单分散键合型含铕聚苯乙烯微球的制备与荧光传感性能

制备了一种可定性定量检测水溶液中三价铁离子的含铕聚苯乙烯微球, 分别用固体核磁碳谱(¹³C CP/MAS NMR)、 傅里叶变换红外光谱(FTIR)、 X射线光电子能谱(XPS)、 扫描电子显微镜(SEM)、 透射电子显微镜(TEM)、 元素分析、 粒度分析和ζ电位分析等对其化学组成和结构形貌进行表征. 当铕配合物单体用量低于2.5%时, 可以得到稳定的单分散键合型含铕聚苯乙烯微球. 用紫外光激发时, 该含铕聚苯乙烯微球发射铕离子的特征红光. Fe³⁺能猝灭该微球的荧光, 酸根离子和其它金属离子对其干扰较少; 猝灭效率与Fe³⁺浓度在0~300 μmol/L浓度范围内均呈线性关系; 随着铕配合物单体用量的增加, 微球的荧光增强, 其在检测Fe³⁺的荧光时, 猝灭常数(K_SV)增加, 检测限(LOD)下降. 调节铕配合物单体的用量, 可获得热性能优异、 红光发射强度高且稳定性好的单分散聚苯乙烯荧光微球, 对Fe³⁺荧光检测显示出较高的选择性, 在生物检测和环境保护等领域具有较高的应用价值.     

TFSI钝化晶体硅表面性质的第一性原理研究

晶体硅表面钝化是高效率晶体硅太阳能电池的核心技术,直接影响晶体硅器件的性能。本文采用第一性原理方法研究了一种超强酸-双三氟甲基磺酰亚胺(TFSI)钝化晶体硅(001)表面。研究发现,TFSI的四氧原子结构能够与Si(001)表面Si原子有效成键,吸附能达到-5.124 eV。电子局域函数研究表明,TFSI的O原子与晶体硅表面的Si的成键类型为金属键。由态密度和电荷差分密度分析可知,Si表面原子的电子向TFSI转移,从而有效降低了Si表面的电子复合中心,有利于提高晶体硅的少子寿命。Bader电荷显示,伴随着TFSI钝化晶体硅表面的Si原子,表面Si原子电荷电量减少,而TFSI中的O原子和S原子电荷电量相应增加,进一步证明了TFSI钝化Si表面后的电子转移。该工作为第一性原理方法预测有机强酸钝化晶体硅表面的钝化效果提供了数据支撑。     

Coupling characteristics of laterally coupled gratings with slots

Laterally-coupled ridge-waveguide distributed feedback lasers fabricated without epitaxial regrowth steps have the advantages of process simplification and low cost. We present a laterally coupled grating with slots. The slots etched between the ridge and grating area are designed to suppress the lateral diffusion of carriers and to reduce the influence of the aspect-ratio-dependent-etching effect on the grating morphology in the etching process. Moreover, the grating height in this structure can be decreased to lower the aspect ratio significantly, which is advantageous over the conventional laterally coupled ridge waveguide gratings. The effects of five main structural parameters on the coupling characteristics of gratings are studied by MODE Solutions. It is found that varying the lateral width of the grating can be used as an effective way to tune the coupling strength; narrow slots (100 nm and 300 nm) and wide ridge (2 μm-4 μm) promote the stability of grating coupling coefficient and device performance. It is important to note that the grating bottom should be fabricated precisely. The comparative study of carrier distribution and mode field distribution shows that the introduction of narrow slots can strengthen the competitive advantage and stability of the fundamental mode.     

弹簧-金属丝网橡胶组合减振器迟滞力学模型及实验研究

金属丝网橡胶材料是一种完全由金属丝编织成的多孔复合材料,与传统螺旋卷制金属橡胶材料相比,其改进了成型工艺,剔除了制备过程中大量的手工工艺干扰,提高机械化程度,重合度更高,拥有更稳定的力学性能.由于金属丝网橡胶材料具有承载能力高、阻尼大、耐高温、耐低温、耐老化、抗油抗腐蚀等优良特性,在很多方面强于传统橡胶,多用于航空航天、船舶、军事武器等军工工业.弹簧-金属丝网橡胶组合减振器具有可设计刚度和较高承载能力,但因其具有复杂的非线性迟滞特性,目前相关材料的本构模型还难以准确描述其力学特性.本文在弹簧-金属丝网橡胶组合减振器静态迟滞力学性能实验的基础上,结合其干摩擦阻尼迟滞特性,提出了一种迟滞力学性能理论模型.根据减振器迟滞实验恢复力-位移曲线特点,利用参数分离的方法将迟滞曲线分解为弹性恢复力和干摩擦阻尼力,分别建模求解等效刚度和干摩擦阻尼系数,以此建立了组合减振器理论模型,并与实验结果进行对比及进行误差分析,验证了理论模型的准确性.     

