Gear shifting multi-objective optimization to improve vehicle performance,fuel consumption,and engine emissions

In the present work, the Adaptive-Weight Genetic Algorithm was employed in order to determine the gear shifting strategies that allow an automobile to work in the best compromise among fuel consumption, engine emissions, and vehicle performance. For the assessment of each of the three objective functions, a simulation model based on engine data and on the well-established equations of the longitudinal dynamics was developed. The driving cycle chosen for the calculations was the FTP-75, which takes into account both cold and hot starts, meaning that the transient operation during the warm-up of the catalyst is also considered.     

A self‐adaptive intelligence gray prediction model with the optimal fractional order accumulating operator and its application

The self‐adaptive intelligence gray predictive model (SAIGM) has an alterable‐flexible model structure, and it can build a dynamic structure to fit different external environments by adjusting the parameter values of SAIGM. However, the order number of the raw SAIGM model is not optimal, which is an integer. For this, a new SAIGM model with the fractional order accumulating operator (SAIGM_FO) was proposed in this paper. Specifically, the final restored expression of SAIGM_FO was deduced in detail, and the parameter estimation method of SAIGM_FO was studied. After that, the Particle Swarm Optimization algorithm was used to optimize the order number of SAIGM_FO, and some steps were provided. Finally, the SAIGM_FO model was applied to simulate China's electricity consumption from 2001 to 2008 and forecast it during 2009 to 2015, and the mean relative simulation and prediction percentage errors of the new model were only 0.860% and 2.661%, in comparison with the ones obtained from the raw SAIGM model, the GM(1, 1) model with the optimal fractional order accumulating operator and the GM(1, 1) model, which were (1.201%, 5.321%), (1.356%, 3.324%), and (2.013%, 23.944%), respectively. The findings showed both the simulation and the prediction performance of the proposed SAIGM_FO model were the best among the 4 models.     

基于改进的GM(1,1)-Markov链组合模型广东省单位GDP能耗预测

本文以灰色系统理论的GM(1,1)模型和随机过程理论的Markov链模型为基础构建了一个动态GM(1,1)-Markov链组合预测模型。该模型同时利用了GM(1,1)模型对序列趋势因素良好的拟合能力和Markov链模型对残差序列信息的提取能力。为进一步提高该模型的预测精度,用泰勒(Taylor)近似方法和新信息优先的思想对该模型进行了改进。最后,以1991-2014年广东省单位GDP能耗数据实证了该模型的预测效果。     

区域低碳协同发展评价:京津冀、长三角和珠三角城市群的比较分析

京津冀、长三角和珠三角城市群是中国经济高度发达、最具发展潜力的区域,在低碳发展方面起到引领作用.从经济、资源、环境和绩效的角度构建区域低碳协同发展评价指标体系,采用结合逼近理想解的TOPSIS方法、灰色关联理论和距离协同模型,利用2005~2014年三大城市群50个城市数据实证分析了三大城市群的低碳协同发展程度.结果表明,三大城市群低碳协同发展度整体上呈现上升趋势,其低碳协同程度从高到底依次为长三角、珠三角和京津冀城市群.     

湖南大湘西地区城市经济竞争力比较研究

在现有城市经济竞争力分析的国内外研究成果的基础上,依据城市竞争力相关理论,借鉴国内外评价机构的评价模型和分析体系,构建出湖南省大湘西地区城市经济竞争力的评价指标体系,并利用因子分析法对大湘西地区城市经济竞争力进行综合评价,并对各个城市的经济竞争力进行比较研究.在此基础上,有针对性地提出了促进大湘西地区城市经济竞争力提升的对策建议.     

Effect of Filtrated Osmotic Solution Based on Concentrated Chokeberry Juice and Mint Extract on the Drying Kinetics,Energy Consumption and Physicochemical Properties of Dried Apples

Background: Filtration of osmotic solution affects selective penetration during osmotic dehydration (OD), and after drying is finished, this can influence the chemical composition of the material, which is also modified by OD. Methods: Osmotic dehydration was carried out in filtrated and non-filtrated concentrated chokeberry juice with the addition of mint infusion. Then, this underwent convective drying, vacuum-microwave drying and combined convective pre-drying, followed by vacuum-microwave finishing drying. Drying kinetics were presented and mathematical models were selected. The specific energy consumption for each drying method was calculated and the energy efficiency was determined. Results and Discussion: The study revealed that filtration of osmotic solution did not have significant effect on drying kinetics; however, it affected selective penetration during OD. The highest specific energy consumption was obtained for the samples treated by convective drying (CD) (around 170 kJ·g⁻¹ fresh weight (fw)) and the lowest for the samples treated by vacuum-microwave drying (VMD) (around 30 kJ·g⁻¹ fw), which is due to the differences in the time of drying and when these methods are applied. Conclusions: Filtration of the osmotic solution can be used to obtain the desired material after drying and the VMD method is the most appropriate considering both phenolic acid content and the energy aspect of drying.     

