Information propagation in recurrent neuronal populations with mixed excitatory–inhibitory synaptic connections

Nonlinear Dynamics - Linearizing the equations of motion of a constrained multibody system is a common need in, for example, stability analyses. While the theory of modelling multibody systems is...     

双激光脉冲打靶形成Gd等离子体的极紫外光谱辐射

高端芯片制造所需要的极紫外光刻技术位于我国当前面临35项"卡脖子"关键核心技术之首.高转换效率的极紫外光源是极紫外光刻系统的重要组成部分.本文通过采用双激光脉冲打靶技术实现较强的6.7 nm极紫外光输出.首先,理论计算Gd¹⁸⁺—Gd²⁷⁺离子最外层4d壳层的4p-4d和4d-4f能级之间跃迁、以及Gd¹⁴⁺—Gd¹⁷⁺离子最外层4f壳层的4d-4f能级之间跃迁对波长为6.7 nm附近极紫外光的贡献.其后开展实验研究,结果表明,随着双脉冲之间延时的逐渐增加,波长为6.7 nm附近的极紫外光辐射强度呈现先减弱、后增加、之后再减弱的变化趋势,在双脉冲延时为100 ns处产生的极紫外光辐射最强.并且,在延时为100 ns处产生的光谱效率最高,相比于单脉冲激光产生的光谱效率提升了33%.此外,发现双激光脉冲打靶技术可以有效地减弱等离子体的自吸收效应,获得的6.7 nm附近极紫外光谱宽度均小于单激光脉冲打靶的情形,且在脉冲延时为30 ns时刻所产生的光谱宽度最窄,约为单独主脉冲产生极紫外光谱宽度的1/3.同时...     

Hydrogen production via catalytic decomposition of NH3 using promoted MgO-supported ruthenium catalysts

Catalytic decomposition of NH_3 to high purity hydrogen offers a promising strategy for fuel cells, but presents challenges for high hydrogen yields at comparatively low temperatures due to the lack of efficient catalysts. Here, we report the facile preparation of ultra-fine ruthenium(Ru) species dispersed on Mg O, which show excellent activity and high temperature stability for NH_3 decomposition reaction. The hydrogen yield of the prepared Ru/Mg O catalysts reaches ca. 2,092 mmol H_2 g~(–1) Ru min~(–1) at450 °C, far exceeding that of the previously reported most reactive Ru-based catalysts and the same chemical composition samples prepared by other approaches. Various characterization techniques containing X-ray absorption fine structure(XAFS),in-situ diffuse reflectance infrared Fourier transform spectroscopy(in-situ DRTFTS) and temperature-programmed reduction/desorption(TPR/TPD) were carried out to explore the structure-function relation of the prepared Ru/Mg O catalysts. We found that the Ru species interact strongly with the Mg O support, which can efficiently protect the Ru species and Mg O support from agglomerating during NH_3 decomposition test, maintaining the stability of the catalysts.     

Insight into 6π Electrocyclic Reactions of 1,8‐Dioxatetraene

A variety of benzofuranone‐based spiroisochromenes were originally designed and synthesized to gain insight into the oxa‐6π electrocyclic reaction of cis,cis‐1,8‐dioxatetraene for the first time. The stability of the 1,8‐dioxatetraene intermediate is governed by its steric congestion and can be fine‐tuned through modification of the backbone structure, leading to the reactivity differences in the 6π electrocyclic reaction and the emergence of photochromic properties.     

An improved evaluation of the neutron background in the PandaX-Ⅱ experiment

In dark matter direct detection experiments,neutron is a serious source of background,which can mimic the dark matter-nucleus scattering signals.In this paper,we present an improved evaluation of the neutron background in the PandaX-II dark matter experiment by a novel approach.Instead of fully relying on the Monte Carlo simulation,the overall neutron background is determined from the neutron-induced high energy signals in the data.In addition,the probability of producing a dark-matter-like background per neutron is evaluated with a complete Monte Carlo generator,where the correlated emission of neutron(s)andγ(s)in the(α,n)reactions and spontaneous fissions is taken into consideration.With this method,the neutron backgrounds in the Run 9(26-ton-day)and Run 10(28-ton-day)data sets of PandaX-II are estimated to be(0.66±0.24)and(0.47±0.25)events,respectively.     

