TFSI钝化晶体硅表面性质的第一性原理研究

晶体硅表面钝化是高效率晶体硅太阳能电池的核心技术,直接影响晶体硅器件的性能。本文采用第一性原理方法研究了一种超强酸-双三氟甲基磺酰亚胺(TFSI)钝化晶体硅(001)表面。研究发现,TFSI的四氧原子结构能够与Si(001)表面Si原子有效成键,吸附能达到-5.124 eV。电子局域函数研究表明,TFSI的O原子与晶体硅表面的Si的成键类型为金属键。由态密度和电荷差分密度分析可知,Si表面原子的电子向TFSI转移,从而有效降低了Si表面的电子复合中心,有利于提高晶体硅的少子寿命。Bader电荷显示,伴随着TFSI钝化晶体硅表面的Si原子,表面Si原子电荷电量减少,而TFSI中的O原子和S原子电荷电量相应增加,进一步证明了TFSI钝化Si表面后的电子转移。该工作为第一性原理方法预测有机强酸钝化晶体硅表面的钝化效果提供了数据支撑。     

机械力固相法制备纳米α-FeOOH及其光催化性能研究

采用机械力固相法以FeCl3和Fe(NO3)3分别作为铁源.在铁源与碱1∶5摩尔比的条件下,先球磨3h,再经过60℃水浴陈化得到纳米针铁矿(α-FeOOH).用X-射线衍射仪(XRD)、场发射扫描电子显微镜(FE-SEM)、比表面和孔隙度分析仪(BET)、紫外-可见分光光度计以及电化学工作站对其物相、微观形貌、比表面、光催化和光电化学性能进行表征.结果 表明:不同铁源的阴离子会诱导合成形貌和性能差异的纳米针铁矿,以FeCl3为原料合成的纳米α-FeOOH粒径较小、比表面积及孔容较大、对有机染料罗丹明B的降解率较以Fe(NO3)3为原料的α-FeOOH提高了48.7;.     

不同压力角下自由端面对渐开线直齿轮弹流润滑性能的影响

区别于基于半空间理论的传统直齿轮弹流润滑模型，本文基于有限长空间解建立考虑轮齿自由端面影响的渐开线直齿轮有限长弹流润滑模型. 采用叠加法构造自由端面，矩阵法和半解析法求解自由端面的影响，快速傅里叶变换算法加速齿面弹性变形计算；采用统一Reynolds方程法求解油膜压力和油膜厚度. 以啮合节点为特征位置，分析比较不同压力角下自由端面对直齿轮弹流润滑的影响. 结果表明:与半空间模型比较，考虑自由端面后端面峰值压力降低，压力分布更均匀，最小油膜厚度增大；增大轮齿压力角，节点压力水平减小，油膜厚度增大；当压力角不同时，自由端面对齿轮弹流润滑压力峰值的影响基本相当，对最小膜厚的影响较大.      

In-situ SiN combined with etch-stop barrier structure for high-frequency AlGaN/GaN HEMT

The etch-stop structure including the in-situ SiN and AlGaN/GaN barrier is proposed for high frequency applications.The etch-stop process is realized by placing an in-situ SiN layer on the top of the thin AlGaN barrier.F-based etching can be self-terminated after removing SiN,leaving the AlGaN barrier in the gate region.With this in-situ SiN and thin barrier etch-stop structure,the short channel effect can be suppressed,meanwhile achieving highly precisely controlled and low damage etching process.The device shows a maximum drain current of 1022 mA/mm,a peak transconductance of 459 mS/mm,and a maximum oscillation frequency(fmax)of 248 GHz.     

Applicability of ~9Be global optical potential to reactions of ~(7,10,11,12)Be

Elastic scattering angular distributions and total reaction cross-sections of ~(7,10,11,12)Be projectiles are predicted by the systematic ~9 Be global phenomenological optical model potential for target mass numbers ranging from24 to 209. These predictions provide a detailed analysis by their comparison with the available experimental data.Furthermore, these elastic scattering observables are also predicted for some targets out of the mass number range.The results are in reasonable agreement with the existing experimental data, and they are presented in this study.     

The 10 kW Level High Brightness Face-Pumped Slab Nd:YAG Amplifier with a Hybrid Cooling System

We demonstrate a high power, high brightness, slab amplifier based on face-pumped Nd:YAG slab gain modules,having a high efficient hybrid cooling system of the conduction cooling and forced convection cooling. Using a single gain module, a laser output power up to 4.5 kW with a remarkable optical-optical conversion efficiency of 51% is realized, indicating an excellent lasing performance of the Nd:YAG slab module. The amplifier operates at a repetition rate of 700 Hz and delivers a maximum average output power exceeding 10.5 kW with pulse duration of 150us. A good beam quality factor is measured to be β = 1.9. To the best of our knowledge, this is the highest brightness for a 10 kW level Nd:YAG slab amplifier.     

以时温等效方法研究尼龙1010应力松弛行为及使用寿命预测

以尼龙材料的应力松弛行为作为研究对象, 考察初始应变为1.0%, 2.8%和5.1%的尼龙1010样品在温度区间293353 K的松弛曲线, 采用时间-温度等效叠加方法得到了松弛模量主曲线, 计算出叠加过程中的表观活化能、 松弛过程中的活化体积和应力辅助功. 结果表明, 整个松弛过程中的表观活化能和应力辅助功表现出相同的变化趋势, 体现出松弛过程中克服运动单元位垒的过程. 当293323 K区间的松弛曲线叠加时, 随着初始应变的增加, 表观活化能和应力辅助功均逐渐降低, 有助于聚合物内部的运动单元越过能垒发生松弛, 与松弛过程中的应力辅助热活化理论相一致; 当333353 K区间的松弛曲线叠加时, 不同初始应变样品的表观活化能均为260 kJ/mol, 应力辅助功均为60 MPa·nm³, 说明松弛过程中克服运动单元的能垒与应力作用无关. 根据松弛主曲线, 计算出了尼龙1010在1.0%, 2.8%和5.1% 3种形变下, 长时间范围内应力衰减与时间的关系, 为预测实际使用过程中的应力松弛行为提供了依据.