Enhanced thermoelectric performance of PEDOT:PSS films via ionic liquid post-treatment

Thermoelectric(TE)energy harvesting can effectively convert waste heat into electricity,which is a crucial technology to solve energy concerns.As a promising candidate for energy conversion,poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate)(PEDOT:PSS)has gained significant attention owing to its easy doping,high transparency,and solution processability.However,the TE performance of PEDOT:PSS still needs to be further enhanced.Herein,different approaches have been applied for tuning the TE properties:(i)direct dipping PEDOT:PSS thin films in ionic liquid;(ii)post-treatment of the films with concentrated sulfuric acid(H₂SO₄),and then dipping in ionic liquid.Besides,the same bis(trifluoromethanesulfonyl)amide(TFSI)anion and different cation salts,including 1-ethyl-3-methylimidazolium(EMIM+)and lithium(Li+),are selected to study the influence of varying cation types on the TE properties of PEDOT:PSS.The Seebeck coefficient and electrical conductivity of the PEDOT:PSS film treated with H2SO4EMIM:TFSI increase simultaneously,and the resulting maximum power factor is 46.7μW·m^-1·K^-2,which may be attributed to the ionic liquid facilitating the rearrangement of the molecular chain of PEDOT.The work provides a reference for the development of organic films with high TE properties.     

X-ray emission for Ar11+ ions impacting on various targets in the collisions near the Bohr velocity

X-ray emission from the collisions of 3 MeV Ar¹¹⁺ ions with V, Fe, Co, Ni, Cu, and Zn is investigated. Both the x-rays of the target atom and projectile are observed simultaneously. The x-ray yield is extracted from the original count. The inner-shell ionization cross section is estimated by the binary encounter approximation model and compared with the experimental result. The remarkable result is that the Ar K-shell x-ray yield is diminished with the target atomic number increasing, which is completely opposite to the theoretical calculation. That is interpreted by the competitive consumption of the energy loss for the ionization of inner-shell electrons between the projectile and target atom.     

好的问题并渐次呈现:教学设计的两个关键--从教学设计的“三二一”说起

一、从教学设计的“三二一”说起近读《章建跃数学教育随想录(下卷)》,章建跃博士关于“搞好教学设计,提高教学质量”的论述中提出教学设计的“三二一”,即三个基本点(理解数学、理解学生、理解教学),两个关键(提好的问题、设计自然的过程),一个核心(设计概括过程).     

硫氰酸酯类化合物的合成及其应用研究进展

硫氰酸酯类化合物(RSCN)作为重要的合成中间体,在农药、医药、材料等领域有着广泛的应用价值.近年来,硫氰酸酯的合成及其应用研究发展迅速,不断有新的硫氰酸酯合成方法和以其为原料的转化反应涌现.综述了近几年来发展的硫氰酸酯合成方法及其转化应用,为硫氰酸酯类化合物的合成和应用研究提供帮助.     

硫化丁苯橡胶纳观界面耐磨机理及参数影响分析

硫化橡胶因其良好的力学和物理化学性能而被广泛作为摩擦副的基础材料. 本文提出了一种硫化交联算法, 实现了C—C键的硫化互交联和自交联, 构建了硫化丁苯橡胶的分子动力学磨损模型, 从微观摩擦学的角度阐明了硫化交联结构对改善丁苯橡胶磨损性能的机理, 研究了不同界面参数对硫化橡胶微观磨损性能的影响. 结果发现 硫化使丁苯橡胶分子链的界面黏附能力和活动能力更弱, 拉伸和解缠能力更低, 磨损过程中界面累积能量更低, 更不容易脱离橡胶基体, 因此可以表现出更好的摩擦学性能, 更强的抗磨损性能; 随着速度的增大, 硫化橡胶的磨损率降低, 与宏观实验结果一致, 原因是硫化橡胶的原子分布函数和相互作用能随着速度增大而降低, 说明橡胶分子链的黏附能力和活动能力随着速度增加趋弱, 温升更低, 导致较低的磨损率; 压入深度对磨损率的影响规律则呈现相反的结果和趋势.     

基于光谱学技术结合分子模拟研究芹菜素与大豆分离蛋白的相互作用

以大豆分离蛋白(SPI)与芹菜素(API)为研究对象,通过采用荧光光谱法、紫外-可见吸收光谱法和圆二色光谱法并结合分子模拟技术研究芹菜素与大豆分离蛋白之间的相互作用。荧光滴定结果表明,芹菜素对大豆分离蛋白的荧光有较强的猝灭作用,为静态猝灭机制。获得的热力学参数熵变与焓变均为负值,表明芹菜素与大豆分离蛋白间的相互作用力主要为氢键和范德华力。同步荧光实验表明,芹菜素与大豆分离蛋白结合导致酪氨酸残基周围微环境疏水性增加和色氨酸残基周围微环境极性增加。三维荧光光谱和圆二色光谱实验表明,芹菜素与大豆分离蛋白作用使得蛋白质多肽链部分伸展,蛋白质表面疏水性下降,巯基含量增加,进一步的分子模拟显示芹菜素分子分别插入到大豆分离蛋白的SPI-7s和SPI-11s的疏水空腔中,与LEU226,GLN77,THR75,HIS76,ASN74以及THR353,THR328,MET329,LEU354,ASP342,LYS113,THR358,LYS330等氨基酸残基发生相互作用,并与HIS76,ANS74以及ARG340,LYS330,THR358,THR328和SER339氨基酸残基形成氢键。