Boussinesq方程行波解的存在性

利用平面动力系统方法的分支理论，研究了Boussinesq方程，通过对Boussinesq方程进行行波变换，得到了相应行波系统的首次积分和平衡点，给出了不同参数条件下的相图，证实了Boussinesq方程存在孤立波解和周期波解。     

Coupling characteristics of laterally coupled gratings with slots

Laterally-coupled ridge-waveguide distributed feedback lasers fabricated without epitaxial regrowth steps have the advantages of process simplification and low cost. We present a laterally coupled grating with slots. The slots etched between the ridge and grating area are designed to suppress the lateral diffusion of carriers and to reduce the influence of the aspect-ratio-dependent-etching effect on the grating morphology in the etching process. Moreover, the grating height in this structure can be decreased to lower the aspect ratio significantly, which is advantageous over the conventional laterally coupled ridge waveguide gratings. The effects of five main structural parameters on the coupling characteristics of gratings are studied by MODE Solutions. It is found that varying the lateral width of the grating can be used as an effective way to tune the coupling strength; narrow slots (100 nm and 300 nm) and wide ridge (2 μm-4 μm) promote the stability of grating coupling coefficient and device performance. It is important to note that the grating bottom should be fabricated precisely. The comparative study of carrier distribution and mode field distribution shows that the introduction of narrow slots can strengthen the competitive advantage and stability of the fundamental mode.     

真空度对脉动热管传热性能的影响

实验研究了真空度对以去离子水和Al_2O_3/H_2O纳米流体为工质的脉动热管传热性能的影响,其中真空度的变化范围在-0.014～-0.098 MPa之间。研究发现真空度对脉动热管的启动和加热功率大于90 W的稳定运行过程的传热均有重要影响。蒸发段的启动功率随真空度的上升而降低。同时,加入Al_2O_3纳米粒子更有利于脉动热管的启动,其蒸发段启动热阻低于同等条件下去离子水的启动热阻。此外,加热功率大于90 W时,去离子水蒸发段的温度会发生剧烈的脉动,且随真空度不断上升,剧烈脉动的现象更加明显,原因可能是高真空度影响了液膜蒸发,使脉动热管的流型提前由弹状流转变到环形流。但加入Al_2O_3纳米粒子后并没有发生剧烈的脉动,可能是纳米粒子的加入延缓了这一现象的产生。     

从科研中提炼出的精细化工专业实验:新型疏水缔合聚合物的制备、表征及性能测定*

结合教师科研项目,推荐一个精细化工专业实验:疏水缔合聚合物的制备、表征及性能测定。通过该实验可以使学生掌握自由基共聚法制备聚合物的基本原理,掌握一些大型仪器的基本操作、聚合物常用的表征手段及结构分析方法,理解疏水缔合聚合物结构与性能之间深层次的理论联系。该实验项目来源于科研,服务于实践,集聚合反应、结构表征、大分子溶液理化性能测试于一体,具有综合性、前沿性、研究性等特点。本实验的开设有利于提高精细化工方向学生的专业实验水平,提升学生的综合探究素质、创新意识及动手能力。     

Simultaneous measurement of SO2 and NO2 concentration using an optical fiber-based LP-DOAS system

SO2 and NO2 are the most important pollution in atmosphere.An optimized long path(LP)differential optical absorption spectroscopy(DOAS)system of high light intensity at an ultraviolet(UV)wavelength is proposed and used to measure the concentration of SO2 and NO2 simultaneously.In contrast to the traditional DOAS,the system adopted a Y-type optical fiber structure instead of a combination of mirrors in the telescope.The UV light intensity test shows that the light intensity of UV can arrive to above 80% of the max measuring range when the light path reaches 135 m,and the integral time of the spectrograph is only 15 ms.The system is proved to be efficacious through laboratory calibration.The maximum error of SO2 calibration is 4.19%,and is 5.22% for NO2.The error of the SO2 and NO2 mixture calibration is within 10%.Field measurement is implemented in a wastewater treatment plant in winter.The measurement light path is 738 m.The concentration of SO2 varies from 6μg/m^3(2.26 ppb)to 20μg/m^3(7.52 ppb),and the concentration of NO2varies from 100μg/m^3(53.2 ppb)to 200μg/m^3(106.4 ppb)approximately.The results are in accordance with the data from a monitoring station nearby in magnitude order and variation tendency mostly.     

