Optimization of cadmium adsorption from aqueous solutions by functionalized graphene and the reversible magnetic recovery of the adsorbent using response surface methodology

Novel functionalized graphene adsorbent was prepared and characterized using different techniques. The prepared adsorbent was applied for the removal of cadmium ions from aqueous solution. A response surface methodology was used to evaluate the simple and combined effects of the various parameters, including adsorbent dosage, pH, and initial concentration. Under the optimal conditions, the cadmium removal performance of 70% was achieved. A good agreement between experimental and predicted data in this study was observed. The experimental results revealed of cadmium adsorption with high linearity follow Langmuir isotherm model with maximum adsorption capacity of 502 mg g^?1, and the adsorption data fitted well into pseudo‐second order model. Thermodynamic studies showed that adsorption process has exothermic and spontaneous nature. The recommended optimum conditions are: cadmium concentration of 970 mg L^?1, adsorbent dosage of 1 g L^?1, pH of 6.18, and T = 25 °C. The magnetic recovery of the adsorbent was performed using a magnetic surfactant to form a noncovalent magnetic functionalized graphene. After magnetic recovery of the adsorbent both components (adsorbent and magnetic surfactant) were recycled by tuning the surface charges through changing the pH of the solution. Desorption behavior studied using HNO₃ solution indicated that the adsorbent had the potential for reusability.     

Synthesis,crystal structure and magnetic properties of a new tri‐nuclear iron (II,III) complex,a precursor for the preparation of superparamagnetic Fe3O4 nanoparticles applicable in the removal of Cd2+

This study reports the structural and spectroscopic characterization of a novel metal organic compound formulated as [Fe (bpy)₃] [Fe (dipic)₂]₂.7H₂O ( 1 ) (dipic = pyridine‐2,6‐dicarboxylate and bpy = 2,2^′‐bipyridine). 1 was investigated by elemental analysis, FT‐IR spectroscopy, powder X‐ray diffraction and single crystal X‐ray diffraction (SC‐XRD), which revealed a triclinic structure of expected composition. Thermal degradation of 1 was also investigated. Complex 1 was used as a precursor to prepare superparamagnetic nanoparticles of Fe₃O₄ by thermal analysis. The obtained Fe₃O₄ was characterized by Fourier transformed infrared spectroscopy (FT‐IR), powder X‐ray diffraction (XRD) and scanning electron microscopy (SEM). Fe₃O₄ nanoparticles were used as a nano‐adsorbent to remove Cd²⁺ from water at room temperature. The results showed that this nano‐adsorbent is effective in removing Cd²⁺ from contaminated water sources, and that the maximal effectivity of adsorption occurs at pH = 6. Magnetic measurements of complex 1 and Fe₃O₄ nanoparticles at room temperature revealed paramagnetic and superparamagnetic behavior, respectively.     

溶剂去除速度对于溶剂退火薄膜相形貌的影响

以聚苯乙烯-聚4-乙烯基吡啶(PS-b-P4VP)嵌段共聚物作为研究对象,采用DMF作为退火溶剂,以原子力显微镜(AFM)和透射电子显微镜(TEM)为表征手段,研究了溶剂退火后期溶胀薄膜中溶剂的去除速度对于薄膜相形貌的影响,发现通过改变溶剂去除速度可以有效的调控薄膜中的形貌.当薄膜厚度为35 nm时,DMF的快速挥发会导致薄膜中形成以PS为分散相的反转柱状相结构,当降低溶剂的挥发速度时,薄膜中形成了以PS为分散相的环状形貌,当进一步减缓挥发速度时,薄膜中将形成台阶状的片层结构;然而当薄膜厚度为55 nm时,溶剂退火后期薄膜中形成的是以P4VP为分散相的正常柱状相结构,在相同溶剂去除速度条件下薄膜相形貌变化较小.     

Highly efficient,economic, and recyclable glutathione decorated magnetically separable nanocomposite for uranium(VI) adsorption from aqueous solution

