Direct visualization of structural defects in 2D semiconductors

Direct visualization of the structural defects in two-dimensional (2D) semiconductors at a large scale plays a significant role in understanding their electrical/optical/magnetic properties, but is challenging. Although traditional atomic resolution imaging techniques, such as transmission electron microscopy and scanning tunneling microscopy, can directly image the structural defects, they provide only local-scale information and require complex setups. Here, we develop a simple, non-invasive wet etching method to directly visualize the structural defects in 2D semiconductors at a large scale, including both point defects and grain boundaries. Utilizing this method, we extract successfully the defects density in several different types of monolayer molybdenum disulfide samples, providing key insights into the device functions. Furthermore, the etching method we developed is anisotropic and tunable, opening up opportunities to obtain exotic edge states on demand.     

离子液体溶胀对煤直接液化残渣结构及热解性能的影响

采用四种相同阴离子不同有机链长阳离子的离子液体([EMIM][MeSO_4]、[BMIM][MeSO_4]、[HMIM][MeSO_4]和[OMIM][MeSO_4])对煤直接液化残渣(DCLR)进行溶胀处理,通过SEM、FT-IR和TG-DTG表征,分析了各离子液体溶胀对煤直接液化残渣溶胀效果、表面形貌、官能团分布、主体结构和热解性能的影响。溶胀结果表明,不同链长离子液体对煤直接液化残渣具有不同的溶胀效果,[HMIM][MeSO_4]对残渣溶胀效果最好,其溶胀度高达1.78。FT-IR表明,不同链长离子液体会不同程度地破坏煤中C-H键,使得脂肪族和芳香族类化合物的相对含量有所差异。由TG-DTG可知,不同链长离子液体溶胀对残渣热解性能的影响具有较大差异,其中,以离子液体[OMIM][MeSO_4]溶胀对残渣的热解最为有利,失重率高达47.5%;而离子液体[BMIM][MeSO_4]溶胀在一定程度上抑制了残渣的热解,其失重率低于未经溶胀处理的残渣。基于Coats-Redfern法的热解动力学分析表明,煤直接液化残渣及其溶胀残渣在低温段(180-480℃)的热解过程均符合二级反应动力学,高温段(480-825℃)均以三级和四级反应动力学为宜。另外,不同链长离子液体溶胀处理明显改变了残渣的热解活化能,其链越长残渣的热解活化能越高。     

An improved evaluation of the neutron background in the PandaX-Ⅱ experiment

In dark matter direct detection experiments,neutron is a serious source of background,which can mimic the dark matter-nucleus scattering signals.In this paper,we present an improved evaluation of the neutron background in the PandaX-II dark matter experiment by a novel approach.Instead of fully relying on the Monte Carlo simulation,the overall neutron background is determined from the neutron-induced high energy signals in the data.In addition,the probability of producing a dark-matter-like background per neutron is evaluated with a complete Monte Carlo generator,where the correlated emission of neutron(s)andγ(s)in the(α,n)reactions and spontaneous fissions is taken into consideration.With this method,the neutron backgrounds in the Run 9(26-ton-day)and Run 10(28-ton-day)data sets of PandaX-II are estimated to be(0.66±0.24)and(0.47±0.25)events,respectively.     

Chemical profiling of bioactive constituents in hop cones and pellets extracts by online comprehensive two‐dimensional liquid chromatography with tandem mass spectrometry and direct infusion Fourier transform ion cyclotron resonance mass spectrometry

