Influence of Morphological Homogeneity of Superspherical Gold Nanoparticles on Plasmonic Photothermal Heat Generation

The plasmonic photothermal (PPT) characteristics of gold nanostructures have been extensively investigated theoretically and experimentally due to their potential for use materials science and industry. The management of the size and shape of gold nanoparticles has been a key issue in the development of better solutions for PPT heat generation because their size and shape determine their resultant photothermal properties. However, the light absorption of gold nanostructures is mainly dependent on the wavelength and orientation of the incident light; hence, maintaining uniform size and shape is critical for achieving maximum photothermal energy. Morphologically homogeneous spherical gold nanoparticles, or super gold nanospheres prepared by slowly etching uniform octahedral gold nanoparticles, demonstrate better PPT heat generation compared with commercially available nonsmooth gold nanoparticles (GNSs). The PPT heating experiments show a maximum temperature difference of 5.7 °C between the super and ordinary GNSs with the same average maximum Feret's diameters, which result from the more efficient PPT heat power generation (20.6%) of the super GNSs. In an electromagnetic‐wave simulation, the super GNSs show lower polarization dependence and a 24.6% higher absorption cross‐section than ordinary GNSs.     

A classification of orbits admitting a unique invariant measure

We consider the space of countable structures with fixed underlying set in a given countable language. We show that the number of ergodic probability measures on this space that are $S_{\infty }$-invariant and concentrated on a single isomorphism class must be zero, or one, or continuum. Further, such an isomorphism class admits a unique $S_{\infty }$-invariant probability measure precisely when the structure is highly homogeneous; by a result of Peter J. Cameron, these are the structures that are interdefinable with one of the five reducts of the rational linear order $(\mathbb{Q},<)$.     

Determination of PEGylation homogeneity of polyethylene glycol-modified canine uricase

Polyethylene glycol-modified canine uricase (PEG-UHC) was prepared by modifying the ε-amino group of lysine residues on the canine uricase (UHC) protein to near-saturation with 5 kDa monomethoxyl-polyethylene glycol succinimide (mPEG-SPA-5k). In order to accurately determine the PEGylation uniformity of PEG-UHC, CZE, 3–8% gradient gel SDS-PAGE, and imaging CIEF (iCIEF) analyses were compared. CZE could not effectively separate PEG-UHC proteins with different degrees of modification, 3–8% gradient gel SDS-PAGE could separate PEG-UHC into seven gel bands; however, most of the gel bands were smeared or blurred, and the separation of PEG-UHC samples by iCIEF was significantly better than that by 3–8% gradient gel SDS-PAGE. Under denatured conditions, iCIEF separated 12 pI peaks, and could also accurately quantify the relative monomer PEG-UHC content. More than 85% of the total monomeric PEG-UHC was conjugated with 7–12 PEG molecules; of this 85%, approximately 40% was conjugated with 9–10 PEG molecules. These results demonstrated that iCIEF exhibits good potential for determining the PEGylation homogeneity of PEGylated protein drugs.     

Radial sample load distribution under overload conditions: Analytical scale columns

The homogeneity of the sample load across the radial cross section of analytical scale columns was determined when operating under overload conditions. The study was performed using active flow technology columns operating in parallel segmentation mode. The outlet segmentation ratio was varied to enable different volume fractions of mobile phase, and thus sample, to elute from the peripheral and central flow regions of the column. The amount of solute exiting the peripheral and radial central exit ports was determined as a function of the flow segmentation ratio. The experimental data using an analytical scale column with dimensions, 100?×?4.6?mm, indicated that the sample load distribution was essentially uniform as a function of the column radial cross section.     

耐辐照玻璃成分分析标准物质的研制

采用高温熔融方法制备了玻璃成分分析标准物质.对标准物质的制备技术、均匀性检验、稳定性考察及定值不确定度进行了分析.研制的耐辐照成分分析标准物质具有良好的均匀性和稳定性,各组分不确定度均小于5％.     

Solid Particle Distribution in Centrifugal Impeller Contactors

The recently developed centrifugal impeller is examined to investigate the solid–liquid mixing in a mechanically agitated contactor. Using the sample withdrawal method, the effects of impeller geometrical parameters, impeller rotational speed (200–700 rpm), solid particle size (500–1100 µm), and solid loading (2–10 vol%) on the degree of homogeneity are studied. The axial and the radial solid concentration profiles and the minimum impeller speed for the complete homogenization are also determined. In comparison with a widely used propeller impeller, considerably higher homogeneity values in lower impeller speeds are obtained (90% homogeneity against 16% homogeneity at 200 rpm at the same conditions). Having also lower power consumption makes this a superior impeller in solid–liquid mixing processes especially in shear-sensitive systems.      

Synthesis and characterization of titanates of the formula MTiO3 (M = Mn,Fe, Co,Ni and Cd) by co-precipitation of mixed metal oxalates

When divalent metal chloride solutions of Mn, Fe, Co, Ni and Cd were mixed with potassium titanyl oxalate solution, mixed metal oxalates were obtained in the case of Fe, Co and Ni at room temperature in the pH range 1.5–3. In the case of manganese, heating was found to be necessary to induce precipitation and complete precipitation occurred at 80 °C. Mixed cadmium and titanyl oxalate precipitation was complete at a pH of 3 at room temperature. Various physico-chemical techniques were employed to characterize the as-dried oxalate precursors and the final MTiO₃ oxide powders (M = Mn, Fe, Co, Ni and Cd) obtained on thermal decomposition. All these experimental results relating to the synthesis and characterizations of MTiO₃ oxides are presented in this paper. The results suggest that the reaction of potassium titanyl oxalate and metal chloride solutions may not lead to the formation of a single molecular precursor by direct salt elimination reaction in the pH range 1.5–3.     

Review of the heats of chemisorption of gases at metals in the context of the problem of ‘Heterogeneous’ <Emphasis Type="Italic">vs.</Emphasis> ‘Homogeneous’ catalytic surfaces

A critical review of available data on the heats of chemisorption of gases at metals is given. The effect of upward technical and procedural trends on measured results is demonstrated. The results for surfaces approached to their states occurring in catalytic processes are accentuated. Several tens of chemisorbent/gas systems are considered; a number of the results are confirmed by several independent measurements. The coverage-independence of heats of chemisorption for powders, supported catalysts, components of multi-component catalysts, and films is demonstrated; the better the techniques and procedures, the closer to zero the angle between the heat-coverage function and the abscissa. The principal conclusion on surface homogeneity of stabilized surfaces is made.