Realization of an efficient coherent combination via Michelson cavity

An intracavity coherent coupling Michelson erbium-doped fibre （EDF） laser （MCEDFL） is proposed and demonstrated. By using this laser system, we find a means to obtain a maximum power output at the same pumping power level. From the experiment based on fibre Bragg gratings （FBGs） with different refiectivities from 6% to 100%, we find that the reflectivity of the FBG plays a vital role in improving the performance of the MCEDFL. At the same time, the MCEDFL with a polarizer can be coherently combined effectively. This type of system, in principle, is compatible with other more powerful pumping methods, such as cladding pumping, and brings some novel perspectives to the realization of high power lasers.     

Realization of an All-Fibre Self-Organization Intra-Cavity Coherent Erbium-Doped Fibre Laser

An intra-cavity coherent coupling Michelson Er-doped fibre （EDF） laser （MCEDFL） is proposed and demonstrated. Characteristics of the MCEDFL are investigated. It is found that the MCEDFL with a polarizer can be coherent combined effectively. By the experiment based on fibre Bragg gratings （FBGs） with different reflectivity, we find that the reflectivity of the FBG play a vital role in improving the performance of the MCEDFL. This outcome adequately shows many favourable features, such as high efficiency, easy operation, and simple all-fibre configuration.     

Enhancing Coherent Combining Efficiency via Choosing Appropriate Lasing Wavelength in a Michelson Compound Cavity Based on Two 3 dB Fibre Loop Mirrors and One Fibre Bragg Grating

Enhancing coherent combining efficiency via choosing appropriate lasing wavelength in a Michelson compound cavity based on two 3 dB fibre loop mirrors and one fibre Bragg grating （FBG） has been experimentally demonstrated. The FBG with 4.5% reflectivity is replaced at the cleaved facet with 4% Fresnel reflection. A high coherent combining efficiency of 93.5% is obtained when the FBG with central wavelength at 1559.845nm is introduced into the cavity, while it is only 90.1% combining efficiency with the FBG at central wavelength 1557.830 nm. In comparison with other reports, the proposed compound-cavity laser has the advantage of needless tuning FBG to obtain the coherent condition, and it is facile to ascertain the seemly wavelength lasing for a Michelson compound cavity.     

Ag基Bi-2223相复合带材中晶粒取向分布

基于Ag基Bi2223相(Bi2223/Ag)复合带材中晶面取向对提高临界电流密度等实际应用方面的重要性,我们在带材临界电流密度测量的基础上,由金兹玻-朗道(GL)理论计算出沿ab平面和c轴方向的上临界磁场Hc2(H∥ab)和Hc2(H∥c),其比值强烈依赖于晶粒ab平面与带材宽面的夹角θ,由此得到带材中晶粒平面的取向分布.我们发现,Bi2223/Ag带材中晶粒可在-75°<θ<75°范围内自由生长,但不可能有晶粒的ab面垂直于带材宽面的晶粒存在.研究结果表明:95%的晶粒取向为|θ|<75°范围,|θ|=75°～85°在的晶粒只有5%,而在|θ|>85°的区域没有晶粒分布.     

用于相干合成大模面积光纤放大器的实验研究

报道了一种用于激光束相干合成的大模面积掺镱双包层光纤放大器的实验研究,采用后向抽运的方式,放大器输出功率为1.61 W,放大后信号光的3 dB线宽为0.027 nm,并保持了输入信号光的优良光谱特性.从实验上深入研究了在该种放大器中,剩余抽运光功率、前向输出功率、后向输出功率等随抽运功率变化的规律.实验研究的目标是探索相干合成的方法,所设计的输出激光束线宽既保证了足够的相干长度,同时又能有效抑制受激布里渊散射.     

大功率多波长可转换双包层光纤激光器

在多模掺镱双包层光纤上,利用相位掩模法直接写制Bragg光栅作为激光器后腔镜,得到多波长激光输出.在室温下,通过调节偏振控制器可以得到稳定的单波长及多波长的激光输出,输出波长范围在1 056～1 061 nm,线宽均小于0.02 nm.在25 W的976 nm激光泵浦下,激光器得到功率为6 W的多波长输出.     

Realization of Stable Narrow Linewidth Dual-Wavelength Lasing in an Erbium-Doped Fibre Laser by Cleaving the Wavelength-Selective Filter Spectrum

We propose and demonstrate a new concept of stable narrow-line-width and close wavelength spacing dualwavelength lasing in an Er-doped fibre ring laser （EDFRL） by cleaving the spectrum with a wavelength-selective component in the EDFRL. A fibre loop mirror （FLM） combining with a polarization controller （PC） acts as the cleaver. The cleaver can produce a fine pectinate spectrum. By adjusting the PC, the fine pectinate spectrum can be so changeable that cleaving the spectrum of a fibre Bragg grating （FBG） into two parts. As a result, we obtain the dual-wavelength fibre lasering with a bandwidth of only 0.03nm and a wavelength spacing of only 0.07nm. Furthermore, the laser can also perform stable switchable single wavelength or stable different-bandwidth dual-wavelength by carefully adjusting the PC at room temperature.