Humulus lupulus L. (hop) is highly interesting from a nutraceutical perspective. The hop phytocomplex contains a wide range of bioactive metabolites, and its characterization is challenging. To tackle such a task, for the first time we applied and compared a combined approach consisting of online comprehensive two‐dimensional liquid chromatography with tandem mass spectrometry and direct infusion Fourier transform ion cyclotron mass spectrometry. A reversed phase × reversed phase approach with a shifted gradient in the second dimension ensured selectivity and two‐dimensional space coverage. Hyphenation with an ion trap time‐of‐flight analyzer led to the identification of 83 compounds in 70 min, comprising a novel quercetin derivative and six unknown bitter acids. On the other hand, the direct infusion method was able to identify 40 analytes (except isomers) with high mass accuracy (≤ 0.1 ppm) in less than 1 min analysis time. The developed approach can be used in a complementary way, combining the separation capability and high informative spectra of two‐dimensional liquid chromatography tandem mass spectrometry with the ultra‐high mass accuracy of direct infusion, for potential compound discovery or the accurate profiling of bioactive compounds in different hop cultivars as well as for monitoring processing and storage of hop‐based products.     

Manufacturing of Volumetric Glass–Based Composites with Single‐ and Double‐QD Doping

Quantum dot (QD)‐based light‐emitting materials are gaining increased attention because of their easily tunable optical properties desired for various applications in biology, optoelectronics, and photonics. However, few methods can be used to manufacture volumetric materials doped with more than one type of QD other than QD‐polymer hybrids, and they often require complicated preparation processes and are prone to luminescence quenching by QD aggregation and separation from the matrix. Here, simultaneous doping of a volumetric glass‐based nanocomposite with two types of QDs is demonstrated for the first time in a single‐step process using the nanoparticle direct doping method. Glass rods doped with CdTe, CdSe/ZnS, or co‐doped with both QDs, are obtained. Photoluminescence and lifetime experiments confirm temperature‐dependent double emission with maxima at 596 and 720 nm with mean lifetimes up to 16 ns, as well as radiative energy transfer from the short wavelength–emitting QDs to the long wavelength–emitting QDs. This approach may enable the simple and cost‐efficient manufacturing of bulk materials that produce multicolor luminescence with cascade excitation pumping. Applications that could benefit from this include broadband optical fiber amplifiers, backlight systems in LCD screens, high‐power LEDs, or down‐converting solar concentrators used to increase the efficiency of solar panels.     

Efficient catalytic degradation of single and binary azo dyes by a novel triple nanocomposite of Mn3O4/Ag/SiO2

The strategy of structurally integrating noble metal and metal oxides is expected to offer exceptional opportunities toward emerging functions of all. We report the creation of an efficient hetero-structured nanocatalyst consisting of Mn₃O₄ core, SiO₂ shell impregnated with noble Ag nanoparticles. The triple nanocatalyst Mn₃O₄/Ag/SiO₂ was synthesized by using a facile three-step approach to disperse Ag nanoparticles between the surfaces of functionalized Mn₃O₄ and SiO₂. The physicochemical structural characterization was performed by XRD and FTIR. The surface morphologies were observed by SEM and TEM. The EDX measurements confirmed the composition of the composite. The nanocomposite has been used as a catalyst for the degradation of Direct blue 78 in the presence of sodium borohydride (NaBH₄). It has a drastic catalytic effect as compared to Mn₃O₄/Ag and Mn₃O₄. The rate constant of Direct blue 78 reduction followed the order: Mn₃O₄/Ag/SiO₂ (0.25166 min⁻¹) > Mn₃O₄/Ag (0.07971 min⁻¹) > Mn₃O₄ (0.00947 min⁻¹). The effects of different reaction conditions of the catalytic reaction have been determined. The catalytic activity of the as- synthesized nanocomposite was examined for the binary dyes system by incorporation of an additional dye (Sunset yellow). Its influence on the degradation rate and efficiency of Direct blue 78 was investigated. The nanocatalyst exhibited excellent catalytic activity towards the complete degradation of both the Direct blue 78 and Sunset yellow. The degradation percentage for these dyes reached 99.33 and 94.68%, respectively. The recovery and reusability of the Mn₃O₄/Ag/SiO₂ nanocomposite was studied in the reduction reaction of Direct blue 78. Five consecutive recovery reaction cycles were performed. They revealed high stability and constant efficiency of the catalyst for four cycles.     

