A Direct NMR Method To Measure Self-Diffusion Coefficients in Liquids by Monitoring Diffusing Molecules through One-Dimensional Imaging

Diffusion processes can be followed directly by recording one-dimensional images of a selected slice at variable intervals after selective inversion of the magnetization. The resulting diffusion coefficients of H₂O and DMSO are consistent with earlier studies at different temperatures, obtained by monitoring the attenuation of NMR signals as a function of the gradient amplitude in gradient echo sequences.     

Analysis on First-stage Ignition of n-Heptane at Low Temperatures with a Lumped Skeletal Mechanism

Two-stage ignition exists in the low-temperature combustion process of n-heptane and the first-stage ignition also shows a negative temperature coefficient(NTC) phenomenon. To study key reactions and understand chemical principles affecting the first-stage ignition of n-heptane, a lumped skeletal mechanism with 62 species is obtained based on the detailed NUIGMech1.0 mechanism using the directed relation graph method assisted by sensitivity analysis and isomer lumping. The lumped mechanism shows good performance on ignition delay time under wide conditions. The study revealed that the temperature after the first-stage ignition is higher and a larger amount of fuel is consumed at lower initial temperatures. The temperature at the first-stage ignition is relatively insensitive to the initial temperature. Further sensitivity analysis and reaction path analysis carried out based on the lumped mechanism show that the decomposition of RO₂ to produce alkene and HO₂is the most important reaction to inhibit the first-stage ignitions. The chain branching explosion closely related to the first-stage ignition will be terminated when the rate constant for the RO₂ decomposition is larger than that of the isomerization of RO₂ to produce QOOH. The NTC behavior as well as other characteristics of the first-stage ignition can be rationalized from the competition between these two reactions.     

DYNAMIC RESPONSE OF HIGH SPEED TRAIN MEETING IN OPEN AIR,MEETING IN TUNNEL AND PASSING TUNNEL1)

明线会车、隧道会车和过隧道工况下的气动压力波对高速列车的动力响应和运行安全产生很大影响,本文建立了三辆编组的高速列车动力学模型,通过数值仿真得到了列车在三种工况下的车体所受的气动力,基于数值积分分析了列车的动力响应和脱轨系数。研究发现：明线会车和隧道会车工况相比,车辆的侧向运动相反。 明线会车和过隧道时,气动载荷对列车的脱轨系数影响较小,而隧道会车时,气动载荷作用对尾车的安全性影响较大。     

Divagations about the periodic table: Boolean hypercube and quantum similarity connections

In this study, several simple aspects associated with the periodic table (PT) of the elements are commented. First, the connection of the PT with the structure of a seven-dimensional Boolean hypercube leads afterward to discuss the nature of those PT elements bearing prime atomic numbers. Second, the use of quantum similarity (QS) to obtain an alternative insight on the PT element relations will be also developed. The foundation of the second part starts admitting that any element of the PT can be attached to a schematic electronic density function, constructed with a single Gaussian function: a Gaussian atomic density function, allowing to consider the PT elements as a set of quantum objects, and permits a straightforward construction of a QS matrix. Such QS scheme can be applied to the whole PT or to any subset of it. Manipulation of the QS matrices attached to any quantum object set allows the evaluation of statistical-like values, acting as coordinates to numerically or graphically represent the chosen PT atomic element sets. © 2019 Wiley Periodicals, Inc.     

Study of γ‐Fast Neutron Attenuation and Mechanical Characteristics of Modified Concretes for Shielding and Sheltering Purposes

The study of γ‐neutrons attenuation and mechanical characteristics of modified concrete are vital and crucial parameters for the construction of civilian radiological, nuclear shielding, and/or shelters. In this work, fifteen samples of ordinary concretes with five different additives; steel fibers, polypropylene, silica fume, and fly ash, with variation of cement percentages, were prepared and used for performing the mechanical and radiation attenuation investigations. The compressive strength, tensile strength, slump test, bulk density, and water permeability were also carried out for the prepared concrete mixes. Collimated coherent beams from ⁶⁰Co and Pu‐Be fast neutron sources were used to check the radiation penetrability through the syntheized mixed concrete‐additives. Very sensitive and well calibrated gamma‐neutron pulse shape discriminating spectrometer with its electronic componenets and stilbene organic detector and 3′′ × 3′′ NaI scintillation crystal was used to measure the radiation before and after attenuation and transmission. The integrated fast neutron removal macroscopic cross section (Σ_r) and linear attenuation coefficient of total gamma rays (μ) were calculated for all the analysed concrete mixes. The results of measurements, tests, analyses and calculations are given and explained. The investigated modified concrete mixes show good workability and properties from the view point of mechanical loads and γ‐fast neutrons penetrability and resistance. These results can be used for shielding and sheltering design.     

Polymer chain diffusion in polymer blends: A theoretical interpretation based on a memory function formalism

The diffusion of polymer chains in miscible polymer blends with large dynamic asymmetry—those where the two blend components display very different segmental mobility—is not well understood yet. In the extreme case of the blend system of poly(ethylene oxide) (PEO) and poly(methyl methacrylate)(PMMA), the diffusion coefficient of PEO chains in the blend can change by more than five orders of magnitude while the segmental time scale hardly changes with respect to that of pure PEO. This behavior is not observed in blend systems with small or moderate dynamic asymmetry as, for instance, polyisoprene/poly(vinyl ethylene) blends. These two very different behaviors can be understood and quantitatively explained in a unified way in the framework of a memory function formalism, which takes into account the effect of the collective dynamics on the chain dynamics of a tagged chain. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 1239–1245     

Coupling characteristics of laterally coupled gratings with slots

Laterally-coupled ridge-waveguide distributed feedback lasers fabricated without epitaxial regrowth steps have the advantages of process simplification and low cost. We present a laterally coupled grating with slots. The slots etched between the ridge and grating area are designed to suppress the lateral diffusion of carriers and to reduce the influence of the aspect-ratio-dependent-etching effect on the grating morphology in the etching process. Moreover, the grating height in this structure can be decreased to lower the aspect ratio significantly, which is advantageous over the conventional laterally coupled ridge waveguide gratings. The effects of five main structural parameters on the coupling characteristics of gratings are studied by MODE Solutions. It is found that varying the lateral width of the grating can be used as an effective way to tune the coupling strength; narrow slots (100 nm and 300 nm) and wide ridge (2 μm-4 μm) promote the stability of grating coupling coefficient and device performance. It is important to note that the grating bottom should be fabricated precisely. The comparative study of carrier distribution and mode field distribution shows that the introduction of narrow slots can strengthen the competitive advantage and stability of the fundamental mode.     

Effect of quality control on the proliferation of the extract from Taraxacum mongolicum Hand.‐Mazz. in Lactobacillus plantarum

In recent years, the fingerprint of high‐performance liquid chromatography has been extensively applied in the identification and quality control of traditional Chinese medicine. It can be a potential protocol for assessing the authenticity, stability and consistency of traditional Chinese medicine and guaranteeing the expected biological activity. In this paper, a method using high‐performance liquid chromatography to identify and control the quality of the extract of Taraxacum mongolicum Hand.‐Mazz. (TME) was established. With this method, the correlation coefficients of the similarity of 10 batches were ≥0.994. The TME displayed a steady proliferative effect in Lactobacillus plantarum. In brief, this study successfully built a reliable, simple and efficient method to control and confirm the quality and the stability of biological activity of the TME.