LED微阵列投影系统设计

为满足便携式投影仪的市场需求,设计了一种基于LED微型阵列的投影系统。该系统由显示单元和投影物镜构成。采用尺寸为12 mm×9 mm的自发光LED微型阵列作为系统的显示单元,利用光学设计软件设计了投影物镜。投影物镜采用反远距光学结构,全视场角为80°,焦距为8 mm,属于强光、广角镜头。在空间频率20 lp/mm处,该物镜的调制传递函数大于0. 85,畸变小于2%,符合投影系统的设计要求。该投影系统具有体积小,结构简单,投影效果好,易加工等诸多优势,可为第三代投影技术的发展提供参考。     

光辐射吸收材料表面形貌与吸收率关系研究

光辐射吸收材料不同的表面形貌对入射光具有不同的多重反射吸收效果,对光辐射的吸收有较大的影响,合适的表面形貌可以提高光辐射有效吸收率.本文通过光线追迹的方法对V形表面、正弦表面、具有正态倾角(平均倾角)分布的表面以及具有正态高度分布的表面进行模拟, 分析了这四种表面对光辐射吸收率的提升效果及其入射角特性.通过倾角分布分析,得出不同表面形貌提升吸收率共同的必要条件,即倾角中心分布至少大于30°,并指出V形表面在正入射时对吸收率提升的优越性. 关键词： 光吸收材料 表面形貌 吸收率 表面倾角分布     

窄带傅里叶变换光谱仪中平稳高斯噪声的理论分析

在本文所研究的空间调制型傅里叶变换光谱仪中, 在窄的光谱带宽内进行探测可以有效提高光谱的分辨率. 为了研究光源辐射噪声对系统的影响, 本文将辐射噪声归纳为一种高斯窄带的平稳随机过程, 利用线性系统分析方法, 根据统计学原理推导了辐射噪声作为随机变量通过干涉系统前后的输入信噪比与输出信噪比. 然后, 对于一个具有窄带矩形光谱的系统进行了计算仿真, 得出了信噪比增益随着光程差在不同自相关度和互相关度取值时的变化情况. 仿真结果表明, 不同光程差下的信噪比增益在相关度空间是一单调的平滑曲面, 增益极值始终沿着相关度圆的半径和周线移动, 并且经过一个光程差又回到初始的位置. 根据对信噪比增益的分析, 可以将噪声的相关度取值控制在某一范围之内, 并作为系统光源设计与测试的依据.     

一种平行背栅极碳纳米管阵列的场增强因子计算

建立一种平行背栅极碳纳米管阵列阴极,基于电场叠加原理,利用镜像电荷法对其进行计算,给出碳纳米管顶端表面电场增强因子。在此基础上,进一步分析器件各类参数对电场增强因子的影响。分析表明,碳纳米管阵列阴极具有最佳阵列密度,其对应碳纳米管间距大约为碳纳米管高度的两倍,靠阴极阵列边缘部位的碳纳米管发射电子能力比其中心部位的大。除了碳纳米管的长径比之外,栅极宽度、栅极厚度和栅极间距等也对电场增强因子有一定的影响:栅极越宽,场增强因子越大;而栅极厚度、栅极间距越大,场增强因子就越小。     

快照式干涉成像光谱仪阶梯面形误差特性分析

快照式干涉成像光谱仪通过微透镜阵列多重成像与多级微反射镜相位调制的光场耦合,实现动态场景图像光谱的同时探测。多级微反射镜的基片加工精度及膜层表面应力会导致阶梯面产生弯曲形变,从而影响光谱与成像的质量。分析了多级微反射镜阶梯面弯曲形变的面形误差特性,建立了阶梯面形误差的光场传输模型。计算结果表明,不同的阶梯面形误差分布情况会引起各视场干涉像点阵列不同的强度改变,并导致复原光谱中出现不同的噪声分布特征。阶梯面形误差会在不同成像视场的复原光谱中引入相位误差,并对相干像点的强度分布进行调制。重建光谱误差随着两个多级微反射镜阶梯矢高绝对值的增加单调递增,通过该关系便可以由阶梯矢高实测值对系统性能进行评估,并为器件制作提供理论指导。     

Design and fabrication of one-dimensional focusing X-ray compound lens with Al material

A method based on Fourier spectrum analysis for predicting the performances of the X-ray compound lenses is briefly introduced, the theoretical result obtained is the same as that of Fresnel-Kirchhoff approach. A kind of technique named moulding is developed for fabricating the one-dimensional (1D) compound X-ray lens with Al material and the fabrication process is presented. In addition, a two-time coating method is used to improve the numerical apertures of the compound lenses. Furthermore, the focusing performance of the Al compound X-ray lens under the high energy X-rays is measured.     

A top-face-sway electromagnetic micromotor

In this paper, the structure of a top-face-sway electromagnetic micromotor and its principle, fabrication and performance are introduced. A combination of the electromagnetic actuating and the planetary reducing provides this micromotor an advantage of low rotational speed and high torque. In addition, since a flexible coupling absorbs the sway and only outputs rotation, it gives this micromotor a balanced output. The dimension of the micromotor is 5 mm. Its rotation speed has a range of 20 - 860 rpm, and its driving current is 300 mA. The output torque of the micromotor is measured to be 13.0 uNm.     

A method based on diffraction theory for predicting 3D focusing performance of compound refractive X-ray lenses

A method based on the diffraction theory for estimating the three-dimensional (3D) focusing performance of the compound refractive X-ray lenses is presented in this paper. As a special application, the 3D X-ray intensity distribution near the focus is derived for a plano-concave compound refractive X-ray lens. Moreover, the computer codes are developed and some results of 3D focusing performance for a compound refractive X-ray lens with Si material are shown and discussed.     

A theoretical method based on Fourier spectrum analysis for the focusing performances of the X-ray compound refractive lenses

It is important to predict the intensity distribution in focusing plane for designing the X-ray compound refractive lenses. On the basis of analyzing the structure of X-ray compound lenses and comparing it with Praunhofer diffraction system, it is concluded that the X-ray focusing system can be regarded as a kind of Praunhofer diffraction system. Therefore, a method based on Fourier spectrum analysis is presented to predict the intensity distribution in the focusing plane for the X-ray lenses. A brief analysis on the relationship between the parameters of X-ray lenses and their focusing performance is also given in this paper.     

一种微型光开关的设计与仿真分析

介绍了一种新型的聚酰亚胺(PI)悬臂梁式电磁驱动微机电系统(MEMS)光开关,并对其总体结构进行了设计与仿真分析.运用有限元分析的方法,设计了永磁体的最佳尺寸并优化了悬臂梁的结构;分析了聚酰亚胺悬臂梁的扭转力、电磁力与挠度的关系.当输入电流为75 mA时,聚酰亚胺悬臂梁达到平衡时的挠度约为1.02 mm,能够满足器件转换光路的要求.