Journal of Optimization Theory and Applications - We consider the conic linear program given by a closed convex cone in an Euclidean space and a matrix, where vector on the right-hand side of the... 相似文献
Herein, we investigated the analytical features of potentiometric immunosensors for detection of alpha-fetoprotein (AFP) in hepatocellular carcinoma at different electrodes, such as carbon fiber microelectrode (CFME) and carbon-disk electrode (CDE), respectively. To construct such an immunosensor, anti-AFP capture antibodies were first conjugated covalently onto the activated electrodes through typical carbodiimide coupling. Thereafter, one-step immunoreaction protocol was successfully introduced to develop a new potentiometric immunoassay upon addition of AFP. Accompanying the antigen-antibody reaction, the surface charges of the modified electrodes were changed for the readout of electric potential. Results indicated that the linear range of CDE-based immunosensor was 0.1–100 ng mL−1 AFP, whereas the assay sensitivity by using CFME could be further increased to 3.2 pg mL−1 with the linear range from 0.01 to 500 ng mL−1 AFP. Meanwhile, CFME-based immunosensor showed high sensitivity, good reproducibility and specificity, and could be utilized for the analysis of human serum specimens with consistent results relative to commercialized ELISA kit. 相似文献
Science China Chemistry - A light-induced, nickel-catalyzed three-component arylsulfonation of 1,3-enynes in the absence of photocatalyst is reported. This methodology exhibited mild conditions,... 相似文献
The microfluidic chip for nucleic acid detection in vitro is an essential application of microfluidic technology to the process of in vitro diagnosis. The 90° bend microchannels in chip designed for facilitating assay reagent delivery may cause reagent residues and cast mutual contamination between detection reagents, which significantly affects the detection accuracy. In this paper, a two-dimensional gas–liquid two-phase flow model is constructed to simulate the liquid residue phenomenon. Using the results of simulation, the residual liquid generation can be observed and the area of residual liquid can be obtained. The accuracy of the numerical simulation is verified by comparison with the experimental results. The effects of the fillet radius R, the diameter ratio d1/d2 of the vertical to horizontal sections, the flow velocity v, and the surface roughness Ra on the residual amount are studied. We find that the fillet radius is inversely proportional to the residual amount within the range v = 20–100 mm/s and there is almost no liquid residue in the channel when the radius increases to R = 1 mm. When the channel diameter ratio d1/d2 increases, the liquid residual amount also increases by approximately 98%. The increased surface roughness Ra significantly increases the residual amount. The results of this study provide a reference for the optimal design of microchannels on chips.
Nonlinear Dynamics - This study analyzes the vibro-impact behavior of two adjacent cantilever beams subjected to vibration generated by applying harmonic excitation to their rigid base. For the... 相似文献
Theoretical and Mathematical Physics - The initial-boundary value problems for the matrix Lakshmanan–Porsezian–Daniel system are studied by utilizing the Fokas unified transform... 相似文献
Side-chain engineering has been demonstrated as an effective method for fine-tuning the optical, electrical, and morphological properties of organic semiconductors toward efficient organic solar cells (OSCs). In this work, three isomeric non-fullerene small molecule acceptors (SMAs), named BTP-4F-T2C8, BTP-4F-T2EH and BTP-4F-T3EH, with linear and branched alkyl chains substituted on the α or β positions of thiophene as the side chains, were synthesized and systematically investigated. The results demonstrate that the size and substitution position of alkyl side chains can greatly affect the electronic properties, molecular packing as well as crystallinity of the SMAs. After blending with donor polymer D18-Cl, the prominent device performance of 18.25% was achieved by the BTP-4F-T3EH-based solar cells, which is higher than those of the BTP-4F-T2EH-based (17.41%) and BTP-4F-T2C8-based (15.92%) ones. The enhanced performance of the BTP-4F-T3EH-based devices is attributed to its stronger crystallinity, higher electron mobility, suppressed biomolecular recombination, and the appropriate intermolecular interaction with the donor polymer. This work reveals that the side chain isomerization strategy can be a practical way in tuning the molecular packing and blend morphology for improving the performance of organic solar cells.
Nonlinear Dynamics - In this paper, we present a novel methodology for nonlinear dynamic analysis of chemical processes that are posed as differential–algebraic equations (DAE) systems. With... 相似文献