227-W output all-fiberized Tm-doped fiber laser at 1908 nm

In this paper, we report that a diode-pumped thulium-doped double clad silica fiber laser can provide powers of up to 227 W at 1908 nm, corresponding to a slope efficiency of 54.3%, and an optical-to-optical efficiency of 51.2%. The output power, to the best of our knowledge, is the highest output at 1908 nm. The beam quality M2 factor is about 1.56. Also discussed in this paper is the dependence of the laser performance on fiber length.     

All-fiber linearly polarized laser oscillator by fiber coiling loss control

In this paper,we demonstrate an all-fiber linearly polarized fiber laser oscillator.The single polarization of the oscillator is achieved through the careful designing of the active fiber coiling.The relationship between fiber coiling diameter and polarization extinction ratio and optical efficiency is studied,whose results lead to an optimized system.The thermal management of the oscillator is also refined,which allows the oscillator to reach a maximum output power of44.1 W with an optical-to-optical efficiency of 57.9%.A high average polarization extinction ratio of 21.6 d B is achieved during a 2-hour stability test.The oscillator also owns a narrow 3-d B bandwidth of 0.1 nm,as well as near-diffraction-limit beam quality of M~2~ 1.14.     

Optical properties of ytterbium-doped tandem-pumped fiber oscillator

With the rapid development of ytterbium-doped fiber lasers, some obtrusive limitations on power scaling appeared. In order to avoid these problems, a scheme called tandem pumping is introduced into the fiber laser field. In this paper, the optical properties of an ytterbium-doped tandem-pumped fiber oscillator are presented. According to the oscillator profile, the proper gain fiber type and pump wavelength range are picked out, under the comprehensive consideration of laser conversion efficiency and beam quality. In addition, the photodarkening performances of tandem pumping lasers and conventional ones are compared based on practical application, with all possible impact parameters taken into account. Moreover, an all-fibered tandem-pumped oscillator centered at 1079.5 nm is built, in the way of clad pumping by a 1030-nm fiber laser. The laser power of the oscillator reaches 7 W, with an opto-optic efficiency of 82.4%.     

Influence of mode competition on beam quality of fiber amplifier

Theoretical and experimental studies of the influence of the mode competition on the output beam quality of fiber amplifiers are presented. Rate equations and modal decomposition method are used in the theoretical model. In the experiment, the output beam-quality factor of a fiber amplifier, which is based on a Yb-doped double-clad large mode area fiber as a function of the seed beam quality and the pump power of the amplifier, is measured. The experimental results are consistent with the theoretical analysis.     

High conversion efficiency,high power density Q-switched fiber laser

An acoustic-optic Q-switched all-fiber laser With a high-repetition-rate, a short pulse width, a wide spectrum, and a high conversion efficiency is experimentally demonstrated. In the laser configuration, a （1＋1）x 1 side-pumping coupler is introduced to perform backward pumping, and a 10/130%tm Yb fiber is adopted. The acoustic-optic component operates in the first direction, achieving a Q-switched pulse with a repetition rate adjustable in the range of 20 kHz-80 kHz. Under a repetition rate of 20 kHz and a pump power of 6.76 W, the fiber laser obtains a highly efficient and stable pulse output, with an average power of 4.3 W, a pulse width of 56 ns, a peak power of 3.83 kW, and a power density of 1.39x 101~ W/cm2. Particularly, the optic-optic conversion efficiency of the laser reaches as high as 64%. Another feature of the pulsed laser is that the high reflection mirror reflects the pump light as well, which brings the secondary absorption of the pump power into the gain fiber.     

Internal Features of Fiber Fuse in a Yb-Doped Double-Clad Fiber at 3 kW

We study internal features of fiber fuse in a Yb-doped double-clad fiber. The samples of fiber fuse are acquired at the power level of 3 kW in an all-fiber forward-pumped master oscillator power amplifier configuration fiber laser that is built specially for fiber fuse analyses. At this high power level, drastic refractive-index redistribution arises in an expended high refractive index area around the bullet-shaped voids of fiber fuse. Electron spin resonance analyses on post-fiber-fuse samples of the Yb-doped double-clad fiber indicate rising Frenkel defect concentration, meanwhile showing a new resonance center that is different from the ones of the Ge-doped fibers studied previously. This new resonance center probably suggests the generation of Al-oxygen hole center, a kind of defect formed during the catastrophic fuse process.     

