排序方式: 共有67条查询结果,搜索用时 15 毫秒
1.
X射线鬼成像是一种低剂量、非定域成像方法,对医疗诊断和生物成像具有重要意义.在基于晶体劳厄衍射分光的X射线鬼成像中,晶体振动会造成衍射光路上散斑的模糊,进而导致利用关联方法重构图像衬度和空间分辨的降低.本文系统分析了衍射光路上散斑图像的模糊程度对归一化二阶关联函数g(2)的最大值和半高全。宽的影响.模糊程度的增强会导致g(2)最大值的减小和半高全宽的展宽,在理论上证明了模糊程度会引起重构图像的衬度和分辨能力的降低.为解决上述问题,本文在衍射光路和直通光路的直接关联方法(CLH)的基础上提出CLHE方法(CLH enhanced method).模拟实验表明CLHE算法能同时改善图像衬度和提高重构分辨率,并且模糊程度增强时,GLHE算法重构图像的峰值信噪比与先对直通光路的散斑图像进行高斯滤波处理再进行双光路关联计算方法(GLL)的差距扩大,同时保证其对噪声的鲁棒性.本文为晶体衍射分光的X射线鬼成像的实际应用提供可行的思路. 相似文献
2.
X射线三维成像技术是目前国内外X射线成像研究领域的一个研究热点.但针对一些特殊成像目标,传统X射线计算层析(CT)成像模式易出现投影信息缺失等问题,影响CT重建的图像质量,使得CT成像的应用受到一定的限制.本文主要研究了基于光场成像理论的X射线三维立体成像技术.首先从同步辐射光源模型出发,对X射线光场成像进行建模;然后,基于光场成像数字重聚焦理论,对成像目标场在深度方向上进行切片重建.结果表明:该方法可以实现对成像目标任一视角下任一深度的内部切片重建,但是由于光学聚焦过程中的离焦现象,会引入较为严重的背景噪声.当对其原始数据进行滤波后,再进行X射线光场重聚焦,可以有效消除重建伪影,提高图像的重建质量.本研究既有算法理论意义,又可应用于工业、医疗等较复杂目标的快速检测,具有较大的应用价值. 相似文献
3.
We report a design for one nanometer X-ray focusing by a complex refractive lens, which is capable of focusing 20 keV X-rays down to a lateral size of 0.92 nm (full-width at half-maximum (FWHM)) and an axial size of 98 nm (FWHM) with intensity gain of 49050. This complex refractive lens is comprised of a series of kinoform lenses, whose aperture is gradually matched to the converging trace of the X-ray beam so as to increase the numerical aperture (NA). The theoretical principle of the proposed complex refractive lens is presented. The NAs of these lenses are calculated. The numerical simulation results demonstrate that the proposed design can focus the X-ray beam into sub-nanometer while remaining high gain. 相似文献
4.
有机复合样品如大多数由低原子序数物质构成的多聚物组合材料、生物软组织等具有混合相位和振幅特性,采用传统吸收计算机层析(CT)或纯相位重构算法难以达到较高密度分辨的目的。采用基于吸收修正的Bronnikov相位恢复算法的X射线同轴相衬CT技术对高分子混合组份材料和药物医学样品进行了实验研究。结果表明该相位恢复算法可以实现多聚物组合材料的无损分辨和精确测量,能够清晰辨别各组份材料的电子密度分布;验证了药物样品多孔性结构三维测量的可行性,能够有效提供孔隙测量的阈值选择。该方法在材料科学尤其是聚合物组合材料、泡沫多孔材料都会发挥很好的作用;单距的低辐射优势,尤其适用于生物医学样品三维无损成像。 相似文献
5.
6.
7.
本文采用相移吸收二元性(PAD)相位恢复算法来实现混合 衬度样品内部不同密度组分的定量成像, 采用数字模拟和实验研究验证该方法的可行性. 模拟结果表明, 对于三种不同材料其重构误差均小于1%, 且误差值随材料折射率的增大而减小. 利用上海光源X射线成像线站开展了实验研究, 结果表明用单距PAD相位恢复算法可获取样品的定量信息. 与模拟结果相比, 实验中的重构精度相对较低, 环状伪影可能是影响精度的主要原因. 模拟和实验研究过程中, 均只采用了一组单距投影数据. 可以认为, 相移吸收二元性算法可用于混合衬度样品的定量信息分析研究. 由于剂量相对较低, 应可适合于软组织和骨骼同时存在时生物医学样品的定量相衬CT研究. 相似文献
8.
Due to the low absorption contrast of plant tissues, traditional x-ray radiography has not been included in the microscopic techniques used in the identification of traditional Chinese medicines (TCMs). With the development of x-ray phase contrast imaging (XPCI) in recent years, weakly absorbing materials could also be imaged by x- rays. Here we investigate microstructures of TCMs utilizing XPCI based on a nano-focus x-ray tube. The results demonstrated that XPCI is capable of revealing the microstructures of TCMs used as judging criteria in the identification of TCMs. The major advantages of the new method are nondestructivity, no special demand for sample preparation and suitability for thick samples. 相似文献
9.
10.
A Method for Quantitative Analysis of Chemical Mixtures with THz Time Domain Spectroscopy 总被引:1,自引:0,他引:1 下载免费PDF全文
A method for analysing chemical mixtures quantitatively with terahertz time domain spectroscopy is proposed. The experimental results demonstrate the feasibility of this technique. Transmission coefficient of THz wave at the sample surface is taken into account to improve the analytic precision, lsomer mixtures are chosen as the experimental samples. Compared to similar techniques, the analytic precision could be improved evidently in this method. 相似文献