Dynamic behavior and stability analysis of nonlinear modes in the fourth-order generalized Ginzburg–Landau model with near $$\mathcal{PT}$$ PT -symmetric potentials

Nonlinear Dynamics - Parametrically excited oscillators are used in several domains, in particular to improve the dynamical behaviour of systems like in the case of the parametric amplification or...     

四方体MgO的制备及对有机染料的吸附

以六水氯化镁和六次甲基四胺为原料,采用水热法合成四方体MgO,考察其对有机染料甲基橙和亚甲基蓝的吸附行为.通过TGA-DTA、SEM、XRD、N2-sorption和FT-IR等手段表征样品.结果表明,原料浓度、温度和表面活性剂对四方体MgO结构的形成影响较小,而反应时间的延长有助于有序结构的组装.温度170℃、时间24h、MgCl2·6H2O与C6H12N4浓度比为1∶2和表面活性剂PVP是制备四方体MgO的最佳条件.在溶液浓度10mg · L-1的单一吸附实验过程中,四方体MgO对甲基橙和亚甲基蓝的去除率分别为91.3;和22.3;,吸附过程均为单层吸附且符合Langmuir等温吸附模型和伪二级吸附动力学方程.在溶液浓度40 mg·L-1、甲基橙和亚甲基蓝浓度比3∶1的混合溶液吸附过程中,四方体MgO对甲基橙和亚甲基蓝的去除率分别为80.1;和97.9;.     

离子液体在大气压等离子体中稳定性研究

采用发射光谱、紫外可见吸收光谱、红外吸收光谱和核磁共振技术分析1-丁基-3-甲基咪唑硫酸氢盐（[Bmim]HSO₄）, 1-丁基吡啶硫酸氢盐（HSO₄）和1-丁基-3-甲基咪唑四氟化硼（[Bmim]BF₄）三种离子液体在大气压介质阻挡放电氩等离子体体系中的稳定性，并分别以上述三种离子液体为辅助液采用大气压介质阻挡放电等离子体技术制备TiO₂，进一步研究三种离子液体在等离子体中的稳定性对所制备的TiO₂晶相结构的影响。结果表明：向大气压介质阻挡放电氩等离子体中分别引入[Bmim]HSO₄，HSO₄和[Bmim]BF₄离子液体后并未改变氩等离子体放电光谱谱峰的位置和数量且没有新的谱峰生成，但谱峰强度都明显降低，说明上述三种离子液体没有在等离子体区蒸发形成激发态物种；[Bmim]HSO₄和HSO₄放电前后的红外吸收光谱基本一致，表明离子液体在放电后的化学键未发生改变；[Bmim]HSO₄和HSO₄的紫外可见吸收光谱显示其吸收峰的位置和强度未发生改变，说明两种离子液体在等离子体作用后的结构是稳定的；[Bmim]BF₄放电前后的红外吸收光谱各个特征峰并无明显差异，但其紫外可见吸收光谱图谱吸收峰的位置却发生较大的偏移，进一步对放电前后的[Bmim]BF₄离子液体进行核磁共振分析，两者的1H NMR峰数相同，但放电后的离子液体化学位移向高位偏移大约0.2单位，说明其化学环境发生了变化，表明有部分[Bmim]BF₄结构发生改变。光谱和核磁共振技术分析表明离子液体[Bmim]BF₄在等离子体作用后结构发生了改变。采用三种离子液体辅助大气压介质阻挡放电等离子体技术制备TiO₂样品的X-射线衍射分析结果表明 [Bmim]HSO₄和HSO₄辅助制备的HSO₄-TiO₂和[Bmim]HSO₄-TiO₂，谱图与锐钛矿相TiO₂标准谱图基本一致，表明所制备的TiO₂为纯锐钛矿型。而[Bmim]BF₄辅助制备的[Bmim]BF₄-TiO₂在2θ=24.1°处的衍射峰向小角度偏移，2θ=48°处的衍射峰向大角度偏移，说明[Bmim]BF₄在辅助制备TiO₂过程中，F进入TiO₂的晶格，破坏了TiO₂原子间的平衡状态，生成了F掺杂TiO₂光催化材料。F掺杂TiO₂光催化材料的形成也间接证明了离子液体[Bmim]BF₄在大气压等离子体中的不稳定性，此结果与核磁共振及紫外可见光的检测结果相一致。同时说明离子液体在等离子体的作用下对于纯锐钛矿晶格的形成和促进高活性掺杂型的光催化材料具有重要作用。为等离子体辅助离子液体制备高性能纳米材料提供重要的实验和理论依据。     