A green and environment-friendly magnetically separable nanocomposite, glutathione@magnetite was fabricated sonochemically through the functionalization of Fe₃O₄ by glutathione which was well characterized using Fourier-transform infrared spectroscopy, ultravoilet-visible spectroscopy, scanning electron microscope, energy-dispersive X-ray spectroscopy, X-ray photoelectron spectroscopy, X-ray diffraction, thermogravimetric analysis, vibrating sample magnetometer, Brunauer-Emmett-Teller, and high-resolution transmission electron microscope. The parameters affecting adsorption including pH, temperature, contact time, initial adsorbate concentration, and adsorbent amount were optimized by batch experiments. The magnetic glutathione@magnetite was applied for the removal of uranium(VI) in water with maximum adsorption capacity found to be 333.33 mg/g in 120 min at a neutral pH at 25 °C showing high efficiency for U(VI) ions. Furthermore, adsorption results obtained from UV-vis spectroscopy were validated by inductively coupled plasma optical emission spectroscopy. The thermodynamic parameters, viz Gibbs free energy (ΔGº), standard enthalpy change (ΔHº), and standard entropy change (ΔSº) of the process were calculated using the Langmuir constants. The pseudo-second-order kinetics model is seen to be applicable for describing the uptake process using a kinetics test. Moreover, desorption studies reveals that glutathione@magnetite can be used repeatedly, and removal efficiency shows only a small decrease after six cycles. Thus, glutathione@magnetite acts as a potential adsorbent for the removal of U(VI) from the water with great adsorption performance.     

Microrobots in Brewery: Dual Magnetic/Light-Powered Hybrid Microrobots for Preventing Microbial Contamination in Beer

Yeasts play a key role in the production of alcoholic beverages by fermentation processes. However, because of their continuous growth, they commonly cause spoilage of the final product. Herein, we introduce dual magnetic/light-responsive self-propelled microrobots that can actively move in a beer sample and capture yeast cells. The presence of magnetic nanoparticles on the surface of the microrobots enables their magnetic actuation under fuel-free conditions. In addition, their photoactivity under visible-light irradiation leads to an overall enhancement of their swimming and yeast removal capabilities. It was found that after the application of the microrobots into a real unfiltered beer sample, these micromachines were able to remove almost 100 % of residual yeasts. In addition, these microrobots could also be added at the initial step of the fermentation process without altering the final beer properties, such as alcohol level, color, and pH. This work demonstrates the potential of using externally actuated microrobots as an innovative and low-cost solution for avoiding yeast spoilage in complex liquid environments, such as alcoholic beverages. Therefore, these autonomous self-propelled microrobots open new avenues for future applications in the food industry.     

冶金法生产太阳能级硅的除硼方法、技术及工艺

太阳能作为一种绿色可再生能源受到了广泛关注,而杂质去除是从冶金级硅中获得太阳能级硅所需的纯化过程,对硅基太阳能电池的制备至关重要。冶金法制备太阳能级多晶硅新工艺技术由于其能耗低、成本低和污染少等优点,成为研究开发的热点,但如何有效地去除硼是我们面临的最严峻的挑战之一。本文综述了硼的热力学和动力学性质(溶解度、扩散率、扩散系数、传质系数和活度系数)以及近年来除硼的相关课题研究(吹气、炉渣处理、等离子体处理、酸浸和溶剂精炼)。研究发现,溶剂精炼是一种很有前途的获取高纯硅的方法,硅的富集率以及硼的去除率均可达到90%以上,而添加剂能够加强硼化物的形成和析出来改进除硼工艺,且后续几乎可被完全消除,不会对精炼硅造成污染,这将更加有效除硼并增加工艺实用性。最后本文对几种除硼工艺进行了比较分析,并对冶金法的应用前景进行了展望。     

Environmental remediation by hydroxyapatite: Solid state synthesis utilizing waste chicken eggshell and adsorption experiment with Congo red dye

This study reports the adsorption efficacy of hydroxyapatite (HAp) for removing Congo Red (CR) dye from aqueous solution. HAp was synthesized utilizing chicken eggshell as a precursor of Ca source. Solid state synthesis method was implemented which comprised calcination at 950 °C (E-HAp950). XRD analysis confirmed the formation of bi-phasic HAp with 15.5% of β-TCP. Elemental composition was evaluated by XPS and EDX analysis. FESEM analysis revealed the particles are of plate and spherical shaped also confirmed by the TEM images. DLS particle size, zeta potential, BET surface area and point of zero charge were also evaluated. Adsorption efficacy of E-HAp950 for removing CR was evaluated by batch adsorption experiment. Maximum adsorption capacity (q_max) was found to be 9.64 mgg⁻¹ which was best explained by the non-linear fitting (R² = 0.98) of Langmuir isotherm. Adsorption kinetics profusely followed pseudo second order kinetic model (R² = 0.999) with q_{e (experimental)} being very much closer to q_{e (calculative)} for this model. Thus, hydroxyapatite prepared by utilizing eggshell waste through solid state method has the potential to remove toxic dyes.     

