铁路道床有砟-无砟过渡段动力特性的DEM-FEM耦合分析

针对铁路道床有砟-无砟过渡段的结构特点,采用离散元-有限元耦合模型分析散体道砟和无砟道床间过渡段的动力特性。散体道砟道床和无砟道床分别采用离散元方法 DEM和有限元方法 FEM模拟,而在过渡段将道砟颗粒嵌入无砟道床以增加道砟颗粒与无砟道床间的咬合力,并在离散元和有限元耦合区域实现了力学参数的传递。采用以上DEM-FEM耦合方法对有砟-无砟道床及其过渡段在列车荷载作用下的沉降过程进行了数值分析。计算结果表明,离散元方法中道砟颗粒间的力链呈现非对称梯形分布,其与有限元方法中的应力分布趋势一致;采用嵌入式道砟颗粒的方法可以增加有砟-无砟过渡段道砟间的咬合力,有效约束道砟颗粒的位移,减少有砟-无砟道床间的沉降差异。本文计算模型可以合理地分析有砟道床的力链分布以及无砟道床的应力分布,确定列车荷载下道床有砟-无砟过渡段的动力学行为。     

冲角工况下列车车轮损伤机理研究

曲线通过和蛇行运动时将会在轮轨间产生一定的冲角,为探究列车车轮在冲角工况下的损伤机理,利用JD-1轮轨模拟试验机对列车车轮进行滚动接触疲劳试验.结果表明:在冲角工况下车轮试件磨痕的不同区域存在不同的损伤机理,按损伤机理的不同可以将其分为塑性堆积区、疲劳损伤区和磨损区三个区域.在应力发生剧烈变化且应力方向由高应力区指向低应力区的区域将会出现材料的塑性堆积,并且在堆积处产生疲劳裂纹.滚动接触下的疲劳裂纹可以萌生于表面和亚表面,在较强应力作用下,车轮材料的晶粒发生了明显的细化,在横截面上呈现出纤维状组织.     

高速铁路连续箱型梁桥的动力响应与减振分析

根据列车具体的轴距和轴重,建立了和谐号动车组CRH380AL型列车简化模型;对高速铁路两跨连续梁桥采用多自由度欧拉伯努利梁单元进行主梁的模拟,并将液体黏滞阻尼器模拟为有限元阻尼单元;采用Newmark直接积分方法求解了高速列车作用下的连续梁桥运动方程,数值分析了列车车速以及液体黏滞阻尼器的阻尼系数对于高速铁路连续梁桥振动响应的影响。结果表明:黏滞阻尼器对于桥梁具有明显的减振效果,阻尼力不仅与阻尼系数有关还与列车时速有关;同一黏滞阻尼器条件下,桥梁的最大加速度并不随列车速度的增加而单调增加,而是在某些特定列车车速下桥梁的最大加速度出现了峰值,且随着黏滞阻尼器的阻尼系数增大,桥梁振动响应峰值处的最大加速度减幅不同;同一列车时速的条件下,桥梁的减振效果并不是随着阻尼系数的递增呈正比递增,而是随着阻尼系数的增大,阻尼器的减振效果增幅在减小。     

Recent breakthroughs of antibacterial and antiviral protective polymeric materials during COVID-19 pandemic and after pandemic: Coating,packaging, and textile applications

The global epidemic owing to COVID-19 has generated awareness to ensuring best practices for avoiding the microorganism spread. Indeed, because of the increase in infections caused by bacteria and viruses such as SARS-CoV-2, the global demand for antimicrobial materials is growing. New technologies by using polymeric systems are of great interest. Virus transmission by contaminated surfaces leads to the spread of infectious diseases, so antimicrobial coatings are significant in this regard. Moreover, antimicrobial food packaging is beneficial to prevent the spread of microorganisms during food processing and transportation. Furthermore, antimicrobial textiles show an effective role. We aim to provide a review of prepared antimicrobial polymeric materials for use in coating, food packaging, and textile during the COVID-19 pandemic and after pandemic.     

Branched plasticizers derived from eugenol via green polymerization for low/non-migration and externally/internally plasticized polyvinyl chloride materials

The synthesis of nontoxic plasticizers derived from the waste residues of the rosin-processing industry can reduce pollution and promote the high-value utilization of the waste residues of rosin. In this study, four kinds of sustainable branched plasticizers derived from a biomass resource, eugenol (derived from the waste residues of the rosin processing industry), were synthesized via one-pot solvent free polymerization and used to plasticize polyvinyl chloride (PVC). Internally plasticized PVC was fabricated using thiolated DPE (branched plasticizers based on eugenol). The thermal stability, tensile properties, microstructure, volatility behavior, and solvent extraction resistance of plasticized PVC were investigated. Compared with the behavior of the commercial plasticizer dioctyl phthalate, the thermal stability, plasticizing efficiency, and migration resistance of the branched plasticizers are superior. The acute oral toxicity dose of each branched plasticizer was extremely high at 5000 mg/kg of body weight, with no deaths among test animals. Compared with externally plasticized PVC, the internally plasticized PVC showed zero weight loss in volatility and leaching tests despite its less effective plasticization. All the branched plasticizers have potential application in plastic products.     