Cube‐like 12‐MC‐4 and Offset Stacked 10‐MC‐3 Metallacrowns: Synthesis,Structure, and Magnetic Properties

Two complexes [Mn^III₄(naphthsao)₄(naphthsaoH)₄] ( 1 ) and [Fe^III₆O₂(naphthsao)₄(O₂CPh)₆] ( 2 ) [naphthsao = 1‐(1‐hydroxy‐naphthalen‐2‐yl)ethanone oxime] were obtained through the reactions of naphthsao ligand and MnCl₂ · 4H₂O or FeCl₃ · 6H₂O in the presence of triethylamine (Et₃N). Their structures were determined by X‐ray single crystal diffraction, elemental analysis, and IR spectra. Complex 1 displays 12‐MC‐4 metallacrown structural type with cube‐like configuration and 2 shows an offset stacked 10‐MC‐3 structural type with the ring connectivity containing Fe–O–C–O–Fe–O–N–Fe–O–N. Magnetic susceptibility measurement reveals the ferromagnetic interactions and field‐induced slow relaxation of the magnetization for 1 , whereas out‐of‐phase signal is not observed for 2 .     

Metabolomic analysis of raw Pinelliae Rhizoma and its alum‐processed products via UPLC–MS and their cytotoxicity

Alum‐processing is a traditional method to attenuate the toxicity of Pinelliae Rhizoma (tubers of Pinellia ternate, PT). The present study aimed at investigating the chemical and cytotoxic changes during alum processing. Metabolomic profiles of raw and alum‐processed PT were studied based on ultra‐performance liquid chromatography coupled with Orbitrap mass spectrometry. More than 80 chemicals in positive MS mode and 40 chemicals in negative MS mode, such as organic acids, amino acids, glucosides and nucleosides, were identified after multivariate statistical analysis, including principal component analysis and orthogonal partial least‐square discriminant analysis. Almost all of the identified chemical markers were significantly decreased ~10‐ to 100‐fold after alum processing. Meanwhile, the correlations between the chemical markers were assimilated to a positive coefficient from disorderly distribution during the processing. Raw PT extracts could inhibit the proliferation of human carcinoma cells (HCT‐116, HepG2, and A549) at the rate of 40.5, 24.8 and 31.6% more strongly than processed PT. It was concluded that the alum processing of PT could decrease the number of actively water‐soluble principles at the same time as decreasing toxicity. Given the water‐insoluble property of toxic calcium oxalate raphides in PT, we suggest that a more scientific processing method should be sought.     

Active Template Synthesis of Protein Heterocatenanes

Covalent‐bond‐forming protein domains can be versatile tools for creating unconventional protein topologies. In this study, through rewiring the SpyTag–SpyCatcher complex to induce rationally designed chain entanglement, we developed a biologically enabled active template for the concise, modular, and programmable synthesis of protein heterocatenanes both in vitro and in vivo. It is a general and good‐yielding reaction for forming heterocatenanes with precisely controlled ring sizes and broad structural diversity. More importantly, such heterocatenation not only provides an efficient means of bioconjugation for integrating multiple native functions, but also enhances the stability of the component proteins against proteolytic digestion, thermal unfolding, and freeze/thaw‐induced mechanical denaturation, thus opening up a versatile path in the nascent field of protein‐topology engineering.     