面向任务的无人机照相侦察航迹规划算法

针对当前无人机照相侦察获取的影像数据很难满足后端情报处理要求的问题,提出了一种面向任务的无人机照相侦察航迹规划算法。首先基于情报处理的航迹预规划,结合无人机情报处理和航迹规划的耦合关系来完成航迹参数的解算。然后提出η形转弯策略,在最小转弯半径约束下,以最小路径代价完成相邻航带间的转弯航迹规划。最后确定侦察区域内的照相序列,来实现区域全覆盖侦察。实验结果表明,较常规U形转弯策略而言,算法路径代价降低了15%左右。     

高效液相色谱-串联质谱法测定磷酸西格列汀中基因毒性杂质乙二胺的含量

通过对甲苯磺酰氯对乙二胺进行衍生化,采用高效液相色谱-串联质谱法(HPLC-MS/MS)测定磷酸西格列汀中基因毒性杂质乙二胺的含量。以Waters CORTECS^? C₁₈色谱柱为固定相,以不同体积比的5 mmol·L^-1乙酸铵-乙酸缓冲溶液(pH 5.6)和乙腈的混合溶液为流动相进行梯度洗脱。串联质谱分析中采用电喷雾离子源正离子(ESI⁺)模式,选择反应监测(SRM)模式。乙二胺的线性范围为0.50～33.5μg·L^-1,检出限(3.3s/k)为0.55μg·L^-1,以空白样品为基体进行加标回收试验,所得回收率为102%～103%。对平行配制的6份加标供试品溶液进行重复性和重现性试验,所得测定值的相对标准偏差均小于3.0%。     

基于LSTM的浮选钼精矿品位软测量模型

战略性稀有金属钼矿品位低,组分复杂、嵌布粒度细等特点,其有价金属分离回收难。浮选作为微细粒钼矿分离回收的主要选矿方法之一,其浮选钼精矿品位一直是选厂的关键性产品指标。国内大多数选厂采取轮班制采样,人工化验得到精矿品位结果,但此方式严重滞后于浮选工艺,难以满足对生产过程进行实时监测和操作指导。LSTM是一种特殊的循环神经网络,引入门机制有效的传递或选择性遗忘长时间序列中的信息,解决RNN中的长期依赖、梯度消失和爆炸问题。本文分析整理东坡选厂中各平台源数据,结合选厂浮选工艺及机理,筛选出多个影响浮选钼精矿品位的变量作为模型输入;将输入变量进行异常值判定,缺失值填充和数据降噪等数据预处理,建立高质量浮选钼精矿品位数据库;软测量模型采用PyCharm软件编码,使用BatchNorm批量规范化处理样本数据,加入Dropout正则化防止过拟合,建立基于LSTM的浮选钼精矿品位软测量模型,通过前向传播算法更新神经网络结构参数,并于Linear模型和CNN模型的预测性能指标结果比较。结果表明：基于LSTM的浮选钼精矿品位软测量模型预测准确度高,样本数据误差波动平稳,浮动范围小,模型泛化能力强,模型平均绝对百分比误差MAPE为1.13%,均方根误差RMSE为0.7049%,决定系数R2为0.8763,实现了浮选钼精矿品位的在线预测。     

超高效液相色谱-串联质谱法测定烟用水基胶中邻苯二甲酸酯类化合物

建立了一种测定烟用水基胶中17种邻苯二甲酸酯类(PAEs)化合物的超高效液相色谱-串联质谱(UPLC-MS/MS)法。样品经水分散,以甲醇定容,涡旋振荡萃取。萃取液离心后,过有机相滤膜进行UPLC-MS/MS分析。通过增加延时柱的方法,排除色谱系统带入的PAEs干扰。结果表明:在0~5μg/m L范围内,方法的线性关系良好,相关系数均大于0.994,定量下限为0.010~0.479μg/g。该方法的回收率为87.6%~106.0%,相对标准偏差(RSD,n=6)为0.8%~6.2%。将该方法与YC/T 333-2010标准方法进行对比,结果显示两种方法的检测数据不存在显著性差异。方法用于烟用水基胶中17种PAEs的测定,操作简单,稳定性好。