Optimization of Transducer Location for Novel Non-Intrusive Methodologies of Diagnosis in Diesel Engines

The health monitoring has been studied to ensure integrity of design of engine structure by detection, quantification, and prediction of damages. Early detection of faults may allow the downtime of maintenance to be rescheduled, thus preventing sudden shutdown of machines. In cylinder pressure developed, vibrations and noise emissions data provide a rich source of information about condition of engines. Monitoring of vibrations and noise emissions are novel non-intrusive methodologies for which positioning of various transducers are important issue. The presented work shows applicability of these diagnosis methodologies adopted in case of diesel engines. The effects of changing various fuel injection parameters was analyzed. Scope of using non-intrusive technique has been analyzed by changing locations of microphone. Novelty of this worklies in exploring signal processing methods for various locations around the engine test set up. Various frequency ranges of contributing noise and vibration sources were identified. Time-Frequency analysis showed the onset of various cyclic. Based on the identification of various frequency bands, it is possible to device suitable filters in order to extract more information.     

Simple Equations Method (SEsM): Algorithm,Connection with Hirota Method,Inverse Scattering Transform Method,and Several Other Methods

The goal of this article is to discuss the Simple Equations Method (SEsM) for obtaining exact solutions of nonlinear partial differential equations and to show that several well-known methods for obtaining exact solutions of such equations are connected to SEsM. In more detail, we show that the Hirota method is connected to a particular case of SEsM for a specific form of the function from Step 2 of SEsM and for simple equations of the kinds of differential equations for exponential functions. We illustrate this particular case of SEsM by obtaining the three- soliton solution of the Korteweg-de Vries equation, two-soliton solution of the nonlinear Schrödinger equation, and the soliton solution of the Ishimori equation for the spin dynamics of ferromagnetic materials. Then we show that a particular case of SEsM can be used in order to reproduce the methodology of the inverse scattering transform method for the case of the Burgers equation and Korteweg-de Vries equation. This particular case is connected to use of a specific case of Step 2 of SEsM. This step is connected to: (i) representation of the solution of the solved nonlinear partial differential equation as expansion as power series containing powers of a “small” parameter ϵ; (ii) solving the differential equations arising from this representation by means of Fourier series, and (iii) transition from the obtained solution for small values of ϵ to solution for arbitrary finite values of ϵ. Finally, we show that the much-used homogeneous balance method, extended homogeneous balance method, auxiliary equation method, Jacobi elliptic function expansion method, F-expansion method, modified simple equation method, trial function method and first integral method are connected to particular cases of SEsM.     

高效大面积有机白光照明研究及其展望

白光有机发光二极管(OLED)是新一代健康节能照明光源,光效性能已超过荧光灯水平。自从OLED技术问世以来,研究人员陆续开展了关于OLED照明的研究工作。本文介绍了OLED照明的特点,以及国内外OLED照明发展现状,讨论了发展OLED照明技术和装备国产化所亟待解决的重大难题和面临的挑战,重点论述了发展高效大面积OLED照明器件制备技术及推动OLED照明产业化的重要意义。     

河北省装备制造产业发展的灰色关联分析

基于灰色系统中的关联分析方法,从动态的视角出发,对河北省装备制造产业生产总值与装备制造产业系统内部结构关系进行研究分析,得出河北省装备制造产业的发展具有以下特点:金属制品业等资源加工型产业依旧在装备制造产业中占据主导地位,通用装备业和仪器仪表业等技术密集型产业的贡献率相对不足.因此,应从河北省的实际情况出发,不断优化装备制造的内部产业结构。     

An interlaboratory capillary zone electrophoresis-UV study of various monoclonal antibodies,instruments, and ε-aminocaproic acid lots

Capillary zone electrophoresis ultraviolet (CZE-UV) has become increasingly popular for the charge heterogeneity determination of mAbs and vaccines. The ε-aminocaproic acid (eACA) CZE-UV method has been used as a rapid platform method. However, in the last years, several issues have been observed, for example, loss in electrophoretic resolution or baseline drifts. Evaluating the role of eACA on the reported issues, various laboratories were requested to provide their routinely used eACA CZE-UV methods, and background electrolyte compositions. Although every laboratory claimed to use the He et al. eACA CZE-UV method, most methods actually deviate from He's. Subsequently, a detailed interlaboratory study was designed wherein two commercially available mAbs (Waters’ Mass Check Standard mAb [pI 7] and NISTmAb [pI 9]) were provided to each laboratory, along with two detailed eACA CZE-UV protocols for a short-end, high-speed, and a long-end, high-resolution method. Ten laboratories participated each using their own instruments, and commodities, showing excellence method performance (relative standard deviations [RSDs] of percent time-corrected main peak areas from 0.2% to 1.9%, and RSDs of migration times from 0.7% to 1.8% [n = 50 per laboratory], analysis times in some cases as short as 2.5 min). This study clarified that eACA is not the main reason for the abovementioned variations.     

