Crosslinkable high dielectric constant polymer dielectrics for low voltage organic field‐effect transistor memory devices

I n this study, we successfully synthesized water/methanol soluble random copolymers with a high dielectric constant, poly(n‐(hydroxymethyl) acrylamide‐co‐5‐(9‐(5‐(diethylamino)pentyl)?2‐(4‐vinylphenyl)?9H‐fluorene(P(NMA‐co‐F6NSt)), which contained chemical crosslinkable segment (NMA) and hole trapping building block (F6NSt). The feeding molar ratios of two monomers (NMA:F6NSt) were set as 100:0, 95:5, 80:20, and 67:33 for the copolymers of P1 , P2 , P3, and P4 , respectively. The crosslinked P(NMA‐co‐F6NSt) thin film could serve as both dielectric and charge storage layers in organic field‐effect transistor (OFET) memory device and exhibited high k (i.e., 4.91–6.47) characteristics, leading to a low voltage operation and a small power consumption. Devices based on the P1 ‐ P4 dielectrics showed excellent insulating properties and good charge storage performance under a low operating voltage in a range of ±5V because of tightly network structures and well‐dispersed trapping cites. In particular, P3 ‐based memory device exhibited a large memory window of 4.13 V with stable data retention stability over 10⁴ s, a large on/off ratio of 10⁴, and good endurance characteristics as high as 200 cycles. The above results suggested that a high‐performance OFET memory device could be facilely achieved using the novel crosslinkable high‐k copolymers. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 3224–3236     

Tween 20-stabilized gold nanoparticles combined with adenosine triphosphate-BODIPY conjugates for the fluorescence detection of adenosine with more than 1000-fold selectivity

This study describes the development of a simple, enzyme-free, label-free, sensitive, and selective system for detecting adenosine based on the use of Tween 20-stabilized gold nanoparticles (Tween 20-AuNPs) as an efficient fluorescence quencher for boron dipyrromethene-conjugated adenosine 5′-triphosphate (BODIPY-ATP) and as a recognition element for adenosine. BODIPY-ATP can interact with Tween 20-AuNPs through the coordination between the adenine group of BODIPY-ATP and Au atoms on the NP surface, thereby causing the fluorescence quenching of BODIPY-ATP through the nanometal surface energy transfer (NSET) effect. When adenosine attaches to the NP surface, the attached adenosine exhibits additional electrostatic attraction to BODIPY-ATP. As a result, the presence of adenosine enhances the efficiency of AuNPs in fluorescence quenching of BODIPY-ATP. The AuNP-induced fluorescence quenching of BODIPY-ATP progressively increased with an increase in the concentration of adenosine; the detection limit at a signal-to-noise ratio of 3 for adenosine was determined to be 60 nM. The selectivity of the proposed system was more than 1000-fold for adenosine over any adenosine analogs and other nucleotides. The proposed system combined with a phenylboronic acid-containing column was successfully applied to the determination of adenosine in urine.     

Phosphorescent κ3-(N^C^C)-Gold(III) Complexes: Synthesis,Photophysics, Computational Studies and Application to Solution-Processable OLEDs

Efficient OLED devices have been fabricated using organometallic complexes of platinum group metals. Still, the high material cost and low stability represent central challenges for their application in commercial display technologies. Based on its innate stability, gold(III) complexes are emerging as promising candidates for high-performance OLEDs. Here, a series of alkynyl-, N-heterocyclic carbene (NHC)- and aryl-gold(III) complexes stabilized by a κ³-(N^C^C) template have been prepared and their photophysical properties have been characterized in detail. These compounds exhibit good photoluminescence quantum efficiency (η_PL) of up to 33 %. The PL emission can be tuned from sky-blue to yellowish green colors by variations on both the ancillary ligands as well as on the pincer template. Further, solution-processable OLED devices based on some of these complexes display remarkable emissive properties (η_CE 46.6 cd.A⁻¹ and η_ext 14.0 %), thus showcasing the potential of these motifs for the low-cost fabrication of display and illumination technologies.     

