自掺杂SnO2微球的水热合成及其可见光催化性能

本研究采用水热法,以柠檬酸为螯合剂,通过控制n(Sn⁴⁺)/n(Sn²⁺)的数值,合成了由具有丰富氧空位的SnO₂纳米晶体组装成的微球。通过X射线衍射(XRD)、扫描电子显微镜(SEM)、透射电子显微镜(TEM)、傅里叶红外光谱(FT-IR)、X射线光电子能谱(XPS)及UV-Vis漫反射光谱对SnO₂纳米微球进行表征分析,结果表明:在酸性水热条件和柠檬酸的螯合作用下,二氧化锡纳米晶体聚集形成微球;在Sn⁴⁺/Sn²⁺摩尔比例为3:7时,其微球尺寸最小,整体分散性较好;同时适量二价锡离子的掺杂使得该样品氧空位浓度达到最佳,氧空位的存在将使得样品光吸收范围拓展至可见光,因而该样品显示出较强的可见光催化效率,在8 min内完全降解甲基橙。     

Asymmetric nonlinear-mode-conversion in an optical waveguide withPT symmetry

Asymmetric mode transformation in waveguide is of great significance for on-chip integrated devices with one-way effect, while it is challenging to achieve asymmetric nonlinear-mode-conversion (NMC) due to the limitations imposed by phase-matching. In this work, we theoretically proposed a new scheme for realizing asymmetric NMC by combining frequency-doubling process and periodic PT symmetric modulation in an optical waveguide. By engineering the one-way momentum from PT symmetric modulation, we have demonstrated the unidirectional conversion from pump to second harmonic with desired guided modes. Our findings offer new opportunities for manipulating nonlinear optical fields with PT symmetry, which could further boost more exploration on on-chip nonlinear devices assisted by non-Hermitian optics.     

Insight into shear‐induced modification for improving processability of polymers: Effect of shear rate on the evolution of entanglement state

Many experimental results have revealed that the re‐entanglement kinetics of disentangled polymers is much slower than that predicted by tube theory. This retarded recovery of fully entangled state is of practical significance that shear‐induced modification may offer a way to improve processability for a polymer by reducing viscosity. This work tried to figure out the shear‐rate dependence variation of viscosity in the view of evolution of entanglement state through disentanglement and re‐entanglement, aiming to provide fundamental insights into application prospect of shear‐induced modification in preparing “in‐pellet” disentangled polymers prior to final processing. High‐density polyethylene was sheared on a parallel‐plate rotational rheometer with a linearly increased shear rate. Results showed that higher shear rate could induce further disentanglement, resulting in a lower viscosity with a reduction rate up to 93.7%, larger molecular weight between entanglements M_e , and longer re‐entanglement time. Additionally, less entanglement would give a larger lamellar thickness of sheared samples after nonisothermal crystallization. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 598–606     

3D Organic–Inorganic Perovskite Ferroelastic Materials with Two Ferroelastic Phases: [Et3P(CH2)2F][Mn(dca)3] and [Et3P(CH2)2Cl][Mn(dca)3]

Organic–inorganic hybrid perovskite-type multiferroics have attracted considerable research interest owing to their fundamental scientific significance and promising technological applications in sensors and multiple-state memories. The recent achievements with divalent metal dicyanamide compounds revealed such malleable frameworks as a unique platform for developing novel functional materials. Herein, two 3D organic–inorganic hybrid perovskites [Et₃P(CH₂)₂F][Mn(dca)₃] ( 1 ) and [Et₃P(CH₂)₂Cl][Mn(dca)₃] ( 2 ) (dca=dicyanamide, N(CN)₂⁻) are presented. Accompanying the sequential phase transitions, they display a broad range of intriguing physical properties, including above room temperature ferroelastic behavior, switchable dielectricity, and low-temperature antiferromagnetic ordering (T_c=2.4 K for both 1 and 2 ). It is also worth noting that the spontaneous strain value of 1 is far beyond that of 2 in the first ferroelastic phase, as a result of the precise halogen substitution. From the point view of molecular design, this work should inspire further exploration of multifunctional molecular materials with desirable properties.     

