Synthesis of Rod-Like Co3O4 Catalyst Derived from Co-MOFs with Rich Active Sites for Catalytic Combustion of Toluene

Catalysis Surveys from Asia - Co3O4 catalyst derived from Co-MOFs demonstrated rich active sites in the catalytic reaction. In this paper, we prepared the rod-like Co3O4 catalysts by calcining...     

Topical application of zein-silk sericin nanoparticles loaded with curcumin for improved therapy of dermatitis

Atopic dermatitis is characterized by leukocyte migration into the skin dermis and typically driven by excessive chemokine production at the site of inflammation. Conventional topical formulations such as gels, creams, and ointments are insufficient for this treatment because of low penetration of drug molecules into the targeted skin tissues. Herein, using a simple, green, sustainable strategy, we have developed novel primary zein nanoparticles embedded in curcumin (Cur) and coated with silk sericin (ZHSCs) for the topical delivery of Cur to penetrate into the dermis and exercise anti-dermatitis effects on the lesion with minimal side-effects. Transdermal delivery experiments and porcine skin fluorescence imaging indicated that ZHSCs facilitate the penetration of Cur across the epidermis layer of skin to reach deep-seated sites. Notably, ZHSCs = 1:0.25 (zein-to-silk sericin mass ratios of 1:0.25) markedly elevated the skin permeability and cumulative turnover of Cur transferred, which were provided a greater than a 3.8-fold increase relative to free Cur. The special nanoparticles of ZHS = 1:0.25 possessed the deepest localization depth and experience a transition of the particle structure and core-shell separation after penetrating into the dermis of skin. In a cell model of dermatitis induced by tumor necrosis factor α/interferon γ co-stimulation, compared with free Cur, Cur-loaded ZHS nanoparticles down-regulated the generation of inflammatory cytokines and chemokines in keratinocytes through suppression of the nuclear translocation of NF-κBp65 and hence exerted an anti-dermatitis effect. This strategy may provide new avenues and direction for the demanding issues of valid topical delivery systems.     

Efficient modeling and order reduction of new 3D beam elements with warping via absolute nodal coordinate formulation

Nonlinear Dynamics - To describe the particular mechanical behaviors of beams with both uniform and non-uniform cross sections, such as the bidirectional bending, torsion-bending coupling, the...     

High-performance nonfused ring electron acceptor with a steric hindrance induced planar molecular backbone

Three nonfused ring electron acceptors (NFREAs) TTC6,TT-C8T and TT-TC8 were purposefully designed and synthesized.The molecular geometry can be adjusted by the steric hindrance of lateral substituents.According to the DFT calculations,from TTC6 to TT-C8T and TT-TC8,planarity of the molecular backbone is gradually improved,accompanying with the enhancing of intramolecular charge transfer effect.As for TT-TC8,the two phenyl substituents are almost perpendicular to the molecular backbone,which endues the acceptor with good solubility and suppresses it to form over-aggregation.Multidirectional regular molecular orientation and closer molecular stacking are formed in TT-TC8 film.As a result,TT-TC8 based devices afford the highest PCE of 13.13%,which is much higher than that of TTC6 (4.41%) and TT-C8T (10.42%) and among the highest PCE values based on NFREAs.     

光纤基底TiNi形状记忆合金薄膜制备工艺

将TiNi基记忆合金薄膜与光纤相结合可制成智能化、集成化且成本经济的微机电系统和微传感器件.本文采用磁控溅射法在二氧化硅光纤基底上制备TiNi记忆合金薄膜,系统讨论了溅射工艺参数以及后续退火处理对薄膜质量的影响.采用自研制光纤镀膜掩膜装置在直径为125μm的光纤圆周表面上形成均匀薄膜.实验表明:在靶基距、背底真空度、Ar气流量和溅射时间一定的条件下,溅射功率存在最佳值;溅射压强较大时,薄膜沉积速率较低,但薄膜表面粗糙度较小.进行退火处理后,薄膜形成较良好的晶体结构,Ti_49.09Ni_50.91薄膜中马氏体B19′相和奥氏体B2相共存,但以B19′为主.根据本文研究结果,在玻璃光纤基底上制备高质量的TiNi基记忆合金薄膜是可实现的,本工作为下一步研制微机电系统和微型传感器做了基础准备.     

Uniform regularity for an isentropic compressible MHD-P1 approximate model arising in radiation hydrodynamics

Czechoslovak Mathematical Journal - It is well known that people can derive the radiation MHD model from an MHD-P1 approximate model. As pointed out by F. Xie and C. Klingenberg (2018), the uniform...     

Nonlinear vibration response of a complex aeroengine under the rubbing fault

Nonlinear Dynamics - Rolling bearing and squeeze film damper will introduce structural nonlinearity into the dynamic model of aeroengine. Rubbing will occur due to the clearance reduction design of...     

Amorphous High-Entropy Hydroxides of Tunable Wide Solar Absorption for Solar Water Evaporation

The high-entropy materials have raised much attention in recent years due to their extraordinary performances in mechanical, catalysis, energy storage fields. Herein, a new type of high-entropy hydroxides (e.g., NiFeCoMnAl(OH)_x) that are amorphous and capable of broad solar absorption is reported. A facile one-pot co-precipitation method is employed to synthesize these amorphous high-entropy hydroxides (a-HEHOs) under ambient conditions. The a-HEHOs thus obtained display widely tunable bandgap (e.g., from 2.6 to 1.1 eV) due to their high-entropy and amorphous characteristics, enabling efficient light absorbance and photothermal conversion in the solar regime. Further solar water evaporation measurements show that the a-HEHOs delivered a considerable energy conversion efficiency of 55%, comparable to black titanium oxides that are synthesized using more complex and expensive methods.     

Vanishing coefficients and identities concerning Ramanujan’s parameters

The Ramanujan Journal - In this paper we investigate several infinite products with vanishing Taylor coefficients in arithmetic progressions. These infinite products are closely related to...     

Modeling biomembranes and red blood cells by coarse-grained particle methods

In this work, the previously developed coarse-grained (CG) particle models for biomembranes and red blood cells (RBCs) are reviewed, and the advantages of the CG particle methods over the continuum and atomistic simulations for modeling biological phenomena are discussed. CG particle models can largely increase the length scale and time scale of atomistic simulations by eliminating the fast degrees of freedom while preserving the mesoscopic structures and properties of the simulated system. Moreover, CG particle models can be used to capture the microstructural alternations in diseased RBCs and simulate the topological changes of biomembranes and RBCs, which are the major challenges to the typical continuum representations of membranes and RBCs. The power and versatility of CG particle methods are demonstrated through simulating the dynamical processes involving significant topological changes, e.g., lipid self-assembly vesicle fusion and membrane budding.