排序方式: 共有14条查询结果,搜索用时 15 毫秒
1.
本文报道利用单辊方法制备的非晶Nd_3Fe_(81)B_(16)合金的晶化及其对磁性和Mossbauer谱的影响。发现在非晶Fe_(81)B_(19)合金中用3at%Nd取代B,使非晶Fe_(81)B_(19)合金的晶化温度提高88℃。在适当的退火条件下晶化后样品在室温下的磁性是:σ_2=189emu/g,σ_r/σ_5=0.7,_iH_c=2.15kOe,B_r≈12kG,_bH_c=2kOe,(BH)_(max)≈8MGOe。与目前广泛使用的六角铁氧体相比,_bH_c相近,但B_r和(BH)_(max)远比六角铁氧体高。这种材料仅含有少量的Nd,因此可能开发为一种新的廉价永磁材料。本文对少量Nd的添加对非晶FeB合金的晶化温度,磁性和Mossbauer谱的影响进行了讨论。初步探讨了高矫顽力的来源,认为它的磁化和反磁化过程可以用畴壁钉扎理论解释。 相似文献
2.
Effect of Cu doping on the magnetic and electrical properties of n=2 Ruddlesden-Popper manganates 下载免费PDF全文
A series of polycrystalline Cu-doped n=2 Ruddlesden-Popper manganates La1.2Sr1.8CuzMn(2-x)O7 (x=0, 0.04, 0.13) were synthesized by the solid state reaction method. The effect of Cu doping on the magnetic and transport properties has been studied. It is found that Cu substitution for Mn greatly affects the magnetic and electrical properties of the parent phase La1.2Sr1.8Mn2O7. With the increase of Cu content, the system undergoes a transition from longrange ferromagnetic order to the spin glass state and further to an antiferromagnetic order. A little of Cu dopant can lead to the samples showing semiconductor or insulator behaviour in the whole observed temperature range while the parent phase has a metal-insulator transition. These samples show colossal magnetoresistance at low temperatures and the value of it decreases with increasing Cu content. 相似文献
3.
4.
用固相烧结的方法成功制备了层状钙钛矿锰氧化物La1.2Sr1.8Cu0.04Mn1.96O7西多晶样品。研究发现,在层状钙钛矿La1.2Sr1.8Mn1.96O7中,用Cu替代Mn对其磁、电的性质影响非常显著。随温度的降低样品表现出从顺磁(PM)到铁磁(FM)及自旋玻璃态(SG)等复杂的磁相变行为。电性测量表明,在整个观察的温区内都表现出绝缘体或半导体的性质。对电阻率.温度曲线进行拟合表明:在低温区采用变程跳跃模型和在高温区采用小极化子模型都得到了较好的线性关系。 相似文献
5.
Arrays of Ni nanowires with different wire diameters were prepared by electrodepositing the corresponding material into cylindrical pores of anodic alumina templates. A transition of the easy magnetization direction has been observed from the wire axis to the transverse direction when the wire diameter increases. It is analytically 相似文献
6.
7.
本文报道利用单辊方法制备的非晶Nd3Fe81B16合金的晶化及其对磁性和M?ssbauer谱的影响。发现在非晶Fe81B19合金中用3at%Nd取代B,使非晶Fe81B19合金的晶化温度提高88℃。在适当的退火条件下晶化后样品在室温下的磁性是:σs=189emu/g,σr/σs=0.7,iHc=2.15kOe,Br≈12kG,bHc=2kOe,(BH)max≈8MGOe。与目前广泛使用的六角铁氧体相比,bHc相近,但Br和(BH)max远比六角铁氧体高。这种材料仅含有少量的Nd,因此可能开发为一种新的廉价永磁材料。本文对少量Nd的添加对非晶FeB合金的晶化温度,磁性和M?ssbauer谱的影响进行了讨论。初步探讨了高矫顽力的来源,认为它的磁化和反磁化过程可以用畴壁钉扎理论解释。
关键词: 相似文献
8.
Tubular Co3O4 nanostructures were prepared from cobalt nanowires embedded in an anodic alumina template. The morphologies of nanowires/nanotubes were studied by transmission electron microscopy, and x-ray diffraction was used in the analysis of the nanostructures and phases. A possible formation mechanism of the process from nanowires to nanotubes is discussed. The vibrating sample magnetometer measurements show anomalous magnetic behaviour of the cobalt oxide nanotubes at low temperature. 相似文献
9.
10.
采用sol-gel方法制备M型六角锶铁氧体.利用X射线衍射,透射电子显微镜和VSM对纳米晶样品进行了研究.当焙烧温度小于或等于800℃,样品存在复相.在同样条件下,压成薄片的样品呈现了硬磁与软磁SrFe12O19/γ-Fe2O3的纳米复合相的磁性交换耦合作用.800℃焙烧的薄片样品的比饱和磁化强度σS为75.6A*m2/kg,内禀矫顽力HcJ为478.9kA/m,最大磁能积(BH)max为14.9kJ/m3,而粉末样品相应的分别为75.9 A*m2/kg,509.6 kA/m和12.1 kJ/m3.当焙烧温度大于850℃时,只有单一M相. 相似文献