高效液相色谱法测定发泡聚苯乙烯材料中六溴环十二烷含量

采用高效液相色谱法测定发泡聚苯乙烯材料中六溴环十二烷的含量。发泡聚苯乙烯材料样品用乙腈提取,以GL Sciences Inc Inertsil ODS-SP色谱柱(250mm×4.6mm,5μm)为分离柱,以乙腈-水(85+15)溶液为流动相,在检测波长254nm处进行测定。六溴环十二烷在一定的质量浓度范围内与其峰面积呈线性关系,方法的检出限(3S/N)在140~200mg·kg-1之间。以空白样品为基体进行加标回收试验,所得回收率在88.6%~103%之间,测定值的相对标准偏差(n=7)在1.2%~6.5%之间。     

Aryne‐Induced Novel Tandem 1,2‐Addition/(3+2) Cycloaddition to Generate Imidazolidines and Pyrrolidines

A new “single‐flask” method was developed for the synthesis of imidazolidines and pyrrolidines with high stereoselectivity. First, a Schiff base was arylated with an aryne. Second, an intramolecular proton transfer took place from the methylene position to the anionic aryne ring. Third, the resultant ylide reacted with a second equivalent of the same Schiff base in situ or an electron‐deficient alkene through a (3+2) cycloaddition. These sequential tandem 1,2‐addition/(3+2) cycloaddition reactions led to the desired heterocycles in 63–88 % yields.     

Organocatalyzed Asymmetric Conjugate Addition of Heteroaryl and Aryl Trifluoroborates: a Synthetic Strategy for Discoipyrrole D

Bis‐heteroaryl or bis‐aryl stereocenters were formed by an organocatalytic enantioselective conjugate addition using the respective trifluoroborate salts as nucleophiles. Control studies suggested that fluoride dissociation is necessary in the anhydrous conditions. This strategy is applicable to the synthesis of discoipyrrole D, an inhibitor of BR5 fibroblast migration.     

ZnO‐Coated Carbon Nanotubes: Inter‐Diffusion of Carboxyl Groups and Enhanced Photocurrent Generation

ZnO is a defect‐governed oxide and emits light at both visible and UV regimes. This work employs atomic layer deposition to produce oxide particles on oxygenated carbon nanotubes, and the composites only show emission profiles at short wavelengths. The quenching of defect‐related emissions at long wavelengths is verified, owing to carboxyl diffusion into oxygen vacancies, and doping is supported by ZnCO₃ formation in oxide lattice. Fully coated tubes display an increased photocurrent and the quantum efficiency increases by 22 % relative to the bare nanotubes.     

Ultrasound Microbubbles Enhance the Efficacy of Insulin-Like Growth Factor-1 Therapy for the Treatment of Noise-Induced Hearing Loss

The application of insulin-like growth factor 1 (IGF-1) to the round window membrane (RWM) is an emerging treatment for inner ear diseases. RWM permeability is the key factor for efficient IGF-1 delivery. Ultrasound microbubbles (USMBs) can increase drug permeation through the RWM. In the present study, the enhancing effect of USMBs on the efficacy of IGF-1 application and the treatment effect of USMB-mediated IGF-1 delivery for noise-induced hearing loss (NIHL) were investigated. Forty-seven guinea pigs were assigned to three groups: the USM group, which received local application of recombinant human IGF-1 (rhIGF-1, 10 µg/µL) following application of USMBs to the RWM; the RWS group, which received IGF-1 application alone; and the saline-treated group. The perilymphatic concentration of rhIGF-1 in the USM group was 1.95- and 1.67- fold of that in the RWS group, 2 and 24 h after treatment, respectively. After 5 h of 118 dB SPL noise exposure, the USM group had the lowest threshold shift in auditory brainstem response, least loss of cochlear outer hair cells, and least reduction in the number of synaptic ribbons on postexposure day 28 among the three groups. The combination of USMB and IGF-1 led to a better therapeutic response to NIHL. Two hours after treatment, the USM group had significantly higher levels of Akt1 and Mapk3 gene expression than the other two groups. The most intense immunostaining for phosphor-AKT and phospho-ERK1/2 was detected in the cochlea in the USM group. These results suggested that USMB can be applied to enhance the efficacy of IGF-1 therapy in the treatment of inner ear diseases.     

以纯硅silicalite-1为晶种制备空心结构ZSM-5沸石分子筛

微孔分子筛在实际应用过程中常常受到扩散限制的影响,分子筛内部的利用率不高;制备空心结构分子筛对于改善分子筛扩散传质、提高分子筛利用率具有重要意义。以纯硅silicalite-1为晶种,以四丙基氢氧化铵(TPAOH)为结构导向剂制备ZSM-5分子筛;无定型硅铝物种首先在晶种表面晶化生长,同时碱性合成体系的碱度则可以溶解不稳定的silicalite-1晶种,通过控制调变生长与溶解的相对速率制备得到具有空心结构的ZSM-5分子筛;该多级孔道ZSM-5分子筛的制备方法简单、易操作,具有广泛的应用潜力。