首页 | 本学科首页   官方微博 | 高级检索  
文章检索
  按 检索   检索词:      
出版年份:   被引次数:   他引次数: 提示:输入*表示无穷大
  收费全文   10篇
  免费   8篇
晶体学   11篇
物理学   7篇
  2018年   3篇
  2015年   1篇
  2014年   5篇
  2013年   1篇
  2012年   2篇
  2011年   4篇
  2010年   2篇
排序方式: 共有18条查询结果,搜索用时 16 毫秒
1.
通过传统固相烧结法制备了xSrTiO3-(1-x)Mg6Ti5O16微波介质陶瓷,并研究其晶体结构、显微结构及微波介电性能.xSrTiO3-(1-x)Mg6Ti5O16复合陶瓷主要含有MgTiO3、SrTiO3和Mg6Ti5O16三相;复合陶瓷晶粒分布紧密,尺寸大小不均匀;适当增加SrTiO3含量可以有效提高介电常数和品质因数,并使谐振频率温度系数趋于正值.1420 ℃烧结的3.8;SrTiO3-96.2;Mg6Ti5O16复合微波陶瓷可获得最佳微波介电性能:εr=17, Q×f =42729 GHz和τf=5 ppm/℃.  相似文献   
2.
采用固相反应法制备了TiO2掺杂的ZnO-Bi2O3-Co2O3-MnCO3系低压压敏陶瓷.采用X射线衍射、扫描电镜、压敏电阻直流参数仪、阻抗分析仪等研究了掺杂量对陶瓷的微结构、压敏性能和阻抗等影响.结果表明:掺杂1.0mol%TiO2时综合电性能最好,压敏电压梯度为21.6 V/ mm,漏电流密度为0.02 μA/ mm2,非线性系数为33;掺杂最大于1.0 mol%时,压敏电压梯度降低的同时也使非线性系数降低,漏电流密度增大;Cole-Cole形式的复阻抗谱图表明掺杂1.0 mol%TiO2的晶界电阻最大,晶界电阻对ZnO-Bi2O3-Co2O3-MnCO3-TiO2系低压压敏陶瓷电阻的贡献最为明显.  相似文献   
3.
采用丝网印刷工艺制备了BaCoII0.02CoIII0.04Bi0.94O3/BaSb0.04Sn0.96O3复合热敏厚膜。借助X射线衍射仪、扫描电子显微镜和阻温测试仪对复合热敏厚膜的微结构、电学性能进行了表征分析。结果表明复合热敏厚膜主相仍为钙钛矿结构的BaCoII0.02CoIII0.04Bi0.94O3和BaSb0.04Sn0.96O3,厚膜表面随BaCoII0.02CoIII0.04Bi0.94O3含量增加趋于致密均匀。复合热敏厚膜的烧结温度、室温电阻率(ρ25)、热敏常数(β25/85)和活化能(E a)随BaCoII0.02CoIII0.04Bi0.94O3含量的增加呈现下降趋势,其烧结温度、ρ25、β25/85和E a分别处于870~1000℃、2.5 kΩ·cm~2.35 MΩ·cm、2764~4030 K和0.238~0.348 eV范围内。  相似文献   
4.
采用传统固相法制备了MnO2掺杂Ca0.16Sr0.04Li0.4Nd0.4TiO3微波介质陶瓷,并借助X射线衍射仪、扫描电子显微镜、网络矢量分析仪和精密阻抗分析仪对微波陶瓷的物相结构、表面形貌、介电性能和电学微结构进行了分析。结果表明掺杂MnO2部分进入Ca0.16Sr0.04Li0.4Nd0.4TiO3陶瓷晶格Ti4+位中并导致衍射主峰衍射角向高角度轻微偏移,所得陶瓷晶粒大小约5μm。随着MnO2含量的增加,观察到显著的Mn-Li氧化物杂相,过高的MnO2掺杂使得Ca0.16Sr0.04Li0.4Nd0.4TiO3陶瓷晶粒的主要生长方向由(200)变为(220)。MnO2含量的增加使得陶瓷介电常数εr从140降至122,品质因子Qf从1450显著升至1960 GHz,谐振温度系数τf较为稳定且均为40 ppm/℃左右。陶瓷内部由Li+陶瓷表面电学阻抗、晶界阻抗、晶壳和晶核形成的晶粒阻抗构成,其中晶界的电阻贡献主要来自于Li+挥发或析出形成的阳离子空位电导;晶壳和晶核电阻为电子-空穴与氧空位相互耦合形成的电导。微波陶瓷的介质损耗主要来自于晶粒区域晶核的高度半导化各构成电学微结构部件载流子束缚能力大小与活化能规律趋于一致。  相似文献   
5.
采用固相烧结法制备了掺杂Al2O3的Ca0.2Sr0.05Li0.375Sm0.375Ti O3微波介质陶瓷。研究了Al2O3掺杂对Ca0.2Sr0.05Li0.375Sm0.375Ti O3的助烧效果、物相结构、显微组织和微波介电性能的影响规律。结果表明:Al2O3的添加降低了Ca0.2Sr0.05Li0.375Sm0.375Ti O3陶瓷的烧成温度,但对物相基本无影响。此外,高含量Al2O3的添加能促进晶粒细化。此体系陶瓷的最佳介电性能为:Al2O3含量为0.9wt%且烧成温度为1250℃时,εr=110.8、Q·f=4159.6 GHzτf=49.4 ppm/℃。  相似文献   
6.