以印染废水为主的城镇污水处理厂锑污染来源特征分析

为研究以印染废水为主的城镇污水处理厂锑污染来源特征,对浙江省嘉善县某污水处理厂及纳管行业进行水体锑(Sb)的采样分析,同时对印染和喷水纺织两大行业的锑污染源进行分析.研究表明,在污水处理厂纳管废水中,印染行业废水占纳管总量的55.2%,排锑量占总量的79.3%,是该污水处理厂锑污染的主要来源;在印染生产过程中,布料中锑的平均流失量为7mg·kg~(-1),平均损失率为13%,污染物锑在退浆、水洗和染色工艺段中的释放量依次为:染色退浆水洗;喷水纺织织造工艺中锑的释放量较少,布料中锑的平均流失量为2.2mg·kg~(-1),平均损失率仅为2.1%;污水处理厂进出水、印染各工段废水和织造废水中,锑主要以Sb(V)形态存在.     

基于连续用电量和缴费时间差的客户信用动态评价模型

加大供电量和提高电费回收效率是供电商增加收益的主要途径,并且用电客户的缴费时间差直接影响着电费回收效率。在用电客户信息较少的情况下,仅仅依赖用电客户的用电量信息和缴费时间差信息,采用扩展的“S型”函数对用电量信息和缴费时间差信息进行整合建模,构建了一个能够度量客户持续用电能力和缴纳电费积极性的客户信用动态评价模型。应用构建的模型对赤峰市宁城县实际用电客户进行信用评价,评价结果与领域专家评价结果具有较高的一致性。     

浙江省城镇建设用地空间扩展时空特征分析

运用1990~2015年浙江省6期土地利用数据, 使用扩展速率、扩展强度、分形维数等指标分析浙江省城镇建设用地空间格局. 结果表明 (1)1990~2015年, 浙江省城镇建设用地增长在5个时期呈现“W”趋势, 从不同行政等级来看, 扩展速度的发展趋势具有一致性, 2000~2005年是浙江省不同行政等级的城市城镇用地扩展速度的最快阶段. (2)从扩展强度来看, 浙江省在2000~ 2005年对城镇用地扩展最大, 其他时期基本维持稳定. 地势平缓的城市往往开发强度大, 丘陵地区的城市处于缓慢扩展阶段. (3)浙江省城镇用地空间结构的分形维数和稳定性特征存在波动性. 城镇用地的空间结构特征与城镇用地增长过程和发展阶段具有一定的联系. (4)浙江省城镇用地重心受到地形限制明显. 西南地区受到丘陵地形影响, 重心移动方向大多数与斜长的峡谷平行; 北部平原区域的城镇用地的重心变化往往受到经济等社会因素影响较大. (5)浙江省城镇建设用地空间扩展的影响因素上存在一定规律, 可看出1995年、2010年、2015年主要倾向于社会经济的影响, 在2000年、2005年则倾向于自然因素的影响.     

大数据背景下水厂自动投矾模型研究

根据某市自来水有限责任公司第二水厂的历史矾耗数据，建立矾耗流量关于原水浊度、温度等的动态矾耗模型. 通过对数据进行处理得到10900个合格且净水效果高效的数据，将筛选出的数据分为训练样本集和测试样本集. 在回归拟合中，通过拟合R2的大小将原水浊度划分为“低浊”“中浊”“高浊”3个区间，利用泰勒展开公式的非线性变量代换分别对3个区间建立不同的多项式回归模型，得到预测正确率约为72%，总的矾耗流量值约减少了9.6%的结果；在随机森林模型中，使用10900个合格数据，利用训练样本集，以“原水浊度”“pH值”“原水流量”和“水温”为输入变量，建立包含2000棵决策树的随机森林模型，得到预测正确率约为44. 21%，总的矾耗流量值增加了0.04%的结果. 从模型对合格数据的拟合优度看，随机森林模型比非线性回归模型效果更好；在平均绝对误差、平均绝对偏差百分比等评价指标上，前者均优于后者；但从历史数据检验的结果，模型的可解读性，模型的操作难度和推广角度看，分段二元非线性回归模型的优势更为突出.