Progress in DNA Aptamers as Recognition Components for Protein Functional Regulation

Proteins play a central role in all domains of life, and precise regulation of their activity is essential for understanding the related biological processes and therapeutic functions. Nucleic acid aptamers, the molecular recognition components derived from systematic evolution of ligands by exponential enrichment(SELEX), can specifically identify proteins with antibody-like recognition characteristics and help to regulate their activity. This minireview covers the SELEX-based selection of protein-binding aptamers, membrane protein analytical techniques based on aptamer-mediated target recognition, aptamer-mediated functional regulation of proteins, including membrane receptors and non-membrane proteins(thrombin as a model), as well as the potential challenges and prospects regarding aptamer-mediated protein manipulation, aiming to supply some useful information for researchers in this field.     

Comparative analysis of the main active components and hypoglycemic effects after the compatibility of Scutellariae Radix and Coptidis Rhizoma

In this study, a rapid and highly sensitive ultra high performance liquid chromatography with triple quadrupole mass spectrometry method with the mobile phase of acetonitrile and 0.1% aqueous formic acid was established and successfully applied to comparatively analyze main active components after their compatibility. Besides, the effects of Scutellariae Radix, Coptidis Rhizoma and combined extracts on type 2 diabetic rats induced by high‐fat diet along with low dose of streptozocin were investigated. Under the optimized chromatographic conditions, good separation of seven target components was achieved within 12 min. All calibration curves exhibited good linearity (R² ≥ 0.999). The relative standard deviation of precision, repeatability and stability varied from 0.69 to 2.23, 0.98 to 2.56, and 0.92 to 2.57%, respectively. The recovery ranged from 91.11 to 105.35%. The contents of seven active components were notably reduced after compatibility; however, the hypoglycemic effect of combined extracts was stronger than single drug by decreasing the activities of fructose‐1,6‐bisphosphatase, glucose 6‐phosphatase, phosphoenolpyruvate carboxykinase and increasing the activities of glucokinase, phosphofructokinase, pyruvate kinase. Accordingly, the established analytical method was accurate and sensitive enough for quantitative evaluation of seven investigated compounds. Moreover, the combined extract had definite effects on type 2 diabetes through multiple components against multiple targets.     

Synergistic Surface Passivation of CH3NH3PbBr3 Perovskite Quantum Dots with Phosphonic Acid and (3-Aminopropyl)triethoxysilane

CH₃NH₃PbBr₃ perovskite quantum dots (PQDs) are synthesized by using four different linear alkyl phosphonic acids (PAs) in conjunction with (3-aminopropyl)triethoxysilane (APTES) as capping ligands. The resultant PQDs are characterized by means of XRD, TEM, Raman spectroscopy, FTIR spectroscopy, UV/Vis, photoluminescence (PL), time-resolved PL, and X-ray photoelectron spectroscopy (XPS). PA chain length is shown to control the PQD size (ca. 2.9–4.2 nm) and excitonic absorption band positions (λ=488–525 nm), with shorter chain lengths corresponding to smaller sizes and bluer absorptions. All samples show a high PL quantum yield (ca. 46–83 %) and high PL stability; this is indicative of a low density of band gap trap states and effective surface passivation. Stability is higher for smaller PQDs; this is attributed to better passivation due to better solubility and less steric hindrance of the shorter PA ligands. Based on the FTIR, Raman, and XPS results, it is proposed that Pb²⁺ and CH₃NH₃⁺ surface defects are passivated by R−PO₃²⁻ or R−PO₂(OH)⁻, whereas Br⁻ surface defects are passivated by R−NH₃⁺ moieties. This study establishes the combination of PA and APTES ligands as a highly effective dual passivation system for the synergistic passivation of multiple surface defects of PQDs through primarily ionic bonding.