THE DETERMINATION OF THE COMPUTATIONAL DEGREES OF FREEDOM OF BAR SYSTEMS1)

为了简化和统一结构力学教材中杆件体系计算自由度$W$的算法,本文提出了“直接法”。该方法以相邻节点间的杆件和结点为分析对象,对于含$m$根杆件、$g$ 个单刚结点和$h$个单铰结点的平面杆件体系,直接法给出计算自由度公式$W=3m-(3g+2h$)。相比于已有方法,直接法研究对象清晰,数学运算统一,适合于编程计算,便于初学者准确而快速计算复杂体系的$W$;也为结构超静定次数的确定提供了一种简单有效的数值算法。     

Controlled release of antibiotics from poly‐ε‐caprolactone/polyethylene glycol wound dressing fabricated by direct‐writing melt electrospinning

Wound dressing, which can release anti‐infectives in a controlled way, is taking an important role in the treatment and recovery of the open wound. An adequate release of antibiotics can prevent infections from microorganisms effectively. Among the new candidates of fabricating base materials for wound dressing, electrospinning fiber mats are attracting numerous attentions for their excellent performance in controlled drug delivery. The drug release behavior of electrospinning fiber mats can be tuned by changing the chemical components and the geometric structures of the mats. In this study, fiber mats with different geometric structures, which composed of poly‐ε‐caprolactone (PCL), polyethylene glycol (PEG), and ciprofloxacin (Cip) with different blending ratios, were successfully fabricated by direct‐writing melt electrospinning, and the release behavior of Cip were subsequently investigated in vitro. The results showed that the addition of PEG improved the hydrophilicity of the mats, which in turn affected the manner of drug release. The presence of PEG changed the releasing mechanism from a non‐Fickian diffusion into Fickian diffusion, which indicated that the diffusion of Cip from the composite fiber mats became the main factor of drug release instead of polymer degradation. Besides, with the same composition but different geometric structures, the drug release behavior is of significant difference. Therefore, all the Cip‐loaded composite fiber mats showed antibacterial activities but with different efficiency. In summary, the release of the drug could be controlled by adding PEG and changing the geometric structures according to the different requirement of wound dressings.     

基于有限体积虚拟区域方法的两相流动直接模拟

为提高计算效率，提出有限体积法离散下的虚拟区域颗粒两相流动直接模拟方法.在控制方程中加入相应的虚拟区域源项，保证了颗粒内部的刚体运动特性.该源项中含有颗粒信息部分及流体信息部分.在每次迭代后，对源项中的流体信息部分进行更新，从而更好地保证颗粒内速度的刚体分布.计算静止颗粒圆柱绕流及单个颗粒的沉降过程，验证了算法的准确性.     

生产率差异与企业对外直接投资进入模式选择

基于企业异质性视角,借鉴演化博弈理论探究企业通过OFDI“走出去”时的跨国并购方和标的方在全要素生产率上的差异对企业OFDI进入策略选择的影响机制。利用Hotelling模型构造资本密集型企业与劳动密集型企业OFDI进入策略选择博弈模型,讨论两类企业OFDI进入方式决策在并购双方生产率差异变化之下的变迁机理。研究发现:当并购方和被并购方生产率差异较小时,市场达到两类企业都倾向于跨国并购策略的演化稳定状态;当并购双方生产率差异较大时,企业的生产要素密集度及其结构对其OFDI进入模式决策具有重要的作用,知识或技术密集度较高的资本密集型企业与综合实力强势的部分劳动密集型企业采取跨国并购战略,而另一部分劳动密集型企业选择绿地新建方式进入国际市场。即企业OFDI进入策略选择因其所属的行业生产要素密集度及其结构不同而具有差异性。研究结论在一定程度上弥补了现有研究的不足,为以后的研究工作提供一定的理论参考。