拉伸载荷作用下单边缺陷-边裂纹应力强度因子研究

利用杂交位移不连续法研究拉伸载荷作用下矩形板中单边缺陷-边裂纹(半圆孔裂纹和半方孔裂纹)问题,给出了这三种平面弹性裂纹问题的应力强度因子的详细数值解。通过半圆孔裂纹问题和半方孔裂纹问题与单边裂纹问题的应力强度因子的比较,发现半圆孔和半方孔对单边裂纹有屏蔽影响。此外,本文的研究结果表明,杂交位移不连续法用于分析平面弹性有限体中复杂裂纹问题的应力强度因子简单且又准确。     

塞曼效应仿真实验平台

塞曼效应实验是学生了解原子具有磁矩和空间取向量子化现象的重要实验,至今塞曼效应仍是研究能级结构的重要方法之一.为了能够让学生更加清楚地了解塞曼效应实验的基本原理和操作规程,针对教学中的重点和难点,运用flash软件制作出塞曼效应仿真实验.该程序可全程高度仿真实验过程,具有界面友好、易于操作、无需安装等优点.为实验教学提供了一种新的辅助方式.     

基于深度学习的离轴菲涅耳数字全息非线性重构

针对离轴菲涅耳数字全息图,提出基于深度学习的单幅数字全息非线性重构方法 .采用经典的菲涅耳衍射积分模拟数字全息成像以供给网络训练所需样本,利用深度卷积残差神经网络通过学习数字全息图与相关物像之间的非线性数学映射关系实现全息图的物像重构.数值模拟表明,与传统的频率滤波和四步相移技术实现菲涅耳数字全息重构相比,本文提出的方法可直接消除零级像及孪生像,无需条纹物项抽取预处理步骤,且重构的物像具有较高的质量,针对相同记录参考光下不同衍射距离所生成的测试集亦具有较强的稳健性.     

Simultaneous measurement of SO2 and NO2 concentration using an optical fiber-based LP-DOAS system

SO2 and NO2 are the most important pollution in atmosphere.An optimized long path(LP)differential optical absorption spectroscopy(DOAS)system of high light intensity at an ultraviolet(UV)wavelength is proposed and used to measure the concentration of SO2 and NO2 simultaneously.In contrast to the traditional DOAS,the system adopted a Y-type optical fiber structure instead of a combination of mirrors in the telescope.The UV light intensity test shows that the light intensity of UV can arrive to above 80% of the max measuring range when the light path reaches 135 m,and the integral time of the spectrograph is only 15 ms.The system is proved to be efficacious through laboratory calibration.The maximum error of SO2 calibration is 4.19%,and is 5.22% for NO2.The error of the SO2 and NO2 mixture calibration is within 10%.Field measurement is implemented in a wastewater treatment plant in winter.The measurement light path is 738 m.The concentration of SO2 varies from 6μg/m^3(2.26 ppb)to 20μg/m^3(7.52 ppb),and the concentration of NO2varies from 100μg/m^3(53.2 ppb)to 200μg/m^3(106.4 ppb)approximately.The results are in accordance with the data from a monitoring station nearby in magnitude order and variation tendency mostly.     

过氧化钙制备实验的改进 ——以鸡蛋壳为原料

Instead of calcium chloride, we used egg shells as material in the experiment for synthesis of calcium peroxide. This could help to improve students' environmental consciousness and stimulate students' interest in experiment. We designed procedures for egg shells pre-treatment and the synthesis of calcium peroxide, which were suitable for students. The amount of hydrogen peroxide and ammonia was optimized. The yield of anhydrous calcium peroxide was about 70% with a great than 75% purity.     

茶叶中咖啡因的提取实验装置的改进与探索

"茶叶中咖啡因的提取"是有机化学实验的一个经典实验,本文对该实验所用的原索氏提取器进行改进,得到内通气集热式索氏提取器并用于实验教学。通过对照实验,对改进索氏提取器和原索氏提取器的提取效果进行比较。结果表明,改进装置具有原装置的功能和特点,且提取时间更短、提取温度和提取率更高,可在高校推广使用。