排序方式: 共有22条查询结果,搜索用时 25 毫秒
1.
Open-circuit voltage analysis of p-i-n type amorphous silicon solar cells deposited at low temperature 下载免费PDF全文
This paper identifies the contributions of p-a-SiC:H layers and i-a-Si:H layers to the open circuit voltage of p-i-n type a-Si:H solar cells deposited at a low temperature of 125 C.We find that poor quality p-a-SiC:H films under regular conditions lead to a restriction of open circuit voltage although the band gap of the i-layer varies widely.A significant improvement in open circuit voltage has been obtained by using high quality p-a-SiC:H films optimized at the "low-power regime" under low silane flow rates and high hydrogen dilution conditions. 相似文献
2.
近几年,钙钛矿/硅异质结叠层太阳电池发展迅速,效率已经从13.7%提升到29.1%.由于叠层电池器件的制作工艺复杂,而叠层太阳电池中的光学损失对转换效率的影响很大,所以通过光学模拟进而获得高效电池至关重要.本文首先从商业软件和自建模型两方面概述了光学模拟的方法,接着从反射损失和寄生吸收两方面针对光学模拟研究进展进行了总结和分析,最后指出了叠层电池光学模拟过程中需要注意的问题.钙钛矿/硅异质结叠层太阳电池的转换效率极限最高可达40%,具备很大的提升空间,结合模拟工作的研究,叠层电池的发展将会取得更大的进步. 相似文献
3.
本文研究了薄膜厚度对MOCVD技术制备未掺杂ZnO薄膜的微观结构和电学特性影响。XRD和SEM的研究结果表明,随着薄膜厚度的增加,ZnO薄膜(110)峰趋于择优取向,且晶粒逐渐长大,薄膜从球状和细长棒状演变为具有类金字塔绒面结构特征的ZnO薄膜;Hall测量表明,较厚的ZnO薄膜有助于提高薄膜电学特性,可归于晶粒长大和晶体质量提高。40m in沉积时间(膜厚为1250nm)制备出的ZnO薄膜具有明显绒面结构,其晶粒尺寸为300~500nm,电阻率为7.9×10-3Ω.cm,迁移率为26.8 cm2/Vs。 相似文献
4.
研究了衬底温度对MOCVD技术制备的ZnO薄膜的微观结构和光电特性影响. XRD和SEM的研究结果表明,衬底温度对ZnO薄膜的微观结构有显著影响,明显的形貌转变温度大约发生在175℃,低于175℃,薄膜呈镜面结构,晶粒为球状,高于177℃的较高温度范围,薄膜从“类金字塔”状的绒面结构演化为“岩石”状显微组织;随着温度增加,薄膜的晶粒尺寸明显增大.绒面结构的未掺杂ZnO薄膜具有17.96 cm2/V·s的高迁移率和3.28×10-2 Ω·cm的低电阻率,对ZnO薄膜的进一步掺杂和结构优化有望应用于Si薄膜太阳电池的前电极.
关键词:
MOCVD
ZnO薄膜
透明导电氧化物
太阳电池 相似文献
5.
采用直流脉冲磁控溅射方法,在室温下生长氢化Ga掺杂ZnO薄膜(GZO/H),并通过湿法后腐蚀技术获得绒面结构.研究了室温下H2流量对薄膜结构、光电性能及表面形貌的影响.实验表明,氢化GZO(GZO/H)薄膜具有良好的(002)晶面择优取向生长,引入适当流量的H2可以有效提高薄膜的电学特性,GZO/H薄膜具有更低的电阻率以及较高的迁移率和载流子浓度.当通入H2流量为6 sccm时,薄膜电阻率为6.8 ×10-4 Ω·cm,Hall迁移率达34.2 cm2/Ⅴ·s,制备的GZO/H薄膜可见光区域平均透过率优于85;.此外,研究了H2流量对湿法腐蚀后绒面GZO/H薄膜表面形貌的影响,提出了一种薄膜绒面结构形成过程模型. 相似文献
6.
Bandgap engineering of semiconductor nanomaterials is critical for their applications in nanoelectronics, optoelectronics, and photonics. Here we report, for the first time, the growth of single-crystalline quaternary alloyed Ga_(0.75)In_(0.25)As_(0.49)Sb_(0.51) nanowires via a chemical-vapor-deposition method. The synthesized nanowires have a uniform composition distribution along the growth direction, with a zinc-blende structure. In the photoluminescence investigation,these quaternary alloyed semiconductor nanowires show a strong band edge light emission at 1950 nm(0.636 e V). Photodetectors based on these alloy nanowires show a strong light response in the near-infrared region(980 nm) with the external quantum efficiency of 2.0 × 10~4% and the responsivity of 158 A/W. These novel near-infrared photodetectors may find promising applications in integrated infrared photodetection, information communication, and processing. 相似文献
7.
实验采用脉冲磁控溅射法制备铝掺杂氧化锌(AZO)薄膜.为了进一步提高AZO薄膜的光电性能,在溅射过程中加入一定流量的氢气,以高纯ZnO ∶Al2O3陶瓷靶为溅射靶材,制备AZO/H透明导电薄膜.通过测试薄膜的结构特性、表面形貌及其光电性能,详细地研究了氢气流量对AZO薄膜性能的影响.溅射过程中引入氢气,可以促进薄膜的晶化,提高薄膜的迁移率和透过率(400—1100 nm).采用纯氩气溅射制备AZO薄膜的电阻率为5.664×10-4 Ω·cm
关键词:
氧化锌
氢气流量
磁控溅射
太阳电池 相似文献
8.
Influence of the total gas flow rate on high rate growth microcrystalline silicon films and solar cells 下载免费PDF全文
This paper reports that high-rate-deposition of microcrystalline silicon solar cells was performed by very-highfrequency plasma-enhanced chemical vapor deposition.These solar cells,whose intrinsic μc-Si:H layers were prepared by using a different total gas flow rate (F total),behave much differently in performance,although their intrinsic layers have similar crystalline volume fraction,opto-electronic properties and a deposition rate of ~ 1.0 nm/s.The influence of F total on the micro-structural properties was analyzed by Raman and Fourier transformed infrared measurements.The results showed that the vertical uniformity and the compact degree of μc-Si:H thin films were improved with increasing F total.The variation of the microstructure was regarded as the main reason for the difference of the J-V parameters.Combined with optical emission spectroscopy,we found that the gas temperature plays an important role in determining the microstructure of thin films.With F total of 300 sccm,a conversion efficiency of 8.11% has been obtained for the intrinsic layer deposited at 8.5 A/s (1 A=0.1 nm). 相似文献
9.
采用直流脉冲反应磁控溅射方法生长W掺杂ZnO(WZO)透明导电氧化物薄膜并研究了衬底温度对薄膜微观结构、组分、表面形貌以及光电性能的影响.实验结果表明,WZO薄膜具有良好的(002)晶面择优取向,且适当的衬底温度是制备优质WZO薄膜的关键因素.随着衬底温度升高,薄膜表面粗糙度先增大后减小;衬底温度较高时,薄膜的结构致密,结晶质量好,电子迁移率高.当衬底温度为325℃时,WZO薄膜获得最低电阻率9.25×10-3Ω·cm,方块电阻为56.24Ω/□,迁移率为11.8 cm2 V-1·s-1,其在可见光及近红外区域(400—1500 nm)范围的平均透过率达到85.7%. 相似文献
10.