Reducing Occupational Noise Propagated from Centrifugal Fan through Dissipative Silencers: A Field Study

Acoustic performance of dissipative silencer was evaluated to determine the effectiveness of perforated duct porosity and absorbent material density in reducing occupational noise exposure propagated from centrifugal fan. Design charts were applied to predict noise reduction and length of a dissipative silencer. Dissipative silencers with various punched duct porosity (14%, 30% and 40%) and sound absorbent density (80 Kg/m³, 120 Kg/m³, and 140 Kg/m³) were designed and fabricated. According to ISO9612 and ISO11820, noise level was measured before and after installing all nine test silencers at fixed workstations around the discharge side of a centrifugal fan in a manufacturing plant. On average, the noise level at the discharge side of a fan without silencer was measured to be 93.6 dBA, whereas it was significantly mitigated by 67.4 dBA to 70.1 dBA after installing all silencers. Dynamic insertion loss for a dissipative silencer with 100 cm length was predicted to be 27.9 dB, which was in agreement with experimental ones. Although, there was no significant differences between insertion loss of silencers, the one with 30% porosity and 120 Kg/m³ rock wool density had the highest insertion loss of 26.2 dBA. Dissipative silencers noticeably reduced centrifugal fan noise exposures. Increasing sound absorbent density and duct porosity up to a certain limit could probably be effective in noise reduction of dissipative silencers.     

Electrochemical study of Cu2O/CuO composite coating produced by annealing and electrochemical methods

The electrochemical behavior of a copper oxide electrode produced by annealing and electrochemical methods was studied in an acetonitrile solvent by means of the cyclic voltammetry method. The presence of different peaks of oxidation and reduction produced by repeating the potential scans, numerous variations in the current, and shifts of peak potentials in consecutive cycles have been justified. Voltammograms proved that various oxidation species can be produced in solid-deposited forms of Cu₂O_s and CuO_s and dissolved forms of Cu(II)_sol and Cu(I)_sol ions. The experimental results indicated that higher amounts of Cu₂O_s than CuO_s can be produced in the process of copper electrode annealing. Also, the nature of copper species is responsible for different peak currents in the cyclic voltammograms, characterized by UV–Vis and XRD spectrometric methods.

     

Lattice norms on the unitization of a truncated normed Riesz space

Positivity - Truncated Riesz spaces was first introduced by Fremlin in the context of real-valued functions. An appropriate axiomatization of the concept was given by Ball. Keeping only the first...     

Synthesis,characterization and application of a novel nanorod-structured organic–inorganic hybrid material as an efficient catalyst for the preparation of aminouracil derivatives

Research on Chemical Intermediates - In this work, a novel nanorod-structured organic–inorganic hybrid material namely nanorod-[SiO2-Pr-Im-SO3H][TFA] (N-[SPIS][TFA]) has been synthesized, and...     

Doping radius effects on an erbium-doped fiber amplifier

In an erbium-doped fiber amplifier(EDFA), erbium ions act as a three-level system. Therefore, much higher pump energy is required to achieve the population inversion in an erbium-doped fiber(EDF). This higher pump energy requirement complicates the efficient design of an EDFA. However, efficient use of the pump power can improve the EDFA performance. The improved performance of an EDFA can be obtained by reducing the doping radius of the EDF. A smaller doping radius increases pump–dopant interactions and subsequently increases the pump–photon conversion efficiency. Decreasing the doping radius allows a larger proportion of dopant ions,which are concentrated near the core, to interact with the highest pump intensity. However, decreasing the doping radius beyond a certain limit will bring the dopant ions much closer and introduce detrimental ion–ion interaction effects. In this Letter, we show that an optimal doping radius in an EDF can provide the best gain performance. Moreover, we have simulated the well-known numerical aperture effects on EDFA gain performance to support our claim.     

Highly efficacious preparation of 3,3′-(arylmethylene)-bis(2-hydroxynaphthoquinone) derivatives catalyzed by a nanorod-structured organic–inorganic hybrid material

Research on Chemical Intermediates - A nanorod-structured organic–inorganic hybrid material namely nanorod-[SiO2–Pr–Im–SO3H][CF3CO2] (N-[SPIS][TFA]) has been applied as a...     

Cu-Doped ZnO Nanoparticles for Non-Enzymatic Glucose Sensing

Copper-doped zinc oxide nanoparticles (NPs) Cu_xZn_1−xO (x = 0, 0.01, 0.02, 0.03, and 0.04) were synthesized via a sol-gel process and used as an active electrode material to fabricate a non-enzymatic electrochemical sensor for the detection of glucose. Their structure, composition, and chemical properties were characterized using X-ray diffraction (XRD), transmission electron microscopy (TEM), Fourier-transform infrared (FTIR) and Raman spectroscopies, and zeta potential measurements. The electrochemical characterization of the sensors was studied using cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), and differential pulse voltammetry (DPV). Cu doping was shown to improve the electrocatalytic activity for the oxidation of glucose, which resulted from the accelerated electron transfer and greatly improved electrochemical conductivity. The experimental conditions for the detection of glucose were optimized: a linear dependence between the glucose concentration and current intensity was established in the range from 1 nM to 100 μM with a limit of detection of 0.7 nM. The proposed sensor exhibited high selectivity for glucose in the presence of various interfering species. The developed sensor was also successfully tested for the detection of glucose in human serum samples.