Nanomaterials in Cerebrovascular Disease Diagnose and Treatment

Cerebrovascular diseases (CVDs) are among the most serious diseases with high mortality and disability rates. The prevalent diagnosis and treatment methods of CVDs include imaging and interventional therapy. With the development of nanotechnology, large numbers of nanomaterials have been applied to the diagnosis and treatment of CVDs, mainly including carbon nanotubes, quantum dots, fullerenes, and dendrimers. In this review, the applications of nanomaterials in the field of diagnosis and treatment of CVDs, mainly including drug target delivery, imaging, therapy, endovascular treatment, and angiogenesis, are summarized. The applications of nanomaterials in the field of CVD are almost in the laboratory, and more effort is needed for clinical translation. The aim of this review is to provide useful information for future research and equipment development.     

Quantum Watermark Algorithm Based on Maximum Pixel Difference and Tent Map

International Journal of Theoretical Physics - A new quantum watermark algorithm is presented by combining maximum pixel difference partitioning with the least significant bit substitution...     

Improvement of capacitance activity for Cu‐doped Ni‐based metal–organic frameworks by adding potassium hexacyanoferrate into KOH electrolyte

Cu‐doped Ni‐based metal–organic frameworks (MOFs) nanomaterials fabricated through a one‐pot hydrothermal reaction were characterized, and their performance as supercapacitor electrode materials was further studied for the first time. The results indicated that the doping of foreign metals and the introduction of K₃[Fe(CN)₆] in the KOH electrolyte significantly improve the performance of the supercapacitor. The results indicated that the Ni_2.6Cu_0.4 MOFs material shows the highest specific capacitance (1282 F g^?1 at 1 A g^?1 in mixed 2 M KOH and 0.1 M K₃[Fe(CN)₆]) and optimal capacitance retention (85.7% after 2000 cycles). This work provides a feasible optimization strategy for the construction of MOFs‐based supercapacitor electrode materials with excellent performance, and also provides a reliable experimental and theoretical basis for practical industrial production.     

Highly sensitive and selective detect of p‐arsanilic acid with a new water‐stable europium metal–organic framework

The p‐arsanilic acid (p‐ASA), as an aromatic organoarsenic compounds, had received considerable concerns for their potential toxicity and carcinogenic properties. It was essential to detect p‐ASA with a facile method. In this paper, an europium based fluorescent metal–organic framework (MOF) [Eu₂(clhex)·2H₂O)]·H₂O ( BUC‐69 ) was successfully prepared under hydrothermal conditions with 1,2,3,4,5,6‐cyclohexanehexacarboxylic acid (H₆clhex) as organic linker. BUC‐69 displayed superior fluorescence capability to achieve selective and sensitive detection toward p‐ASA in water, which presented the first example of a MOF‐based sensor to detect p‐ASA. BUC‐69 showed excellent chemical stability in solutions under pH ranging from 4 to 12, which makes it be a potential sensor both in acidity and alkalinity condition. Significantly, BUC‐69 performed well in fluorescent sensing of p‐ASA at a low concentration (10^?6 M) in the simulated wastewater prepared with real lake water, and the results were comparable to the values detected by Inductively Coupled Plasma Optical Emission Spectrometer (ICP‐OES). The corresponding mechanism of fluorescent sensing toward p‐ASA with BUC‐69 was proposed and affirmed.     

Selective Excitation of Band Extrema in Valley Photonic Crystals

Flexible control of building blocks of photonic crystals enables achieving desirable band structures. Exploration of photonic band extrema has brought many fantastic features to design artificial optical materials, such as Brillouin‐zone‐corner extrema for valley photonic materials and zone‐center extremum for zero‐index metamaterials. However, two such kinds of extrema are always found independently in different photonic crystals. In this work, a kind of valley photonic crystals possessing both zone‐center and zone‐corner band extrema almost at the same frequency is proposed. Inspired by antennas theory, a three‐antenna array (TAA) source is devoted to individually manipulate each extremum. The correlation coefficient is given to determine the coupling efficiency between the TAA source and extrema eigenmodes. By using a source with a high correlation coefficient, these extrema bulk states are selectively excited consistent with their eigenfields. Furthermore, three control cases are shown that multiple extrema points are simultaneously excited, in order to confirm the validity of the correlation coefficient. Finally, a potential application of a beam‐steering device is proposed through selective excitation of ternary extrema. This work develops binary valley states into ternary mix states, rendering more degrees of freedom for on‐chip optical information transport, particularly for beam steering and mode division multiplexing.