排序方式: 共有24条查询结果,搜索用时 15 毫秒
1.
研究实现了基于半导体可饱和吸收体被动锁模的高重频全光纤掺镱皮秒脉冲激光器.种子源采取环形腔结构,当抽运功率为112mW时,获得了稳定的锁模脉冲激光,其中心波长为1 064.1nm,3dB谱宽为3.6nm,脉冲宽度为4.2ps,重复频率为19.2MHz.受限于谐振腔长度,光纤激光器重复频率很难得到进一步提高.因此设计并搭建了一种基于分束器和延时光纤的全新低损耗高重频脉冲调制器,将种子激光重复频率提高到1.2GHz.该设计有效降低了脉冲在耦合过程中的能量损耗,为提高全光纤超短脉冲激光器重复频率提供了新途径. 相似文献
2.
3.
4.
研制出光敏偏振保持掺Er3+光纤,通过在这种光纤上紫外写入三个光纤光栅,形成对抽运激光高转化效率的谐振腔.在输出功率为23.617dBm、工作波长为976nm的激光抽运下,得到均值功率为9.20dBm、均值中心波长为1554.554nm的单波长激光输出.在室温下800min(约13.3h)的测量时间内,其输出功率的波动为±0.05dB,中心工作波长的波动为±0.0015nm.
关键词:
光纤激光器
3+光纤')" href="#">偏振保持掺Er3+光纤
光纤Bragg光栅 相似文献
5.
基于实验测试结果分析了用于大功率光纤激光器的石英基包层抽运掺Yb3+光纤中Al3+共掺的特性.揭示出在高掺Yb3+的石英基光纤中,共掺Al3+的摩尔浓度为Yb3+摩尔浓度的9-11倍时既可以减小Yb3+的浓度猝灭概率,又可以获得高吸收系数,同时还可更好地满足数值孔径的要求的结论.在此基础上利用MCVD设备并结合湿法掺杂工艺制作出多根石英基掺Yb3+光纤预制棒,对拉丝后光纤的相关参数测试表明,通过精确控制疏松层的沉积温度,掺Yb3+光纤在976 nm波长的吸收系数可高达620 dB/m,且重复性好.这一结论为共掺Al3+的掺Yb3+光纤制作提供了良好的借鉴作用. 相似文献
6.
Ultra-Long Haul L-Band WDM Transmission over a Standard Single-Mode Fibre Loop Using DCF+CFBG Hybrid Dispersion Compensation 下载免费PDF全文
We demonstrate a 10. 7Gb/s-line-rate L-band wavelength-division-multiplexer (WDM) loop transmission over a 1890-kin standard single-mode fibre (SSMF) with a 100-km amplifier spacing as well as non-return-to-zero (NRZ) format. The dispersion compensating fibre (DCF) plus chirped tibre Bragg grating (CFBG) is employed for hybrid inline dispersion compensation. The power penalty of each channel is less than 3 dB after three-loop transmission. The experimental results show that high-performance CFBGs can be successfully used in ultra-long haul (〉 1000km) WDM systems. We also point out that the all-CFBG compensation scheme is not suitable for re-circulating loop transmissions. 相似文献
7.
8.
9.
同时考虑接收光信噪比(OSNR)及非线性失真影响,对分布式光纤拉曼放大器在长距离光传输系统中的最优抽运方式进行了研究.利用变分法原理获得了在不记双瑞利背散射(DRB)影响时的最优信号功率分布函数——均匀分布,但考虑双瑞利散射影响时则不存在解析的最优分布函数.在分别考虑长、短光纤跨距的情况下,比较了三种具有代表性的分布式光纤拉曼放大方式,即双向二阶拉曼抽运、双向一阶拉曼抽运和拉曼+掺铒光纤放大器混合放大方式的性能.指出通过优化一阶抽运波长以及一阶到二阶抽运功率比,对称结构的双向二阶抽运在绝大部分情况下可以在
关键词:
光纤拉曼放大器
双瑞利背散射
变分法
光纤非线性 相似文献
10.
The system of L-band 2×10 Gb/s WDM transmission over conventional single mode fibre with 600 km by chirped fibre Bragg gratings dispersion compensation 下载免费PDF全文
A chirped fibre Bragg grating according to ITU-T suggested L-band (2nd channel λ1 = 1570.83 nm; 80th channel λ2 = 1603.57 nm) with more than 1800 ps/nm single channel dispersion compensation is presented in this paper, of which the cladding mode loss, the delay curve ripple and the power fluctuation of the reflected spectrum are less than 0.5 dB, 50 ps and 0.25 dB, respectively. With this new FBG as dispersion compensation device, a 2 × 10 Gb/s wavelength division multiplexing (WDM) L-band transmission of 600 km based on conventional single mode fibre (G.652 fibre) is performed without forward error correction. The bit error rate (BER) is less than 10-12 and the power penalties of the 2nd and 80th channel of L-band are 1.8 dB and 2.0 dB, respectively. 相似文献