Wide-Band Polarization-Insensitive High-Output-Power Semiconductor Optical Amplifier Based on Thin Tensile-Strained Bulk InGaAs

A polarization-insensitive semiconductor optical amplifier (SOA) with a very thin active tensile-strained InGaAs bu/k has been fabricated.The polarization sensitivity of the amplifier gain is less than 1 dB over both the entire range of driving current and the 3dB optical bandwidth of more than 8Onto.For optical signals of 1550nm wavelength,the SOA exhibits a high saturation output power 7.6dBm together with a low noise figure of 7.SdB, fibre-to-fibre gain of 11.5dB,and low polarization sensitivity of 0.5dB.Additionally,at the gain peak 1520nm,the fibre-to-fibre gain is measured to be 14.1 dB.     

Graded tensile-strained bulk InGaAs/InP superluminescent diode with very wide emission spectrum

A kind of novel broad-band superluminescent diodes (SLDs) using graded tensile-strained bulk InGaAs is developed. The graded tensile-strained bulk InGaAs is obtained by changing only group-Ⅲ trimethylgallium source flow during low-pressure metal organic vapor-phase epitaxy. At the injection current of 200mA, the fabricated SLDs with such structure demonstrate full-width at half-maximum spectral width of 106 nm and the output light power of 13.6 mW, respectively.     

长波长大应变InGaAs/InGaAsP分布反馈激光器的材料生长与器件制备

采用低压金属有机化合物气相沉积法(LP-MOCVD)生长并制作了1.6—1.7μm大应变InGaAs/InGaAsP分布反馈激光器.采用应变缓冲层技术，得到质量良好的大应变InGaAs/InP体材料.器件采用了4个大应变的量子阱，加入了载流子阻挡层改善器件的温度特性.1.66μm和1.74μm未镀膜的3μm脊型波导器件阈值电流低(小于15mA)，输出功率高(100mA时大于14mW).从10—40℃，1.74μm激光器的特征温度T₀=57K，和1.55μm InGaAsP分布反馈激光器的特征温度相当. 关键词： MOCVD InGaAs/InGaAsP 应变量子阱 分布反馈激光器     

基于电子舌技术对不同年份的化橘红的识别

不同年份的化橘红功效和价格均存在差异,为了快速识别未知橘红样品的年份,采用电子舌对2001～2010年的10个样品和一个盲样进行了分析.对原始数据采用主成分分析和判别因子分析.结果表明:主成分分析可以将不同年份的样品进行有效的区分,判别因子分析可以更好地区分不同年份的样品,并能进行盲样识别.在模式识别中,判别因子分析法的识别结果均优于主成分分析法,前者2个判别因子的累计方差贡献量达到了99.929%.电子舌可以较好地区分不同年份的化橘红,改进后有望应用于化橘红的快速检测.     

Dual-Wavelength Distributed Feedback Laser for CWDM Based on Non-Identical Quantum Well

Using non-identical quantum wells as the active material, a new distributed-feedback laser is fabricated with period varied Bragg grating. The full width at half maximum of I 15 nm is observed in the amplified spontaneous emission spectrum of this material, which is flatter and wider than that of the identical quantum wells. Two wavelengths of 1.51 μm and 1.53 μm are realized under different work conditions. The side-mode suppression ratios of both wavelengths reach 40 dB. This device can be used as the light source of coarse wavelength division multiplexer communication systems.     

渐变掩蔽图形超低压选择区域生长法制备高质量InGaAsP多量子阱材料

采用超低压(22 mbar)选择区域生长(Selective Area Growth, SAG)金属有机化学汽相沉积(Metal-organic Chemical Vapor Deposition, MOCVD)技术成功制备了高质量InGaAsP/InGaAsP多量子阱(Multiple Quantum Well, MQW)材料. 在较小的掩蔽宽度变化范围内(15—30μm)，得到了46nm的光荧光(Photoluminescence, PL)波长偏移量，PL半高宽(Full-Width-at-Half- 关键词： 超低压 选择区域生长 渐变掩蔽图形     

Offset quantum-well method for tunable distributed Bragg reflector lasers and electro-absorption modulated distributed feedback lasers

Tunable distributed Bragg reflector (DBR) lasers are essential components for future optical fiber communi- cation systems[1]. A tunable laser can replace a large number of distributed feedback (DFB) lasers as sparing source in wavelength division multiplexing (WDM) sys- tems. Moreover they allow flexible switching and routing for distributed data in future network[2]. There are several methods for integrating gain sec- tion with DBR section, such as butt-joint method, bundle method, and …     

超低压选择区域生长法制备产生10GHz重复率超短光脉冲的级联电吸收调制器与分布反馈激光器单片集成光源

采用超低压(22×１０^２Pa)选择区域生长(selective area growth, SAG)金属有机化学气相沉积(metal-organic chemical vapor deposition, MOCVD)技术成功制备了InGaAsP/InGaAsP 级联电吸收调制器(electroabsorption modulator, EAM)与分布反馈激光器(distributed feedback laser, DFB)单片集成光源的新型光电器件.实验结果表明，采用该技术制备的器件 关键词： 超低压 选择区域生长 集成光电子器件 超短光脉冲     

A 10-GHz Bandwidth Electroabsorption Modulated Laser by Ultra-Low-Pressure Selective Area Growth

A novel integration technique has been developed using band-gap energy control of InGaAsP/InGaAsP multiquantum-well (MQW) structures during simultaneous ultra-low-pressure (22 mbar) selective-area-growth (SAG) process in metal-organic chemical vapour deposition. A fundamental study of the controllability of band gap energy by the SAG method is performed. A large band-gap photoluminescence wavelength shift of 83nm is obtained with a small mask width variation (0-30μm). The method is then applied to fabricate an MQW distributed-feedback laser monolithically integrated with an electroabsorption modulator. The experimental results exhibit superior device characteristics with low threshold of 19mA, over 24 dB extinction ratio when coupled into a single mode fibre. More than 10 GHz modulation bandwidth is also achieved, which demonstrates that the ultra-low-pressure SAG technique is a promising approach for high-speed transmission photonic integrated circuits.     

1300nm超辐射发光二极管寿命测试

作为光纤陀螺用光源的超辐射发光二极管(SLD)随着工作时间的延续,其性能会发生退化.采用加速老化的实验方法来估算InGaAsP SLD管芯的工作寿命.分别在环境温度373 K和358 K下对5只SLD管芯进行加速老化,并通过对P-t曲线拟合来推算和估计管芯的老化速率和激活能.计算出了器件的激活能平均值约为0.82 eV,SLD管芯在室温下的工作寿命超过106h,可以满足光纤陀螺用光源的寿命要求.对影响SLD管芯可靠性的因素以及管芯的退化机理进行了分析,为研制高可靠性的超辐射发光二极管提供了理论基础.