An Economical Magnetocardiogram System Based on High-To SQUIDs

An economical magnetocardiogram （MCG） system is built in our laboratory. It mainly consists of a MCG data acquisition stage equipped with two high-To superconducting quantum interference device （SQUID） magnetometers, a data processing stage with digital filtering and a one-layer μ-metal magnetically shielded room in conjunction with a high-Tc SQUID based active compensation. Experimental results show that a noise level of pico-tesla in MCG profiles, which is necessary for clinical applications, may be achieved with the system. Moreover, stable and convenient operations of the system are demonstrated with simulating MCG measurements.     

一种互补型自适应滤波最小均方法在SQUID测量的心磁信号中的应用

提出了一种互补型自适应滤波最小均方算法在SQUID测量的心磁信号中的应用，快的收敛速度和很好的跟踪能力通过根据最小均方原则在两个滤波器之间来回转换加权参量来实现     

互补型自适应滤波器在心磁信号处理中的应用

将心磁信号从干扰噪声中加以提取并有效地消除噪声干扰是心磁信号处理中尤为重要的环节 .从改进算法的角度出发，提出互补型自适应滤波器结构以实现心磁信号的消噪处理.该滤波器针对心磁这类非平稳信号进行设计，有效地解决了常规自适应滤波器应用于心磁信号处理时收敛速度和稳态误差的矛盾.通过仿真实验和心磁实验结果表明，该算法能有效地消除心磁信号的背景噪声和工频干扰噪声.同时该算法也可用于其他非平稳信号的消噪处理. 关键词： 自适应滤波 心磁图 最小均方误差     

A digital filtering scheme for SQUID based magnetocardiography

Considering the properties of slow change and quasi-periodicity of magnetocardiography （MCG） signal, we use an integrated technique of adaptive and low-pass filtering in dealing with two-channel MCG data measured by high Tc SQUIDs. The adaptive filter in the time domain is based on a noise feedback normalized least-mean-square （NLMS） algorithm, and the low-pass filter with a cutoff at 100Hz in the frequeucy domain characterized by Caussian functions is combined with a notch at the power line frequency. In this way, both relevant and irrelevant noises in original MCG data are largely eliminated. The method may also be useful for other slowly varying quasi-periodical signals.     

Singular value decomposition with normalized period for magnetocaridiography signal processing

In this paper, we have developed an algorithm based on singular value decomposition （SVD） for matrix. And the novel SVD algorithm with normalized period of cardiac cycles is presented. The results from real magnetocardiography （MCG） data processing show that the new algorithm is better than the standard one not only in suppressing noises, but also in providing high-fidelity MCG signals.     

尼龙-1010结晶结构

用WAXD方法测定了Nylon-1010为三斜晶系结晶结构;α=4.9(?),b=5.4(?),c=27.8(?),α=49°,β=77°,γ=63.5°,每个聚合物单胞含有一个重复单元,空间群为P(?)。模压试样用Ruland方法分析结晶度为60％。以上。电子密度相关函数法分析了SAXS现象,求得了Nylon-1010结晶片层厚度、过渡层厚度、长周期、比内表面及电子密度差。     

APPLICATION OF THE MOMENT METHODS TO ANALYSIS OF X-RAY DIFFRACTION LINE PROFILE FOR PA1010-BMI SYSTEM

Pure X-ray diffraction profiles have been analysed for polyamide 1010 and PA1010--BMI system by means of multipeak fitting resolution of X-ray diffraction.The methods ofvariance and fourth moment have been applied to determine the particle size and strainvalues for theparacrystalline materials.The results indicated that both variance and fourthmoment of X-ray diffraction line profile yielded approximately the same values of theparticle size and the strain.The particle sizes of(100)reflection have been found todecrease with increasing BMI content,whereas the strain values increased.     

用WAXD和SAXS研究辐照聚酰胺1010结构

用ＷＡＸＤ和ＳＡＸＳ方法研究了聚酰胺１０１０的聚集态结构和结晶结构的辐射损伤过程和机理。辐射交联与裂解主要在非晶区和结晶表面或中间相发生；辐射损伤并从这里开始，随辐射剂量增大，非晶化逐渐向晶区伸展，有氢键的（０１０）晶面损伤几率高于（１００）晶面；辐射后效应导致新的交联与裂解生成，主要影响（０１０）晶面的形成与完善，使Ｌ１００及Ｗｃ变小。     

结晶聚合物的辐射效应：多官能团单体对LDPE的结晶成核作用

根据x射线、电镜、DSC和凝胶分数的测试结果,讨论了多官能团单体结构对低密度聚乙烯聚集态结构的影响以及结晶度与辐射交联(或剂量)的关系。发现由于单体的存在导致低密度聚乙烯结晶度增加而结晶尺寸变小(即结晶成核效应);成核效应越大,增强辐射交联的效果也越大。添加具有高结晶成核作用的单体有利于低密度聚乙烯的辐射交联,同时也加速其结晶结构的破坏。     

Cu-bipy-BTC衍生碳基材料的制备及其氧还原电催化性能

制备高效、廉价的氧还原(ORR)电催化剂是燃料电池的技术关键. 本文采用水热法制备出前驱体金属有机骨架化合物（MOF：Cu-bipy-BTC,bipy=2,2′-联吡啶,BTC=均苯三甲酸）后,再高温煅烧得到碳基材料MOF-800. 采用扫描电镜、X射线衍射、红外光谱、氮气吸附/脱附等温线和X射线光电子谱表征了材料的形貌和结构特征;采用线性扫描伏安曲线、i-t曲线等考察了材料的氧还原催化性能. 结果表明,与前驱体Cu-bipy-BTC相比,MOF-800含有大量的微孔(0.5 ~ 1.3 nm),为铜、氮掺杂多孔碳. MOF-800的电荷转移阻抗为10.6 Ω,比Cu-bipy-BTC降低了97.2%,具有优良的导电性. MOF-800具有优异的ORR催化性能,其起始电位约为-0.04 V(vs. Ag/AgCl),其电子转移数接近4. 铜、氮掺杂的多孔碳结构导电性好,高含量的吡啶氮、吡咯氮和石墨氮提供了大量催化活性位点(C-N, Cu-N_x),是MOF-800具有高氧还原电催化性能的主要原因. 本研究可为煅烧Cu-bipy-BTC制备碳基材料用于燃料电池修饰阴极提供技术支撑与理论依据.