Effect of branched alkyl side chains on the performance of thin‐film transistors and photovoltaic cells fabricated with isoindigo‐based conjugated polymers

New isoindigo and di(thienyl)ethylene‐containing π‐extended conjugated polymers with different branched side chains were synthesized to investigate their physical properties and device performance in thin‐film transistors and photovoltaic cells. 11‐Butyltricosane (S3) and 11‐heptyltricosane (S6) groups were used as side‐chain moieties tethered to isoindigo units. The linking groups between the polymer backbone and bifurcation point in the branched side chain differ in the two polymers (i.e., PIDTE‐S3 and PIDTE‐S6 ). The polymers bearing S6 side chains showed much better charge transport behavior than those with S3 side chains. Thermally annealed PIDTE‐S6 film exhibited an outstanding hole mobility of 4.07 cm² V^?1 s^?1 under ambient conditions. Furthermore, bulk heterojunction organic photovoltaic cells made from a blend film of PIDTE‐S3 and (6,6)‐phenyl C61‐butyric acid methyl ester demonstrated promising device performance with a power conversion efficiency in the range of 4.9–5.0%. © 2015 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 2015 , 53, 1226–1234     

Polarization-enhanced bulk photovoltaic effect of BiFeO3 epitaxial film under standard solar illumination

In this Letter, we report the polarization-enhanced bulk photovoltaic effect (BPV) in pristine BiFeO₃ (BFO) epitaxial film under standard 1 sun AM 1.5 G illumination. High-quality epitaxial BFO films are grown on (001)-oriented niobium doped-SrTiO₃ substrates by pulsed laser deposition. The best BFO film based photovoltaic device achieves a power conversion efficiency of 0.0062% under standard illumination. Besides, it is found that the number of bipolar pulses plays a key role in improving the short-circuit current density and open-circuit voltage. These results are beneficial for further understanding of physical origin of the photovoltaic properties in ferroelectric oxides.     

Designing spirobifullerene core based three-dimensional cross shape acceptor materials with promising photovoltaic properties for high-efficiency organic solar cells

The development of organic electron acceptor materials is one of the key factors for realizing high-performance organic solar cells (OSCs). Nonfullerene electron acceptors, compared to traditional fullerene acceptor materials, have gained much impetus owing to their better optoelectronic tunabilities and lower cost, as well as higher stability. Therefore, 5 three-dimensional (3D) cross-shaped acceptor materials having a spirobifullerene core flanked with 2,1,3-benzothiadiazole are designed from a recently synthesized highly efficient acceptor molecule SF(BR) ₄ and are investigated in detail with regard to their use as acceptor molecules in OSCs. The density functional theory (DFT) and time-dependent DFT (TDDFT) calculations have been performed for the estimation of frontier molecular orbital (FMO) analysis, density of states analysis, reorganization energies of electron and hole, dipole moment, open-circuit voltage, photo-physical characteristics, and transition density matrix analysis. In addition, the structure-property relationship is studied, and the influence of end-capped acceptor modifications on photovoltaic, photo-physical, and electronic properties of newly selected molecules ( H1-H5 ) is calculated and compared with reference ( R ) acceptor molecule SF(BR) ₄ . The structural tailoring at terminals was found to effectively tune the FMO band gap, energy levels, absorption spectra, open-circuit voltage, reorganization energy, and binding energy value in selected molecules H1 to H5 . The 3D cross-shaped molecules H1 to H5 suppress the intermolecular aggregation in PTB7-Th blend, which leads to high efficiency of acceptor material H1 to H5 in OSCs. Consequently, better optoelectronic properties are achieved from designed molecules H1 to H5 . It is proposed that the conceptualized molecules are superior than highly efficient spirobifullerene core-based SF(BR) ₄ acceptor molecules and, thus, are recommended to experiments for future developments of highly efficient solar cells.     

Recent breakthroughs of antibacterial and antiviral protective polymeric materials during COVID-19 pandemic and after pandemic: Coating,packaging, and textile applications

The global epidemic owing to COVID-19 has generated awareness to ensuring best practices for avoiding the microorganism spread. Indeed, because of the increase in infections caused by bacteria and viruses such as SARS-CoV-2, the global demand for antimicrobial materials is growing. New technologies by using polymeric systems are of great interest. Virus transmission by contaminated surfaces leads to the spread of infectious diseases, so antimicrobial coatings are significant in this regard. Moreover, antimicrobial food packaging is beneficial to prevent the spread of microorganisms during food processing and transportation. Furthermore, antimicrobial textiles show an effective role. We aim to provide a review of prepared antimicrobial polymeric materials for use in coating, food packaging, and textile during the COVID-19 pandemic and after pandemic.     