采用固相反应法在1300℃烧结4 h得到了致密的具有钙钛矿结构的Ca0.16Sr0.04Li0.4Nd0.4TiO3微波介质陶瓷。通过X射线衍射仪、扫瞄电子显微镜和矢量网络分析仪系统的研究了不同含量Al2O3掺杂对Ca0.16Sr0.04Li0.4Nd0.4TiO3(CSLNT)陶瓷的烧结行为、晶体结构、显微形貌以及微波介电性能的影响。结果表明,对于CSLNT+xwt%Al2O3陶瓷,随着Al2O3掺杂量的增加,介电常数(εr)有轻微的降低,而温度系数(τf)有所增加;由于第二相的出现导致了品质因子(Q·f)先增后减。当Al2O3掺杂量为2wt%时,其介电性能最佳的致密化烧结温度为1200℃,此时具有最佳的微波介电性能:εr=112.6,Q·f=1698 GHz和τf=31.9 ppm/℃。  相似文献   
7.
BaBiO 3-doped BaTiO3(BB-BT) ceramic,as a candidate for lead-free positive temperature coefficient of resistivity (PTCR) materials with a higher Curie temperature,has been synthesized in air by a conventional sintering technique. The temperature dependence of resistivity shows that the phase transition of the PTC thermistor ceramic occurs at the Curie temperature,Tc=155℃,which is higher than that of BaTiO3(≤130℃). Analysis of ac impedance data using complex impedance spectroscopy gives the alternate current (AC) resistance of the PTCR ceramic. By additional use of the complex electric modulus formalism to analyse the same data,the inhomogeneous nature of the ceramic may be unveiled. The impedance spectra reveal that the grain resistance of the BB-BT sample is slightly influenced by the increase of temperature,indicating that the increase in overall resistivity is entirely due to a grain-boundary effect. Based on the dependence of the extent to which the peaks of the imaginary part of electric modulus and impedance are matched on frequency,the conduction mechanism is also discussed for a BB-BT ceramic system.  相似文献   
8.
袁昌来  刘心宇  周昌荣  许积文  杨云 《中国物理 B》2011,20(4):48701-048701
BaBiO3-doped BaTiO3 (BB-BT) ceramic, as a candidate for lead-free positive temperature coefficient of resistivity (PTCR) materials with a higher Curie temperature, has been synthesized in air by a conventional sintering technique. The temperature dependence of resistivity shows that the phase transition of the PTC thermistor ceramic occurs at the Curie temperature, Tc=155 ℃, which is higher than that of BaTiO3 ( ≤ 130 ℃). Analysis of ac impedance data using complex impedance spectroscopy gives the alternate current (AC) resistance of the PTCR ceramic. By additional use of the complex electric modulus formalism to analyse the same data, the inhomogeneous nature of the ceramic may be unveiled. The impedance spectra reveal that the grain resistance of the BB-BT sample is slightly influenced by the increase of temperature, indicating that the increase in overall resistivity is entirely due to a grain-boundary effect. Based on the dependence of the extent to which the peaks of the imaginary part of electric modulus and impedance are matched on frequency, the conduction mechanism is also discussed for a BB-BT ceramic system.  相似文献   
9.
袁昌来  刘心宇  杨云  许积文  谷岩 《物理学报》2010,59(10):7396-7403
以BaBiO3为导电相,BaFe0.4Sn0.6O3为高阻相,采用固态反应法制备了不同BaBiO3含量的BaFe0.4Sn0.6O3/BaBiO3负温度系数(NTC)热敏复合陶瓷.为获得在渗流阈值(即BaBiO3含量为12 mol%)前后复合陶瓷的内部导电机理,对复合陶瓷进行了阻抗分析.分  相似文献   
10.
采用传统的固相法制备了(1-x)(K0.5Na0.5NbO3-LiSbO3-BiFeO3)-xCuFe2O4 (x=0.1, 0.2, 0.3, 0.4) 磁电复合陶瓷, 并借助X射线衍射仪、扫描电镜和磁电耦合系数测试仪等对复合陶瓷的微结构和性能进行了分析. 结果表明, 复合陶瓷的K0.5Na0.5NbO3-LiSbO3-BiFeO3和CuFe2O4物相之间发生了一定的离子相互扩散作用, 且两相的颗粒大小匹配性较好. 随着CuFe2O4含量增加, 复合陶瓷的压电系数从130 pC/N减小到30 pC/N, 饱和磁致伸缩系数从4.5×10-6增加到12.4×10-6左右, 磁电耦合系数表现出先增加后减小, 在x=0.3时获得最大的磁电耦合系数9.4 mV·cm-1·Oe-1. 关键词: 0.5Na0.5NbO3-LiSbO3-BiFeO3')" href="#">K0.5Na0.5NbO3-LiSbO3-BiFeO3 2O4')" href="#">CuFe2O4 磁电耦合  相似文献   
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号