Impact of Matrix Metalloproteinase-9 during Periodontitis and Cardiovascular Diseases

Matrix metalloproteinase-9 (MMP-9) has been shown to play a key role in endothelial function and perhaps pivotal in the correlation between periodontal disease and cardiovascular disease (CVD). For the study, the impact of MMP-9 of periodontitis and CVD on serum and saliva concentrations was analyzed. For the study patients with periodontitis (n = 31), CVD (n = 31), periodontitis + CVD (n = 31), and healthy patients (n = 31) were enrolled. Clinical and demographic characteristics as well as serum and salivary MMP-9 were evaluated. MMP-9 concentrations in serum and saliva were statistically elevated in patients with CVD (p < 0.01) and in patients with periodontitis plus CVD (p < 0.001) compared to patients with periodontitis and healthy subjects. Multivariate regression analysis showed that c-reactive protein (hs-CRP) was the only significant predictor for MMP-9 serum (p < 0.001), whereas hs-CRP (p < 0.001) and total cholesterol (p = 0.029) were the statistically significant salivary MMP-9 predictors. This study evidenced that patients with CVD and periodontitis + CVD presented elevated MMP-9 concentrations in serum and saliva compared to patients with periodontitis and healthy subjects. Furthermore, hs-CRP was a negative predictor of serum and salivary MMP-9.     

基于RST-QFD-Bayes的新型装甲装备通用质量特性评价指标体系构建研究

针对新型装甲装备通用质量特性评价指标体系难以确定的问题,在明确评价指标体系构建原则的基础上,结合新型装甲装备特点,确定了通用质量特性初始评价指标及指标筛选要求,运用QFD将新型装甲装备通用质量特性需求映射为评价指标筛选要求,采用粗糙集理论(Rough Set Theory,RST)确定了指标筛选重要度,考虑到关联度的不确定性及多个专家估计值的平均值和估计值的波动程度,将贝叶斯理论引入关系矩阵的确定中,用区间数确定了关联度,进行了评价指标筛选,构建了新型装甲装备通用质量特性评价指标体系,为新型装甲装备通用质量特性评价奠定了基础。     

基于IETM的图像类装备保障数据语义标注研究

为了有效的组织、查询和浏览海量的图像类装备保障数据,分析了现有图模型图像语义标注方法的弊端,选取了装备IETM内的图像类装备保障数据信息作为图像语义标注的样本数据,并结合TF*IDF权值理论,改进了图模型语义标注方法的语义标注词选定方法,构建了基于装备IETM的图像类装备保障数据语义标注模型。实验结果表明,所提出的图像类装备保障数据语义标注模型及算法能够有效地提升图像数据信息查询的查准率与查全率,能够在一定程度上满足用户对图像类装备保障数据语义标注的需求。     

???????????????????????????о?

利用模拟装置实现了卡瓦与套管在地面上的实验，使用电测的方法测量胀卡时套管外表面的应变．由实验数据获得计算网格节点处的应变，同时利用单位咬合力作用套管的有限元结果进行数值法计算，获得卡瓦各咬合齿对套管咬合力的分布，为卡瓦的优化设计提供了可靠数据．     

A simple polymer electrolyte membrane system for enrichment of low-level tritium (3H) in environmental water samples

Tritium (³H) is an essential tracer of the Earth's water cycle; yet widespread adoption of tritium in hydrologic studies remains a challenge because of analytical barriers to quantification and detection of ³H by electrolytic pre-concentration. Here, we propose a simple tritium electrolytic enrichment system based on the use of solid polymer electrolyte membranes (PEMs) that can be used to enrich ³H in 250–3000?mL environmental water samples to a 10-mL final volume. The IAEA PEM-³H system reported here can produce high enrichment factors (>70-fold) and, importantly, removes some of the deterrents to conventional ³H enrichments methods, including the use of toxic electrolysis and neutralization chemicals, spike standards, a complex electrolysis apparatus that requires extensive cooling and temperature controls, and improves precision by eliminating the need for tracking recovery gravimetrics. Preliminary results with varying operating conditions show ³H enrichments to 70-fold and higher are feasible, spanning a wide range of tritium activities from 5 to 150 TU with a precision of ～4.5?%. Further work is needed to quantify inter-sample memory and to establish lower ³H detection limits. The IAEA PEM-³H system is open source, with 3-D CAD and design files made freely available for adoption and improvement by others.