二维钙钛矿光伏器件

有机-无机杂化卤化物钙钛矿太阳能电池(perovskite solar cells, PSCs)由于其成本低廉、制备工艺简单、光电转换率高等优点引起了越来越多的关注,在下一代半导体光伏技术中显示出巨大的发展潜力。然而PSCs器件在商业化生产应用之前,必须解决某些关键问题,例如器件在湿度、光照和过热条件下缺乏稳定性,性能会急剧衰退。层状二维(two-dimensional, 2D)钙钛矿由于其优异的环境稳定性而受到研究人员的广泛关注。通过引入不同种类的疏水性大体积有机铵阳离子可以在钙钛矿体内形成稳定的2D结构。然而,由于绝缘有机间隔阳离子的存在,使其电荷输运能力受阻并影响光电转换性能。本文根据不同种类2D钙钛矿光伏器件的发展进程,总结了影响2D钙钛矿结构和性能的关键问题,如晶体垂直取向设计、量子阱调控和有机层间隔阳离子替换工程等。最后对2D PSCs的未来发展进行展望。     

Branched plasticizers derived from eugenol via green polymerization for low/non-migration and externally/internally plasticized polyvinyl chloride materials

The synthesis of nontoxic plasticizers derived from the waste residues of the rosin-processing industry can reduce pollution and promote the high-value utilization of the waste residues of rosin. In this study, four kinds of sustainable branched plasticizers derived from a biomass resource, eugenol (derived from the waste residues of the rosin processing industry), were synthesized via one-pot solvent free polymerization and used to plasticize polyvinyl chloride (PVC). Internally plasticized PVC was fabricated using thiolated DPE (branched plasticizers based on eugenol). The thermal stability, tensile properties, microstructure, volatility behavior, and solvent extraction resistance of plasticized PVC were investigated. Compared with the behavior of the commercial plasticizer dioctyl phthalate, the thermal stability, plasticizing efficiency, and migration resistance of the branched plasticizers are superior. The acute oral toxicity dose of each branched plasticizer was extremely high at 5000 mg/kg of body weight, with no deaths among test animals. Compared with externally plasticized PVC, the internally plasticized PVC showed zero weight loss in volatility and leaching tests despite its less effective plasticization. All the branched plasticizers have potential application in plastic products.     

Photovoltaic cells involving the nonconjugated conductive polymer,iodine-doped cis-poly(isoprene)

Novel photovoltaic cells involving a nonconjugated conductive polymer have been fabricated using titanium dioxide/doped cis-1,4-poly(isoprene)/carbon on ITO coated PET substrates. Photocurrents and photo-voltages for different intensities of light (emission at 300–700 nm) have been measured. These cells have shown significantly higher photocurrents and photo-voltages compared to previous reports. A photocurrent density of about 0.27 mA/cm2 and a photo-voltage of 0.73 V have been measured for a light intensity of ～4 mW/cm².     

Synthesis,electrolyte properties and solar cell performance of hyperbranched poly(aryl-ether-urea)s

Hyperbranched poly(aryl-ether-urea)s with phenyl, N,N-dimethylamino ethyl and polyethylene oxide end-groups linked through urethane group – HBPEU-1, HBPEU-2 and HBPEU-3 respectively – were synthesized from an AB₂-type blocked isocyanate monomer and characterized by FT-IR, ¹H-NMR, SEC-MALLS, TGA and DSC techniques. The molecular weight of the polymers were found to be ranged from 4.9 × 10³ ? 1.96 × 10⁴ g/mol. The TGA results showed that the polymers decompose between 175°C – 220°C. In the DSC curves, HBPEU-1 and HBPEU-3 showed T_g at 160°C and 53°C respectively, whereas HBPEU-2 did not showed clear T_g. All the three polymers were converted into polymer electrolytes by doping with LiI/I₂. The doped polymers showed remarkably high ionic conductivity, up to 222 – 277 times compared to the un-doped polymers and the highest conductivity was observed with doped HBPEU-2. The TiO₂ based dye-sensitized solar cells (DSSCs) were fabricated using the doped polymer electrolytes and their performance was tested; HBPEU-2 showed good performance by yielding energy conversion efficiency (η) of 4.5%.     

中国战略性新兴产业国际竞争力评价

以"新钻石模型"为基础,从产业环境、产业支撑和产业创新等3个维度构建战略性新兴产业国际竞争力评价指标体系.运用2005~2014年的面板数据对战略性新兴产业进行因子分析.评价结果显示,电子及通信设备制造业与医药制造业国际竞争力明显高于计算机及办公设备制造业与医疗仪器设备及仪器仪表制造业.航空航天器及设备制造业国际竞争力有很大提升潜力.电子及通信设备制造业创新能力表现突出,但战略性新兴产业整体创新能力较低.