Bifurcation analysis of visual angle model with anticipated time and stabilizing driving behavior

In the light of the visual angle model (VAM), an improved car-following model considering driver's visual angle, anticipated time and stabilizing driving behavior is proposed so as to investigate how the driver's behavior factors affect the stability of the traffic flow. Based on the model, linear stability analysis is performed together with bifurcation analysis, whose corresponding stability condition is highly fit to the results of the linear analysis. Furthermore, the time-dependent Ginzburg-Landau (TDGL) equation and the modified Korteweg-de Vries (mKdV) equation are derived by nonlinear analysis, and we obtain the relationship of the two equations through the comparison. Finally, parameter calibration and numerical simulation are conducted to verify the validity of the theoretical analysis, whose results are highly consistent with the theoretical analysis.     

Comprehensive performance of a ball-milled La0.5Pr0.5Fe11.4Si1.6B0.2Hy/Al magnetocaloric composite

Due to the hydrogen embrittlement effect, La(Fe,Si)₁₃-based hydrides can only exist in powder form, which limits their practical application. In this work, ductile and thermally conductive Al metal was homogeneously mixed with La_0.5Pr_0.5Fe_11.4Si_1.6B_0.2 using the ball milling method. Then hydrogenation and compactness shaping of the magnetocaloric composites were performed in one step via a sintering process under high hydrogen pressure. As the Al content reached 9 wt.%, the La_0.5Pr_0.5Fe_11.4Si_1.6B_0.2H_y/Al composite showed the mechanical behavior of a ductile material with a yield strength of ~44 MPa and an ultimate strength of 269 MPa accompanied by a pronounced improvement in thermal conductivity. Due to the ease of formation of Fe-Al-Si phases and the several micron and submicron sizes of the composite particles caused by ball milling process, the magnetic entropy change of the composites was substantially reduced to ~1.2 J/kg· K-1.5 J/kg· K at 0 T-1.5 T.     

基于改进格林元的压裂水平井动态分析方法

以建立高效的动态分析方法为出发点，以边单元作为求解点，改进传统的格林元方法，减少未知数和求解矩阵维度；并提出基于改进格林元的加密网格加密方法，保证考虑复杂裂缝网络的压裂水平井动态模拟的早期精度.退化模型与半解析解、数值模拟结果进行对比，验证本文基于加密网格的改进格林元方法的准确性和动态分析的高效性.最后进行动态响应的敏感性分析，结果表明：①格林元方法是一种高精度的动态模拟方法，将求解节点设置在网格的边上可以提高压裂水平井动态模拟的速度；②改进格林元方法的加密基于叠加原理，不需要通过插值近似，其求解精度高.在相同加密网格条件下，基于本文改进格林元方法的加密效果比有限差分加密效果更佳；③复杂裂缝导流能力、改造区渗透率提高倍数、改造区大小等参数对压裂水平井动态特征影响较大，在动态分析和参数反演时，应着重考虑这些因素的影响.     

Asymptotic behavior toward nonlinear waves for radially symmetric solutions of the multi-dimensional Burgers equation

The present paper is concerned with the asymptotic behaviors of radially symmetric solutions for the multi-dimensional Burgers equation on the exterior domain in ${\mathbb{R}}^n,n\ge 3$, where the boundary and far field conditions are prescribed. We show that in some case where the corresponding 1-D Riemann problem for the non-viscous part admits a shock wave, the solution tends toward a linear superposition of stationary and rarefaction waves as time goes to infinity, and also show the decay rate estimates. Furthermore, we improve the results on the asymptotic stability of the stationary waves which are treated in the previous papers [2], [3]. Finally, for the case of $n=3$, we give the complete classification of the asymptotic behaviors, which includes even a linear superposition of stationary and viscous shock waves.     

Hitherto-Unexplored Photodynamic Therapy of Ag2S and Enhanced Regulation Based on Polydopamine In Vitro and Vivo

Given their superior penetration depths, photosensitizers with longer absorption wavelengths present broader application prospects in photodynamic therapy (PDT). Herein, Ag₂S quantum dots were discovered, for the first time, to be capable of killing tumor cells through the photodynamic route by near-infrared light irradiation, which means relatively less excitation of the probe compared with traditional photosensitizers absorbing short wavelengths. On modification with polydopamine (PDA), PDA-Ag₂S was obtained, which showed outstanding capacity for inducing reactive oxygen species (increased by 1.69 times). With the addition of PDA, Ag₂S had more opportunities to react with surrounding O₂, which was demonstrated by typical triplet electron spin resonance (ESR) analysis. Furthermore, the PDT effects of Ag₂S and PDA-Ag₂S achieved at longer wavelengths were almost identical to the effects produced at 660 nm, which was proved by studies in vitro. PDA-Ag₂S showed distinctly better therapeutic effects than Ag₂S in experiments in vivo, which further validated the enhanced regulatory effect of PDA. Altogether, a new photosensitizer with longer absorption wavelength was developed by using the hitherto-unexplored photodynamic function of Ag₂S quantum dots, which extended and enhanced the regulatory effect originating from PDA.     

Dynamic Behaviour in Microcompartments

Compartmentalisation is recognised to be a primary step for the assembly of non-living matter towards the construction of life-like microensembles. To date, a host of hollow microcompartments with various functionalities have been widely developed. Within this respect, given that dynamic behaviour is one of the fundamental features to distinguish living ensembles from those that are non-living, the design and construction of microcompartments with various dynamic behaviours are attracting considerable interest from a wide range of research communities. Significantly, the created dynamic microcompartments could also be widely used as chassis for further bottom-up design towards building protocell models by integrating and booting up necessary biological information. Herein, strategies to install the various motility behaviours into microcompartments, including haptotaxis, chemotaxis and gravitaxis, are summarized in the anticipation of inspiring more designs towards creating various advanced active microcompartments, and contributing new techniques to the ultimate goal of constructing a basic living unit entirely from non-living components.     

Structure and Mechanical Stability of Epoxy Modified Polyurethane Foam Under Heat and Stress

A series of phenolic epoxy resin (PEP) modified polyurethane foams (PUF) were prepared via an in-situ polymerization, one step process. It was found that the epoxy modified PUF foam exhibited a perforated network structure with larger cell size, higher open cell porosity and enhanced ovality compared with pure PUF. With increasing content of PEP, the tensile strength, elongation at break and low temperature modulus of PUF decreased. A single T_g was observed for PEP modified PUF, indicating that the two component phases of the polyurethane-epoxy were miscible. With increasing PEP content, the T_g of PUF shifted slightly to higher temperature, tan δ_max dropped to lower values, and the retention value of the storage modulus at ?20 and ?10?°C increased. For pure PUF, the cell walls degraded and the structure became disordered after aging under heat and stress, while for PUF/20wt%PEP, the degradation degree was obviously reduced, and an orientation of the cells along the stress direction and a density increase was observed. During aging at 200?°C, the retention of the mechanical properties of PUF/20wt% PEP was much higher than that of pure PUF, and it showed superior stability under heat and stress, attributed to incorporation of the thermally resistant oxazolidone rings and benzene rings in the PU backbones, the highly cross-linked networks of the polyurethane-epoxy systems and the obvious orientation of the cells under stress.