Model and nonlinear dynamic analysis of linear guideway subjected to external periodic excitation in five directions

Nonlinear Dynamics - Investigation of the dynamic characteristics of linear guideway is essential for enhancing structural performance of machine tools. However, few mechanical models are...     

Study on divertor plasma behavior through sweeping strike point in new lower divertor on EAST

A series of L-mode discharges have been conducted in the new ‘corner slot’ divertor on the Experimental Advanced Superconducting Tokamak (EAST) to study the divertor plasma behavior through sweeping strike point. The plasma control system controls the strike point sweeping from the horizontal target to the vertical target through poloidal field coils, with keeping the main plasma stability. The surface temperature of the divertor target cools down as the strike point moves away, indicating that sweeping strike point mitigates the heat load. To avoid the negative effect of probe tip damage, a method based on sweeping strike point is used to get the normalized profile and study the decay length of particle and heat flux on the divertor target λ_js, λ_q. In the discharges with high radio-frequency (RF) heating power, electron temperature T_e is lower and λ_js is larger when the strike point locates on the horizontal target compared to the vertical target, probably due to the corner effect. In the Ohmic discharges, λ_js, λ_q are much larger compared to the discharges with high RF heating power, which may be attributed to lower edge T_e.     

Aqueous-processed insulating polymer/nanocrystal solar cells with effective suppression of the leakage current and carrier recombination

As one of the most environmentally friendly photovoltaic(PV) conversion equipments,aqueousprocessed CdTe nanocrystal solar cells(NC SCs) have attracted great interest in recent years because of their excellent properties such as high charge-carrier mobility and broad absorption.However,two issues including interfacial recombination and leakage current seriously restrict their performance.In this paper,insulating polymer poly(vinyl pyrrolidone)(PVP) is introduced into CdTe NC SCs to solve the problems.The experimental results of transmission electron microscopy(TEM),atomic force micro scopy(AFM) and dark current measurements,etc.,demonstrate the leakage current is effectively suppressed by introducing PVP.Through further designing device structure,the reduction of interfacial recombination after introducing PVP is confirmed.By strategically taking the advantages of PVP properties(e.g.,water solubility and thermostability),the power conversion efficiency of the devices with PVP is enhanced by almost 37% compared to pure CdTe devices.This work demonstrates an effective and low-cost method to fabricate NC SCs via aqueous route.Moreover,it also proves that appropriate content of insulating polymer is of beneficial in promoting the PV performance.     

Thermal analysis of beamline heat load components due to increased power delivery from EAST neutral beam injector

Journal of Thermal Analysis and Calorimetry - According to EAST’s experimental plan, the long-pulse and high-power operation of neutral beam injector is the requirement for EAST. In this...     

EAST装置上W波段多道极向相关反射仪的研制

在EAST装置上安装了X模极化W波段多道相关反射仪，用于测量等离子体芯部密度涨落。该诊断利用低损耗(<3dB)多工器将4个不同频率(79.2GHz，85.2GHz，91.8GHz和96GHz)的微波耦合在一起，通过同一个天线发射。反射波由两个极向分离(~5cm)的天线接收，通过下变频技术实现外差测量。通过对两个极向天线接收的信号进行相关分析，获得芯部湍流垂直速度。对2018年低约束模式(L模)放电进行分析发现，在电子回旋共振加热(ECRH)等离子体中，芯部湍流垂直速度在电子逆磁漂移方向。而在注入同向中性束(co-NBI)后，芯部湍流垂直速度变为离子逆磁漂移方向。     

空间外差光谱仪光谱降噪方法研究

空间外差光谱仪是一种新式的超高分辨率光谱仪，可用于大气监测、卫星遥感等领域。为了减少空间外差光谱信号中的噪声，提出基于提升小波变换结合中值滤波方法来实现信号的降噪。改进的提升小波变换融合了一种双因子的阈值函数、分层阈值选取。与小波变换的软、硬阈值对比发现，它能提取空间外差光谱，减小峰宽和保留重要的细节特征，降噪效果优于小波变换的软、硬阈值法。最后用信噪比和均方误差两项定量指标来衡量算法的效果。实验结果表明:该算法比软阈值法在处理氙灯和积分球时信噪比提高了24.6%和31%，均方误差减少了43.2%和51.5%；与硬阈值法相比信噪比提高了21.5%和30.6%，均方误差减少了40.2%和51.2%。因此，算法在空间外差光谱降噪方面具有可行性。     

