排序方式: 共有46条查询结果,搜索用时 78 毫秒
1.
Neutron Diffraction of Large-Volume Samples at High Pressure Using Compact Opposed-Anvil Cells 下载免费PDF全文
Neutron diffraction techniques of large-volume samples at high pressure using compact opposed-anvil cells are developed at a reactor neutron source, China's Mianyang research reactor. We achieve a high-pressure condition of in situ neutron diffraction by means of a newly designed large-volume opposed-anvil cell. This pressure calibration is based on resistance measurements of bismuth and the neutron diffraction of iron. Pressure calibration experiments are performed at room temperature for a new cell using the tungsten carbide anvils with a tapered angle of 30°, Φ4.5 mm culet diameter and the metal-nonmetal composite gasket with a thickness of 2 mm. Transitions in Bi(Ⅰ–Ⅱ 2.55 GPa, Ⅱ–V 7.7 GPa) are observed at 100 and 300 kN, respectively, by resistance measurements.The pressure measurement results of neutron diffraction are consistent with resistance measurements of bismuth.As a result, pressures up to about 7.7 GPa can routinely and stably be achieved using this apparatus, with the sample volume of 9 mm~3. 相似文献
2.
3.
Neutron powder diffraction and high-pressure synchrotron x-ray diffraction study of tantalum nitrides 下载免费PDF全文
Tantalum nitride(TaN) compact with a Vickers hardness of 26 GPa is prepared by a high-pressure and hightemperature(HPHT) method. The crystal structure and atom occupations of WC-type TaN have been investigated by neutron powder diffraction, and the compressibility of WC-type TaN has been investigated by using in-situ high-pressure synchrotron x-ray diffraction. The third-order Birch–Murnaghan equation of state fitted to the x-ray diffraction pressure–volume(P–V) sets of data, collected up to 41 GPa, yields ambient pressure isothermal bulk moduli of B'_0= 369(2) GPa with pressure derivatives of B 0= 4 for the WC-type TaN. The bulk modulus of WC-type TaN is not in good agreement with the previous result(B_0= 351 GPa), which is close to the recent theoretical calculation result(B_0= 378 GPa). An analysis of the experiment results shows that crystal structure of WC-type TaN can be viewed as alternate stacking of Ta and N layers along the c direction, and the covalent Ta–N bonds between Ta and N layers along the c axis in the crystal structure play an important role in the incompressibility and hardness of WC-type TaN. 相似文献
4.
首次报道了一种新型的基于铰链式六面顶压机的二级6-8模大腔体静高压装置的内置加热元件的设计与温度标定。此加热组装结构简单,升温快,保温效果好,并有效地解决了国外基于两面顶压机构架下的二级6-8模内加热组装中热电偶在施加压力时易断的问题。以低成本的碳管为加热元件,采用直接和间接两种加热方式,用双铂铑(Pt6%Rh-Pt30%Rt)B型热电偶进行温度测量,并根据实验过程中加热功率与腔内实际温度的关系,对不同压力下腔体内的温度进行了标定。实验结果表明:此加热系统的油压达到40 MPa(腔体压力约10 GPa)时,温度可以达到1 700 ℃以上;在油压为30 MPa、样品室温度为1 000 ℃时,保温时间可达2 h,甚至更长;实验中获得样品的直径可达3 mm,高度可达7 mm,实现了在高温超高压条件下大样品的制备,满足了实验对产生高温超高压条件的需要。 相似文献
5.
6.
以氧化镁(MgO)和氧化钴(CoO)为初始材料,利用固相反应方法,经8h的混料、200MPa的预压以及在空气氛围下1 200℃的烧结等步骤,成功制备出钴的摩尔分数为9%的氧化镁传压介质(MgO+9%CoO)。采用X射线粉末衍射仪、扫描电子显微镜以及热重分析仪对样品进行表征,结果表明:在烧结过程中混合粉料之间发生了反应,金属离子相互交换,钴离子取代MgO晶格中的部分镁离子,从而形成MgO-CoO固溶体。与目前国产MgO传压介质(MgO+10%Na4SiO4(质量分数))相比,实验制备的钴掺杂MgO传压介质不含杂质,高温高压下更稳定,并且温度发生效率更高。 相似文献
7.
8.
9.
We observed an isostructural phase transition in the solid nitrogen λ-N2 at approximately 50 GPa accompanied by anomalies in lattice parameters, atomic volume and Raman vibron modes. The anomalies are ascribed to a slight reorientation of the nitrogen molecules, which does not seem to affect the monoclinic symmetry(space group p21/c). Our ab initio calculations further confirm the phenomena, and suggest an optimized structure for the λ-N2 phase. In addition, a ne... 相似文献
10.
将六面顶压机立方压腔内置入电路,采用原位电阻测量确定Bi,Tl,Ba相变的方法,标定了压腔内不同位置的压力(强).通过标定立方压腔顶锤表面的压力并结合计算,分别得到了外部加载与压腔密封边受力以及合成腔体受力的对应关系.实验分析结果表明,随着外部加载的增加,当腔体压力达到5 GPa时,消耗在压腔密封边上的加载急剧上升,消耗在合成腔体的加载趋于不变,从而导致立方压腔压力达到上限.利用实验结果,分析了立方压腔在高压下的受力状态,解释了立方压腔的压力难以超过7 GPa的原因.结合立方压腔的几何结构,通过理论分析,提出了采用高体弹模量的物质作为传压介质,同时采用低体弹模量的物质作为密封边提高立方压腔压力上限的可行方案.通过定量标定叶腊石压腔轴向的压力梯度,给出了压腔内沿对称轴不同位置压力值的计算方法,此方法可为高压实验提供更精确的压力数据. 相似文献