrication of superhydrophobic cupric stearate surface with easy repairable property

The present work reports a simple and time-saving method to fabricate cupric stearate film on zinc substrate by a solution-immersion process. Superhydrophobic surfaces are conventionally prepared employing two steps: roughening a surface and lowering its surface energy. The fabrication of superhydrophobic cupric stearate surface is reported using a one-step process by immersing a zinc plate coated with copper into the stearic acid solution, simplifying the complexity of two different steps involved in the conventional methods. The surface of the zinc plate coated with copper is found to be covered with low surface energy cupric stearate film providing the water contact angle of 160 ± 1° with the rolling off properties. In addition, the damaged superhydrophobic surface can restore superhydrophobicity property by immersing the surface into the stearic acid solution again.