用加权残值法求压杆的临界载荷

用加权残值法求压杆的临界载荷刘悦藏（河北工学院材料力学教研室，天津３００１３２）加权残值法是一种求解微分方程的方法。它不是严格地求微分方程的解析解，而是直接从微分方程得出问题的近似解。与其它数值法相比，它没有完全抛弃已有的理论解。由于此法原理简单、方...     

零气耗空气除湿实验研究

针对有热再生式压缩空气除湿装置在再生及冷吹过程中产生气耗的缺点,运用喷射器及恒压变温吸附再生原理设计了一种零气耗空气除湿工艺流程。在搭建小型实验台的基础上,通过改变喷射器引射率进行实验研究三种工况条件下活性氧化铝的吸附再生性能。实验结果表明:实验全过程能够保持一个相对稳定且有效的恒压变温吸附再生条件,且出口空气露点达到生产要求;随着喷射率的降低,吸附剂再生效果逐渐下降,而吸附效果逐渐上升。引射率为0.5时的再生时间约为引射率0.75的1.85倍,再生速率约为0.51倍。而引射率0.33,引射率0.5的吸附效率分别为引射率0.75的1.04倍,1.11倍,吸附稳定时间1.11倍,2.22倍。     

一种高稳定性光纤F-P标准具的设计

法布里-珀罗(F-P)标准具广泛应用于光纤通信与光纤传感领域。实心标准具受自身材料的限制,无法满足高稳定性的要求。空气隙标准具采用热膨胀系数极低的垫片,提高了器件的温度稳定性能。介绍了低温漂光纤F-P标准具的设计和制作,出射光自由光谱范围为100GHz,损耗为3dB,0~70℃温度漂移小于3GHz。相比于采用传统方法制作的标准具,该光纤F-P标准具稳定性更高,解决了实心标准具折射率和热膨胀变化大的问题。     

半绝缘GaAs的欧姆接触电极材料Ag/Co掺杂的非晶碳膜制备与检测

稳定的欧姆接触对半导体器件的正常工作起到至关重要的作用.目前市场上主要采用金/金锗镍合金作为n型GaAs的电极材料,工艺复杂,成本高昂.本文研究了一种新型的、廉价的适用于半绝缘GaAs的欧姆接触电极材料Ag/Co掺杂的非晶碳膜及其制备过程,以便于读者对半导体器件的制备工艺和流程有所了解.     

企业转型导向的政策资源评价研究——基于中小企业板块的实证分析

政策资源的运用是企业转型过程中不可或缺的方面,评价政策资源对企业转型的影响至关重要.鉴于此,以我国中小企业板块61家已转型上市企业为研究对象,收集其转型前后各3年数据,考察政策资源对企业转型的影响.通过构建多元线性回归分析模型和实证研究发现,政府补助和税收优惠对企业转型起积极作用,而信贷优惠对企业转型的作用并不明显.最后从政府的视角就制定、监管、创新政策,以及从企业视角就使用政策和利用政策资源不足等方面提出建议.     

Highly efficient single longitudinal mode-pulsed green laser

A novel design for a highly efficient 1-kHz single-frequency green laser is proposed.An efficient singlefrequency laser pulse output at 532-nm wavelength may be obtained by combining the injection seeding with intracavity frequency doubling in a compact U-shaped cavity formed by two plano dichroic mirrors in an end-pumping arrangement.The laser is capable of producing green pulses with a total energy of 6.3 mJ at a pulse repetition rate of 1 kHz.The pulse width is about 10 ns and the optical-optical efficiency from the 808-nm pump source to the 532-nm green output is around 12.7%.     

High throughput N-modular redundancy for error correction design of memristive stateful logic

Memristive stateful logic is one of the most promising candidates to implement an in-memory computing system that computes within the storage unit. It can eliminate the costs for the data movement in the traditional von Neumann system. However, the instability in the memristors is inevitable due to the limitation of the current fabrication technology, which incurs a great challenge for the reliability of the memristive stateful logic. In this paper, the implication of device instability on the reliability of the logic event is simulated. The mathematical relationship between logic reliability and redundancy has been deduced. By combining the mathematical relationship with the vector-matrix multiplication in a memristive crossbar array, the logic error correction scheme with high throughput has been proposed. Moreover, a universal design paradigm has been put forward for complex logic. And the circuit schematic and the flow of the scheme have been raised. Finally, a 1-bit full adder (FA) based on the NOR logic and NOT logic is simulated and the mathematical evaluation is performed. It demonstrates the scheme can improve the reliability of the logic significantly. And compared with other four error corrections, the scheme which can be suitable for all kinds of R-R logics and V-R logics has the best universality and throughput. Compared with the other two approaches which also need additional complementary metal-oxide semiconductor (CMOS) circuits, it needs fewer transistors and cycles for the error correction.     

Mechanically tunable broadband terahertz modulator based on high-aligned Ni nanowire arrays

We present a mechanically tunable broadband terahertz(THz) modulator based on the high-aligned Ni nanowire(NW)arrays. The modulator is a sandwich structure consisting of two polydimethylsiloxane layers and a central layer of highaligned Ni NW arrays. Our experimental measurements reveal the transmittance of THz wave can be effectively modulated by mechanical stretching. The NW density in arrays increases with the strain increasing, which induced an enhancement in the absorption of THz wave. When the strain increases from 0 to 6.5%, a linear relationship is observed for the variation of modulation depth(MD) of THz wave regarding the strain, and the modulated range is from 0 to 85% in a frequency range from 0.3 THz to 1.8 THz. Moreover, the detectable MD is about 15% regarding the 1% strain change resolution. This flexible Ni NW-based modulator can be promised many applications, such as remote strain sensing, and wearable devices.     

CEE实验中TOF探测器数据获取系统的设计

正在研制的低温高密度核物质测量谱仪(CSR External-target Experiment,CEE)系统经过触发后平均数据率可达2 GB/s。针对整个谱仪的设计需求,本文提出了通用的流处理数据获取架构Data-Matrix (D-Matrix),并设计了D-Matrix在飞行时间探测器(Time-of-Flight,TOF)子系统应用的具体方案。TOF系统的数据获取(Data Acquisition,DAQ)系统中使用光纤、PCIe总线等高速串行通信方式完成从前端电子学(Front End Electronic, FEE)到服务器阵列的数据传输,并通过具有统一接口的流处理节点的部署和级联来完成事例组装、命令路由、状态实时监测和数据显示与存储等任务。除此之外,TOF系统的数据获取系统在硬件和逻辑设计上具有良好的通用性,可以兼容其他子探测器系统,并应用于CEE实验的全局系统中。     

飞秒激光作用下质子产额及空间分布

在超短超强激光装置SILEX-Ⅰ上,利用HD810辐射变色膜在靶背法线方向测量了质子产额及空间分布。测量结果显示:光学密度与质子流量密切相关,光学密度越大,质子流量就越大;当C8H8厚度相同,Cu厚度增加时,质子产额随辐射变色膜的光学密度平均值减小而减小;当靶相同,激光功率密度越小时,光学密度平均值就越小,则质子产额也越小;实验中还得到了质子呈环状、成丝和圆盘状结构的空间分布,该空间分布的大小与激光焦斑大小无关。