一种高品质中空金属光波导

讨论了高品质中空金属光波导的工作原理及其制作工艺，制备了以金和银作为波导材料的中空波导管，并对空芯以及充入不同透明液体的液芯波导的透光特性进行了测试，结果表明：与中空介质波导相比，中空金属波导具有光传输损耗低，透过率对波导弯曲与失调不甚敏感等优点；而液芯金属波导的透光效率与透明材料的折射系数无关。文中描述了在特定波段内“中空光纤”的原理，并报道了Ｈｅ－Ｎｅ和ＣＯ２激光在中空金壁波导传输的实验结果。     

LASING FROM A DYE-DOPED PENDANT DROP AND ITS PRECESSION

We have observed lasing from the rim of dye-doped ethylene glycol pendant drops. Spatial-resolved spectral measurements show that the lasing wavelength varies along a vertical rim of the drop. Time-resolved measurements indicate that lasing precession occurs within the drop. Various lasing patterns due to lasing precession are explained. The measured precession periods for different pumping points are in good agreement with the calculated values based on morphology-dependent resonance theory.     

折射率改变为正的光折变晶体中形成一维光伏暗孤子

提出了一个考虑背景光光伏效应贡献的光伏孤子理论,它指出在折射率变化为正的晶体中,既可产生光伏亮孤子,也可产生光伏暗孤子.当背景光对信号光的有效Glass系数之比为R小于1时,孤子是亮的;R大于1时,孤子是暗的.对亮孤子而言,R值越大,孤子越宽,而对暗孤子,R值越大,孤子越窄.当R为1时,不能形成光伏孤子.一维暗孤子实验结果与理论一致. 关键词： 光折变空间孤子 光伏孤子 暗孤子 正折射率改变     

全光双准稳态空间孤子

观察到一种双准稳态光折变空间孤子.这种孤子是(1+1)维的.它的形成不需要外加电场,是全光的.孤子的形成过程具有全光开关效应 关键词： 光折变空间孤子 双准稳态 全光开关     

Lasing features of dye—doped pendant drops added with polymer particles：spectral blueshift and intensity enhancement

When micrometre-sized polymer particles were added into a dye-doped pendant drop that acted as a quasi-two-dimensional circular resonator,we found a blueshift of the peak wavelength of its lasing spectrum.The lasing output was also enhanced by the particles.The spectral blueshift was explained by a model of dye lasing in a circular cavity.The model includes losses of the scattering particles,medium absorption,and radiation leakage,An optimum particle density for maximum lasing output was deduced.The results are consistent with our experimental findings.     

圆孔的菲涅耳衍射

得到了圆孔菲涅耳衍射光强分布的表达式,此式由贝塞尔函数的数列(或Lommel函数)给出,因此很容易利用普及的数学软件算出结果.并且利用CCD照相机量度了衍射光强分布,与运算的结果作了比较,也与Burch在1985报导的结果作了比较.     

Cu:KNSBN晶体中复色光自泵浦相位共轭猝灭实验及其理论解释

当用５１４.５ｎｍＡｒ^＋激光束入射到掺Ｃｕ的ＫＮＳＢＮ晶体中时，观察到典型的猫型自泵浦相位共轭，而当用５１４.５和４８８ｎｍＡｒ^＋激光束共线入射到该晶体中时，观察到自泵浦相位共轭猝灭现象．对这一现象给出了一个理论解释 关键词：     

光折变“波导”诱失锁模ps激光脉冲自泵浦相位共轭

观察到失锁模５３２ｎｍｐｓ激光脉冲单独入射到掺Ｃｕ的ＫＮＳＢＮ晶体中，不能产生自泵浦相位共轭，但如果先用同波长的锁模ｐｓ激光脉冲在晶体中预制一条光折变“波导”，则可诱导失锁模激光脉冲形成自泵浦相位共轭．分别从“波导”形成和时间分辨光谱等方面研究了这一现象 关键词：     

Figure of Merit for Detectors Based on Laser-Induced Thermoelectric Voltages in La1-xCaxMnO3 and YBa2Cu3O7-σ Thin Films

A figure of merit （FOM） Z = Up/τr, where Up is thepeak voltage, and τr is the rise time of the laser-induced thermoelectric voltage （LITV） signal, is defined for photodetector based on the LITV and the influence of the parameters on FOM is analysed based on the time dependence of LITVs in La1-xCaxMnO3 （LCMO） and YBa2Cu3O7-σ （YBCO） thin films grown on vicinal-cut substrates. We find that the FOM increases as the photon penetration depth decreases, and linearly increases with the thermal diffusion constant D. To achieve the highest FOM, the film thickness d has to be controlled to an optimum value. We also find that the FOM is directly proportional to the laser absorption coefficient no, the laser energy density per pulse E, the illuminated length of film 1, sin（2α） [αis the vicinal-cut angle], the Seebeck coefficient anisotropy （ Sab - Sc）, and is inversely proportional to the mass density ρ and the specific heat c0.     

球壳换能器电声效率测量方法及声场特性分析

在高强度聚焦超声治疗系统中,换能器的电声效率是治疗剂量控制中的重要参数,其在焦域附近的声场分布同样重要。该研究以球壳聚焦换能器为研究对象,基于辐射力天平法与平面扫描法进行输出声功率的测量,同时测量其激励电功率后计算得到电声效率,并就其声场特性分布以及存在的非线性传播现象进行了简单阐述。两种测量方法测得的电声效率在声学计量的误差允许范围内,实验结果表明两种方法在测量球壳聚焦换能器输出声功率时具备较好的一致性。