Multivariate optimization and comparison between conventional extraction (CE) and ultrasonic-assisted extraction (UAE) of carotenoid extraction from cashew apple

Carotenoids are an essential component of cashew and can be used in pharmaceuticals, cosmetics, natural pigment, food additives, among other applications. The present work focuses on optimizing and comparing conventional and ultrasound-assisted extraction methods. Every optimization step took place with a 1:1 (w:w) mixture of yellow and red cashew apples lyophilized and ground in a cryogenic mill. A Simplex-centroid design was applied for both methods, and the solvents acetone, methanol, ethanol, and petroleum ether were evaluated. After choosing the extractor solvent, a central composite design was applied to optimize the sample mass (59–201 mg) and extraction time (6–34 min). The optimum conditions for the extractor solvent were 38% acetone, 30% ethanol, and 32% petroleum ether for CE and a mixture of 44% acetone and 56% methanol for UAE. The best experimental conditions for UAE were a sonication time of 19 min and a sample mass of 153 mg, while the CE was 23 min and 136 mg. Comparing red and yellow cashews, red cashews showed a higher carotenoid content in both methodologies. The UAE methodology was ca. 21% faster, presented a more straightforward composition of extracting solution, showed an average yield of superior carotenoid content in all samples compared to CE. Therefore, UAE has demonstrated a simple, efficient, fast, low-cost adjustment methodology and a reliable alternative for other applications involving these bioactive compounds in the studied or similar matrix.     

Nonlinear elastic constitutive relations of residually stressed composites with stiff curved fibres

Applied Mathematics and Mechanics - Mechanical models of residually stressed fibre-reinforced solids, which do not resist bending, have been developed in the literature. However, in some residually...     

黄绿色葡萄石的矿物学特征及谱学研究

葡萄石可以以板状、片状、葡萄状、肾状、放射状或块状集合体的形式产出,因其美丽的外观和特殊的晶体结构,近年来受到了学者的广泛关注。本文通过电子探针、粉晶X射线衍射仪、傅里叶变换红外光谱仪、显微拉曼光谱仪、紫外可见分光光度计等仪器对黄绿色葡萄石的成分、结构及谱学特征进行了分析与探讨。葡萄石的主要致色元素为Fe,且Fe³⁺经常取代Al³⁺占据八面体配位,Fe²⁺经常取代Ca²⁺存在于空隙中。电子探针数据表明:Fe与Al的含量变化整体呈现负相关关系,Fe与Ca的含量变化也整体呈现负相关关系,Fe含量相对较高的样品其黄绿色调加深。XRD图谱和拉曼光谱的结果表明:在葡萄石中绿帘石以包裹体的形式存在。红外光谱和拉曼光谱表明葡萄石中存在硅氧四面体和铝氧八面体两种架构,紫外可见吸收光谱揭示了葡萄石的致色机理。本文对葡萄石的矿物学特征及谱学特征进行系统分析,为后续葡萄石的进一步研究提供思路与实验数据。     

非线性玻尔兹曼方程的傅里叶谱方法

玻尔兹曼方程作为空气动理学中最基本的方程之一,是连接微观牛顿力学和宏观连续介质力学的重要桥梁.该方程描述了一个由大量粒子组成的复杂系统的非平衡态时间演化:除了基本的输运项,其最重要的特性是粒子间的相互碰撞由一个高维,非局部且非线性的积分算子来描述,从而给玻尔兹曼方程的数值求解带来非常大的挑战.在过去的二十年间,基于傅里叶级数的谱方法成为了数值求解玻尔兹曼方程的一种很受欢迎且有效的确定性算法.这主要归功于谱方法的高精度及它可以被快速傅里叶变换加速的特质.本文将回顾玻尔兹曼方程的傅里叶谱方法,具体包括方法的导出,稳定性和收敛性分析,快速算法,以及在一大类基于碰撞的空气动理学方程中的推广.     

局部分数阶拉普拉斯算子的狄利克雷问题弱解的细正则性

In this paper, we study the Holder regularity of weak solutions to the Dirichlet problem associated with the regional fractional Laplacian (-△)^αΩ on a bounded open set Ω ■R(N ≥ 2) with C^(1,1) boundary ■Ω. We prove that when f ∈ L^p(Ω), and g ∈ C(Ω), the following problem (-△)^αΩu = f in Ω, u = g on ■Ω, admits a unique weak solution u ∈ W^(α,2)(Ω) ∩ C(Ω),where p >N/2-2α and 1/2< α < 1. To solve this problem, we consider it into two special cases, i.e.,g ≡ 0 on ■Ω and f ≡ 0 in Ω. Finally, taking into account the preceding two cases, the general conclusion is drawn.     

介观电路中量子纠缠的经典对应

从量子力学诞生日起,它的经典对应(或类比)一直是物理学家关心的话题.本文以介观电路量子化的框架中,带有互感的两个介观电容-电感(LC)电路为例,首次讨论了量子纠缠的经典类比(或对应)问题.先用有序算符内的积分理论证明其互感是产生量子纠缠的源头;再推导出求解特征频率的公式,就发现它与一个经典系统的小振动频率的表达式有相似之处,该经典系统组成如下:两个墙壁各连一个相同的弹簧,两个弹簧之间接着一个滑动小车可以在光滑的桌面上运动,小车挂有一根单摆.用分析力学求此系统的小振动频率,发现与上述介观电路的特征频率形式类似,单摆的摆动会造成小车来回振动,摆、小车和弹簧的互相牵制效应反映了小车和摆的"纠缠".     

紫色球杆菌视紫红质光谱特性的机器学习研究

近年来，机器学习等人工智能技术被应用于蛋白质工程，其在蛋白质结构、功能预测、催化活性等研究中具有独特优势。在未知蛋白质结构的情况下，将蛋白质序列和功能特性与机器学习相结合，基于序列-活性关系（innovative sequence-activity relationship，ISAR）算法，将蛋白质氨基酸序列数字化，用快速傅里叶变换（fast four transform，FFT）进行预处理，再进行偏最小二乘回归建模，可在数据集较少情况下拟合得到最佳模型。通过机器学习对紫色球杆菌视紫红质（gloeobacter violaceus rhodopsin，GR）的突变体蛋白质氨基酸序列与光谱最大吸收波长进行建模，获得了最佳模型。用最佳索引LEVM760106建模得到的确定系数R² 为0.944，均方误差E为11.64。用小波变换进行的预处理，其R² 虽也约为0.944，但E大于11.64，不及FFT进行的预处理。方法较好地解决了蛋白质序列与功能特性之间的数学建模问题，在蛋白质工程中可为预测更优的突变体提供支持。