国产光纤实现同带抽运3000W激光输出

同带抽运是目前实现高功率光纤激光器的有效手段.本文基于同带抽运方式,以国产25/250μm掺镱双包层光纤为增益光纤,构建了全光纤化的主控振荡器功率放大器.实验中采用的国产光纤是中国电子科技集团公司第四十六研究所采用化学气相沉积结合气相-液相复合掺杂工艺制备的,其Yb~(3+)离子的分布更均匀,吸收截面更大,吸收系数更高.实验中,在种子光功率为67.8 W、抽运总功率为3511 W的条件下,实现了3079 W的激光输出,斜效率为85.9%,光束质量M~2约为2.14,3dB带宽为1.4nm,这是目前基于国产光纤同带抽运方式实现的最高功率.理论和实验结果表明国产光纤制备技术不断成熟,已经具备承受高功率输出的能力.继续提高抽运功率,优化增益光纤长度,改良散热方式,国产光纤有望实现更高功率的激光输出.     

Optical properties of ytterbium-doped tandem-pumped fiber oscillatorOptical properties of ytterbium-doped tandem-pumped fiber oscillatorOptical properties of ytterbium-doped tandem-pumped fiber oscillator

With the rapid development of ytterbium-doped fiber lasers, some obtrusive limitations on power scaling appeared. In order to avoid these problems, a scheme called tandem pumping is introduced into the fiber laser field. In this paper, the optical properties of an ytterbium-doped tandem-pumped fiber oscillator are presented. According to the oscillator profile, the proper gain fiber type and pump wavelength range are picked out, under the comprehensive consideration of laser conversion efficiency and beam quality. In addition, the photodarkening performances of tandem pumping lasers and conventional ones are compared based on practical application, with all possible impact parameters taken into account. Moreover, an all-fibered tandem-pumped oscillator centered at 1079.5 nm is built, in the way of clad pumping by a 1030-rim fiber laser. The laser power of the oscillator reaches 7 W, with an opto-optic efficiency of 82.4%.     

Theoretical study of power amplification in tapered fiber with multi-seed parallel injection

We proposed the concept of parallel injection power amplification.A tapered fiber amplifier with multi-seed sources by the way of parallel injection was studied.The lower-order modes are excited and more than 90%of the input signal power remains in the fiber core if optimal injection and taper design are set.The power in the doped-core is amplified with high optical-optical efficiency.When light is propagating along the fiber,the higher-order modes are filtered which results in the high output beam quality.Incoherent combination of multi-seed lights launched through the wide end gives rise to the output power of several kW.     

国产光纤实现直接抽运全光纤化3000 W级激光输出

基于国产光纤构建了直接抽运全光纤化主控振荡器功率放大器结构光纤激光器, 放大级分别采用武汉烽火锐光科技有限公司和中国电子科技集团公司第四十六研究所提供的国产20/400 μm掺镱双包层光纤作为增益光纤, 通过全国产化放大级实现了3050和3092 W的1080 nm激光输出. 放大级提取效率分别为67.3%和68.2%, 光-光效率分别为63.0%和63.9%. 据可查询资料, 这是公开报道的直接抽运全光纤激光输出的最高水平, 同时由于采用了国产光纤作为放大级增益光纤, 表明国产光纤具备了3 kW级光纤激光器输出能力. 通过国产光纤横截端面以及光纤熔接显微镜图像实验分析知, 光纤制造工艺的不足是导致国产光纤激光器效率低的主要原因. 继续改进光纤工艺, 提升抽运功率, 优化光纤长度, 有望实现更高功率的全国产化光纤激光器输出.