Solid‐phase extraction of phenoxyacetic acid herbicides in complex samples with a zirconium(IV)‐based metal–organic framework

A zirconium(IV)‐based metal–organic framework material (MOF‐808) has been synthesized in a simple way and used for the extraction of phenoxyacetic acids in complex samples. The material has good thermal and chemical stability, large specific surface area (905.36 m²/g), and high pore size (22.18 Å). Besides, it contains a large amount of Zr‐O groups, easy‐to‐form Zr‐O‐H bond with carboxyl groups of phenoxyacetic acids, and possesses biphenyl skeleton structure, easy to interact with compounds through π‐π and hydrophobic interactions. These characteristics make the material very suitable for the extraction of certain compounds with a high extraction efficiency and excellent selectivity. The extraction conditions were optimized, and then an analytical method was successfully established and applied for analysis of actual samples. The solid‐phase extraction method based on prepared material had a wide linear range of 0.2–250 μg/L and a low detection limit of 0.1–0.5 μg/L for four phenoxyacetic acid compounds including 2,4‐dichlorophenoxyacetic acid, 2‐(2,4‐dichlorophenoxy) propionic acid, 4‐chlorophenoxyacetic acid, and dicamba. The relative standard deviations of intra‐ and interday precision were 1.8–3.8 and 4.3–6.9%, and the recoveries after spiking were between 77.1 and 109.3%. The results showed that the material is a desired substituent for the extraction of compounds with benzene ring structure containing carboxyl groups.     

Development of Lysosome-Targeted Fluorescent Probes for Cys by Regulating the Boron-dipyrromethene (BODIPY) Molecular Structure

Our previous discovery suggested that substituents on the 1,7 positions delicately modulate the sensing ability of the meso-arylmercapto boron-dipyrromethene (BODIPY) to biothiols. In this work, the impact of delicate modulations on the sensing ability is investigated. Therefore, 1,7-dimethyl, 3,5-diaryl substituted BODIPY is designed and developed and its conformationally restricted species with a meso-arylmercapto moiety ( DM-BDP-SAr and DM-BDP-R-SAr ) as selective fluorescent probes for Cys. Moreover, the lysosome-target probes ( Lyso-S and Lyso-D ) based on DM-BDP-SAr carrying one or two morpholinoethoxy moieties were developed. They were able to detect Cys selectively in vitro with low detection limits. Both Lyso-S and Lyso-D localized nicely in lysosomes in living HeLa cells and exhibited red fluorescence for Cys. Moreover, a novel fluorescence quenching mechanism was proposed from the calculations by density functional theory (DFT). The probes may go through intersystem crossing (from singlet excited state to triplet excited state) to result in fluorescence quenching.     

A Biosilification Fusion Protein for a ‘Self‐immobilising’ Sarcosine Oxidase Amperometric Enzyme Biosensor

Monomeric sarcosine oxidase (mSOx) fusion with the silaffin peptide, R5, designed previously for easy protein production in low resource areas, was used in a biosilification process to form an enzyme layer electrode biosensor. mSOx is a low activity enzyme (10–20 U/mg) requiring high amounts of enzyme to obtain an amperometric biosensor signal, in the clinically useful range <1 mM sarcosine, especially since the K_m is >10 mM. An amperometric biosensor model was fitted to experimental data to investigate dynamic range. mSOx constructs were designed with 6H (6×histidine) and R5 (silaffin) peptide tags and compared with native mSOx. Glutaraldehyde (GA) cross‐linked proteins retained ～5 % activity for mSOx and mSOx‐6H and only 0.5 % for mSOx‐R5. In contrast R5 catalysed biosilification on (3‐mercaptopropyl) trimethoxysilane (MPTMS) and tetramethyl orthosilicate (TMOS) particles created a ‘self‐immobilisation’ matrix retaining 40 % and 76 % activity respectively. The TMOS matrix produced a thick layer (>500 μm) on a glassy carbon electrode with a mediated current due to sarcosine in the clinical range for sarcosinemia (0–1 mM). The mSOx‐R5 fusion protein was also used to catalyse biosilification in the presence of creatinase and creatininase, entrapping all three enzymes. A mediated GC enzyme linked current was obtained with dynamic range available for creatinine determination of 0.1–2 mM for an enzyme layer ～800 nm.     

基于单轴旋转INS/GPS组合姿态误差观测的垂线偏差测量方法

单轴旋转INS/GPS组合导航系统的姿态误差直接受垂线偏差的影响,因此利用对单轴旋转INS/GPS组合的姿态误差观测也可实现垂线偏差的估计。首先,利用INS中的三个激光陀螺构建了激光陀螺组合体(LGU)并进行自主姿态测量,以LGU作为姿态基准以获取INS/GPS组合的姿态误差。然后,建立垂线偏差测量的观测方程和状态方程。最终采用Kalman滤波/平滑算法同时实现垂线偏差和其他系统误差的最优估计。通过对状态变量精确、合理地建模,并利用全球重力模型补偿垂线偏差信号的低频分量,从而实现垂线偏差与系统误差的解耦。通过仿真验证了该方法的可行性,仿真所用的航迹由实测数据生成。仿真结果表明该方法能够有效地测量垂线偏差的高频扰动量。由于该方法的测量精度依赖于所采用的陀螺性能,采用角随机游走较小的陀螺可以获得较好的垂线偏差测量结果。船载实验结果表明,该方法测量得到的垂线偏差数据重复性精度优于0.5″。