排序方式: 共有14条查询结果,搜索用时 21 毫秒
1.
溶剂对光致变色材料-乙基红的光学特性影响 总被引:2,自引:0,他引:2
研究了溶剂性质对光致变色材料乙基红光学性质的影响.用吸收谱测定了乙基红染料在不同溶剂中的溶剂化位移.对相同浓度多种乙基红溶液进行了Z-scan测量,测量了不同乙基红溶液的光限幅效应,并讨论了其与溶剂之间的关系.随极性增加,吸收谱蓝移,可以通过选择不同溶剂,改变非线性材料的应用窗口.实验结果表明,在连续光照射下,乙基红溶液的非线性折射主要由热效应引起,非线性折射系数n2受溶剂的热学性质影响较大.此外,Z-scan结果中的非线性吸收为饱和吸收.至于光限幅效应,主要受热效应影响,但亦可由吸收谱预测出在某波长处的动态范围.得出的结论有助于偶氮染料作为非线性材料的应用. 相似文献
2.
将偶氮化合物乙基橙样品置于一对正交的偏振片之间,用一束激发光照射该样品,分别测量 在激发光的不同强度和不同偏振方向下探测光的透射功率,研究样品的双折射特性.实验表 明,透射光的饱和值和稳定值与激发光强成正比,且与激发光偏振方向有关,探测光与激发 光振动方向的夹角(θ)为45°时,其值最大;若θ不太小(>10°),sin22θ 与透射光的饱和值、稳定值成线性关系.同时,利用巴俾涅补偿器对样品的双折射率差进 行了测量,分别得到了绿光激发前后的准确数值为1.11×10-3和3.57×10 -3.
关键词:
偶氮
双折射
测量 相似文献
3.
We report measurements of absorption and anisotropy coefficients of the fat emulsion Intralipid-10%. An addingabsorber method is used for measurement of absorption and anisotropy coefficients of the Intralipid-10%. Using the diffusion theory which has been extended to include anisotropy scat geometry, we found that the standard deviations of multiple measurements for√μα/D are less than 0.6% and the residuals between the measured data and the fits have rms values of 0.1%, where μα is the absorbing coefficient of the solution in our experiment and D is the diffusion coefficient of the medium. The values of the standard deviations and the residuals demonstrate the high precision of the measurements. 相似文献
4.
5.
用CCD测量生物组织的漫反射率和透射率 总被引:5,自引:0,他引:5
介绍CCD实验装置和用C语言开发的CCD图像分析系统 ,测量和分析了新鲜猪脂肪和猪肌肉空间分辨的漫反射率和透射率 ,将测量结果与MonteCarlo模拟结果以及基于漫射理论的两个模型的结果相比较 ,结果表明在距离光束中心 12mm的范围内理论结果与实验结果符合得较好。结论是用CCD测量装置以及作者所开发的图像分析系统可以用于测定生物组织的漫反射率和透射率 ,这项测量为生物组织光学参数的无损和快速测量提供了实验依据。 相似文献
6.
两层生物组织光学特性参数无损测量的模拟研究 总被引:4,自引:0,他引:4
生物组织的光学特性参数是与疾病的无损光诊断有关的重要的光学参数,一般的测量所应用的模型是假设生物组织为半无限厚的均匀结构。为了更能反映生物组织的真实特性,本文应用两层结构模型,即假设第一层为有限厚的均匀组织,第二层为半无限厚,由漫射方程经过傅立叶变换得到传输方程的漫射解。为检验漫射解的准确性,将漫射解的表面漫射光分布与Monte Carlo模拟结果进行了比较,结果表明两者符合得很好。为了研究由漫射解是否可以获得两层组织的光学特性参数,将漫射解与Monte Carlo模拟数据进行了非线性拟合,反演获得组织的光学特性参数,结果表明,由漫射解可以获得两层组织的有效散射系数和吸收系数。 相似文献
7.
8.
9.
Using a special property of dynamic complementary-suppression-modulated transmission (DCSMT) in the bacteriorhodopsin (bR) film, we have demonstrated an all-optical time-delay relay. To extend our work, the relationship between the delay time of the all-optical time-delay relay and parameters of a bR film is numerically studied. We show how the delay time changes with the product of concentration and thickness (PCT) of a bR film. Furthermore, the shortest and longest delay times are given for the relay of 'switch off. The saturable delay time and maximum delaytime of 'switch on' are also given. How the wavelengths (632.8, 568, 533 and 412 nm) and intensities of the illuminating light influence the delay time is also discussed. The simulation results are useful for optimizing the design of all-optical time-delay relays. 相似文献
10.