QEPAS系统中石英音叉模态仿真计算与研究

对石英音叉增强型光声光谱(QEPAS)系统中常用的石英音叉进行了有限元模态计算，获得石英音叉前6阶振型与模态频率，认知了第4阶对称摆动振型为有效振动，利用单因素法分析了石英音叉的音臂长度l₁、音臂宽度w₁、音臂厚度t、音臂切角θ、音臂圆孔直径d及音臂圆孔高度h对低阶有效共振频率(Fre)的影响，敏感度依次为： l₁> w₁>d>θ>t>h，考虑实际设计情形，筛选出了l₁，w₁，d与h四个石英音叉设计变量，采用Box-Behnken实验设计方案与RSM(response surface methodology)方法，以Fre为函数目标，建立l₁，w₁，d与h的二次回归响应面模型，得到了参数之间的交互作用，利用Design-Expert软件对响应面模型进行设计参数反求，结果表明，在15 000 Hz≤Fre≤25 000 Hz计算区域内误差较小，基本满足QEPAS系统的计算需求，所提出的研究与设计方法具有一定通用性，可为QEPAS系统中石英音叉结构参数设计提供参考。     

GOSs-稀土配合物紫外增强材料的光谱分析与稳定性研究

氧化石墨烯薄片(GOSs)作为一种新型的二维片状材料,具有较高的比表面积、丰富的表面含氧官能团以及良好的光热稳定性。而稀土配合物通过无机稀土元素与有机配体的结合表现出优异的荧光特性。为了将两类材料具有的物化特性结合起来应用于紫外光谱探测领域。选取了合适的有机配体啉菲罗啉(1,10-邻二氮杂菲,phen)、2’2-联嘧啶(bpm)作为桥联分子,把氧化石墨烯(GOSs)与稀土配合物通过氢键自组装作用进行复合,制备了高效稳定可调的GOSs-稀土配合物复合荧光材料GOSs-Eu(BA)3phen和GOSs-Eu(TTA)3bpm,并且制备了相应的聚乙烯醇(PVA)共混紫外增强薄膜,对其光谱特性与稳定性进行了深入的研究。采用红外光谱、扫描电镜和金相显微镜等方法,对紫外增强材料进行了性能表征。采用吸收光谱,荧光光谱等方法,对紫外增强薄膜进行了性能表征。此外,通过热重测试(TGA)表征了GOSs氢键复合前后紫外增强材料的热稳定性,通过荧光强度-紫外光照次数表征了GOSs氢键复合前后紫外增强薄膜的光稳定性。红外光谱分析发现,进行配位前后有机配体的特征峰产生了频移,表明稀土配合物中Eu 3+与配体之间存在着明显的配位作用。在进行复合之后,桥联配体的特征峰也产生了偏移,表明GOSs与稀土配合物通过桥联分子的氢键作用进行了进行复合。吸收光谱与荧光光谱测定结果表明增强薄膜吸收峰在200~400 nm,荧光主峰在612 nm左右,为Eu 3+特征红色荧光峰,且不同配体可以实现不同范围的吸收产生差异化的荧光表现。扫描电镜和金相显微镜清晰地展示了稀土配合物复合前后的微观形貌,即颗粒状稀土配合物附着在石墨烯薄片上。光稳定性测试表明经过GOSs氢键复合之后,Eu(BA)3phen和Eu(TTA)3bpm稀土配合物荧光材料在进行25次荧光强度测试后光漂白程度分别下降了4.26%和6.41%,提高了其光稳定性。热重测试也表明在经过GOSs氢键复合之后,稀土配合物的热稳定性有了很大提高。总之,得益于GOSs和稀土配合物的特性结合,所制备的紫外增强材料表现出优异的荧光特性与稳定性,必将在紫外探测方面有着广阔的应用前景。