中国战略性新兴产业国际竞争力评价

以"新钻石模型"为基础,从产业环境、产业支撑和产业创新等3个维度构建战略性新兴产业国际竞争力评价指标体系.运用2005~2014年的面板数据对战略性新兴产业进行因子分析.评价结果显示,电子及通信设备制造业与医药制造业国际竞争力明显高于计算机及办公设备制造业与医疗仪器设备及仪器仪表制造业.航空航天器及设备制造业国际竞争力有很大提升潜力.电子及通信设备制造业创新能力表现突出,但战略性新兴产业整体创新能力较低.     

Co3O4/UiO-66@α-Al2O3陶瓷膜对VOCs废气的分离催化性能

以α-Al₂O₃为支撑层, UiO-66为分离层, Co₃O₄为催化层, 构建了Co₃O₄/UiO-66@α-Al₂O₃陶瓷膜.对其形貌结构进行了表征, 并研究了其对挥发性有机物(VOCs)的分离催化性能. 结果表明, 该陶瓷膜对喷涂行业废气中苯与吡啶两种主要成分体现出良好的分离性, 透过侧的气体中吡啶与苯的摩尔浓度比值可由给料侧的1提高至17; 体系中引入臭氧后, 给料侧苯的浓度明显降低, 其去除率可达到89%. 透过侧的吡啶去除率仅为27%, 得到了较大程度的保留, 剩余的吡啶经收集后可进行单独的深度处理. Co₃O₄/UiO-66@α-Al₂O₃陶瓷膜在对喷涂行业废气中苯成分高效降解的同时, 能够有效解决喷涂行业废气处理过程中氮氧化物的排放问题, 有望成为喷涂行业废气预处理工艺的理想选择.     

吊车压轨器强度的实验测试

宽厚板厂房的行车轨道在行车运行时承受来自行车水平导向轮的水平推力，该水平推力可能导致压轨器破坏，为确保压轨器的安全设计，采用平面光弹性、三维光弹性进行实验测试，分析在最不利工况下，各种压轨器所承担的水平推力份额，压轨器的变形和应力分布，给出强度分析评估，确定系统中各个压轨器以及固定螺栓的关键部位的应力水平。     

On a New Route to Chaos in Railway Dynamics

Cooperrider's mathematical model of a railway bogie running on a straight track has been thoroughly investigated due to its interesting nonlinear dynamics (see True [1] for a survey). In this article a detailed numerical investigation is made of the dynamics in a speed range, where many solutions exist, but only a couple of which are stable. One of them is a chaotic attractor.Cooperrider's bogie model is described in Section 2, and in Section 3 we explain the method of numerical investigation. In Section 4 the results are shown. The main result is that the chaotic attractor is created through a period-doubling cascade of the secondary period in an asymptotically stable quasiperiodic oscillation at decreasing speed. Several quasiperiodic windows were found in the chaotic motion.This route to chaos was first described by Franceschini [9], who discovered it in a seven-mode truncation of the plane incompressible Navier–Stokes equations. The problem investigated by Franceschini is a smooth dynamical system in contrast to the dynamics of the Cooperrider truck model. The forcing in the Cooperrider model includes a component, which has the form of a very stiff linear spring with a dead band simulating an elastic impact. The dynamics of the Cooperrider truck is therefore non-smooth.The quasiperiodic oscillation is created in a supercritical Neimark bifurcation at higher speeds from an asymmetric unstable periodic oscillation, which gains stability in the bifurcation. The bifurcating quasiperiodic solution is initially unstable, but it gains stability in a saddle-node bifurcation when the branch turns back toward lower speeds.The chaotic attractor disappears abruptly in what is conjectured to be a blue sky catastrophe, when the speed decreases further.     

两系非线性悬挂车辆的运行稳定性与分叉

本文选取两系具有滞后非线性悬挂的车辆为目标，建立其数学模型和运动微分方程，用常微分方程稳定性理论对车辆蛇行运动进行理论分析，并应用分叉理论研究了整车在蛇行失稳后的动力学行为，得出蛇行运动的分叉解及稳定判据，得到防止车辆蛇行运动的充分条件，并研究了系统参数对临界速度的影响、分叉解振幅及稳定性的影响，为车辆设计和参数选取提供依据。