Assembled Organoruthenium(II) for Formaldehyde Decomposition and Hydrogen Production

Formaldehyde decomposition is not only an attractive method for hydrogen production, but also a potential approach for gaseous formaldehyde removal. In this research, we prepare some assembled organoruthenium through coordination reaction between Ru(p-Cymene)Cl₂ and bridge-linking ligands. It is a creative approach for Ru(p-Cymene)Cl₂ conversion into heterogeneous particles. The rigidity of bridge-linking ligand enables assembled organoruthenium to have highly ordered crystalline structure, even show clear crystal lattice with spacing of 0.19 nm. XPS shows the N−Ru bond are formed between bridge-linking ligand and Ru(p-Cymene)Cl₂. The assembled organoruthenium has high abundant active sites for formaldehyde decomposition at low temperature. The reaction rate could increase linearly with temperature and formaldehyde concentration, with a TOF of 2420 h⁻¹ at 90 °C. It is promising for gaseous formaldehyde decomposition in wet air or nitrogen. Formaldehyde conversion is up to 95 % over Ru-DAPM is 4,4′-diaminodiphenylmethane at 90 °C in air. Gaseous formaldehyde decomposition is a two-steps process under oxygen-free condition. Firstly, formaldehyde dissolve in water, and be converted into hydrogen and formic acid through formaldehyde-water shift reaction. Then intermediate formic acid will further decompose into hydrogen and carbon dioxide. We also find formaldehyde decomposition is a synergetic catalysis process of oxygen and water in moist air. Oxygen is conducive to formic acid desorption and decomposition on the active sites, so assembled organoruthenium exhibit slightly higher conversion for formaldehyde decomposition in moist air. This work proposes a distinctive method for gaseous formaldehyde decomposition in the air, which is entirely different from formaldehyde photocatalysis or thermocatalysis oxidation.     

Virus and bacterial removal ability of TiO2 nanowire-based self-supported hybrid membranes

Development and application of hybrid membranes containing multi-component materials are increasing day by day in the fields of environmental protection and water treatment. In this research, the efficiency of titania nanowire (TiO₂ NW)-based self-supported hybrid membranes was investigated in the removal of Escherichia coli (E. coli) bacteria and MS2 bacteriophages from contaminated water mimicking the microorganism suspension. Furthermore, toxicology tests on the as-prepared membranes were also performed. TiO₂ NWs were coated with iron(III) oxide (Fe₂O₃) and copper(II) oxide (CuO) nanoparticles, respectively, and cellulose was used as reinforcement material. It was found that, the functionalisation strongly affected the MS2 removal ability of as-prepared membranes, which can be due to the electrostatic interactions between the surface of hybrid membrane and the bacteriophages. The most efficient removal (greater than or equal to 99.99%) was obtained with the TiO₂ NW-CuO-cellulose membrane at pH 7.0. The fabricated hybrid membranes were characterized by micro computed tomography (μCT), Raman spectroscopy, Fourier transform infrared spectroscopy (FT-IR), dynamic light scattering (DLS), contact angle measurement and inductively coupled optical emission spectrometry (ICP-OES) techniques. This study shows a simple route of the usage of novel and effective inorganic nanowire-based hybrid membranes for bacteria and virus removal, providing new pathways in the field of water filtration technologies.     

Novel polyimides obtained from a new aromatic diamine (BAPO) containing pyridine and 1,3,4‐oxadiazole moieties for removal of Co(II) and Ni(II) ions

Novel, thermally stable polyimides (PIs) containing a 1,3,4‐oxadiazole and pyridine moieties based on a new aromatic diamine 2,5‐bis‐(aminopyridine‐2‐yl)‐1,3,4‐oxadiazole, BAPO, were synthesized. The prepared polymers were soluble in dimethysulfoxide (DMSO) and concentrated sulfuric acid at room temperature as well as in polar and aprotic solvents, such as, N‐methylpyrrolidone (NMP) and N,N‐dimethylacetamide (DMAc) at elevated temperature. Thermal behaviors of the PIs were studied by thermogravimetric analysis/dynamic thermal analysis (TGA‐DTA) and differential scanning calorimetry (DSC). The inherent viscosities of the PI solutions were in the range of 0.38–0.61 dl/g (in DMSO with a concentration of 0.125 g/dl at 25 ± 0.5°C). The removal of Co(II) and Ni(II) ions from aqueous solutions was performed using polymer 6, which was obtained from BAPO and 3,3′,4,4′‐benzophenonetetracarboxylic dianhydride (BTDA). The maximum adsorption capacity was observed for Co(II) ion at pH = 7.0 (110.4 mg g^?1, 1.87 mmol g^?1). Copyright © 2015 John Wiley & Sons, Ltd.