A microfluidics-dispensing-printing strategy for Janus photonic crystal microspheres towards smart patterned displays

From the implementation point of view, the printable magnetic Janus colloidal photonic crystals (CPCs) microspheres are highly desirable. Herein, we developed a dispensing-printing strategy for magnetic Janus CPCs display via a microfluidics-automatic printing system. Monodisperse core/shell colloidal particles and magnetic Fe₃O₄ nanoparticles precursor serve as inks. Based on the equilibrium of three-phase interfacial tensions, Janus structure is successfully formed, followed by UV irradiation and self-assembly of colloid particle to generate magnetic Janus CPCs microspheres. Notably, this method shows distinct superiority with highly uniform Janus CPCs structure, where the TMPTA/Fe₃O₄ hemisphere is in the bottom side while CPCs hemisphere is in the top side. Thus, by using Janus CPCs microspheres with two different structural colors as pixel points, a pattern with red flower and green leaf is achieved. Moreover, 1D linear Janus CPCs pattern encapsulated by hydrogel is also fabricated. Both the color and the shape can be changed under the traction of magnets, showing great potentials in flexible smart displays. We believe this work not only offers a new feasible pathway to construct magnetic Janus CPCs patterns by a dispensing-printable fashion, but also provides new opportunities for flexible and smart displays.     

改进型单晶炉提拉系统偏心平衡研究

随着光伏行业的快速发展, 对硅单晶的品质和长晶装备的稳定性的要求也不断提高。直拉法是生产硅单晶的主要方法,通过提高单晶炉副室的高度以扩大单晶硅的生产规模。由于副室高度的大幅增加,且单晶炉提拉头质心相对于旋转轴心有一定距离,对单晶炉整体稳定性有较大影响,从而降低了单晶硅的生产质量。针对此问题,对单晶炉建立可靠的力学分析模型,采用数值仿真方法,对单晶炉整体进行动力学响应分析,计算得到副室高度增加后的单晶炉工作时中钨丝绳下端晶棒的运动规律以及最大摆动幅度,为改进设计提供依据。数值仿真分析表明提高单晶炉副室高度后,提拉头较大的质心偏心是单晶炉提拉系统发生摆动的主要原因。在此基础上提出在提拉头上添加质心调节装置,通过控制系统调节可保证提拉头质心位置在旋转轴线上以降低提拉系统的摆动。     

Highly stable dielectric frequency response of chemically synthesized Mn-substituted ZnFe2O4

The tenacity of the present study was to develop a material using an economical chemical route, having balance between magnetic and dielectric order parameters for maximum transmittance of electromagnetic waves in order to use them in shielding materials. In this context, Mn-Zn ferrites were prepared using a wet chemical based sol-gel auto-combustion technique. X-ray diffraction confirmed the pure phase formation of samples, while some impurity peaks were also present for the higher value of Mn substitution. Field emission scanning electron microscopy revealed a decrease in grain size with increasing Mn substitution. While energy dispersive X-ray spectroscopy confirmed the elemental composition of pure and Mn substituted samples, the dielectric constant, dielectric loss and tangent loss were decreased with increasing frequency and increasing Mn substitution. The complex electric modulus was found to be a function of frequency and values of complex electric modulus were increased with increasing frequency and Mn substitution. The complex impedance of RC series circuit and RC parallel circuit was also decreased with increasing both the parameters while AC conductivity was increased in the series. Dielectric frequency response was also studied for the prepared samples and the best match was found with expected results. The Nyquist and Cole-Cole plots revealed the semi-conductive behavior at higher frequency and Mn substitution also yielded the same results. The relative stability of the samples to be used as dielectric materials was also studied using Bode and Nichols plots, and a comparatively high gain margin was observed, well suitable for potential applications in electromagnetic shielding.     

梁柱简化模型在自立塔塔线体系动态响应中的适用性研究

对输电塔进行合理简化可以提高塔线体系动力学仿真的效率。本文给出自立塔梁柱简化模型的计算方法，并提出利用梁柱简化模型计算方法建立自立塔塔线体系整体模型，同时采用桁梁混合模型建立精细化塔线体系整体模型，对两种模型塔线体系静力特性及振型和固有频率等动力特性进行对比分析。以脱冰工况为例，采用生死单元技术将施加在输电线节点上的集中质量单元杀死来模拟脱冰，实现对塔线体系动力学响应的有限元模拟，研究塔线体系简化模型在动态响应中的适用性。结果表明，两种模型弯曲变形误差小，低阶的振型相同，固有频率值误差小，动力特性基本相同；脱冰工况下，自立塔节点位移和塔材内力时程曲线一致，在提高计算效率的情况下，能有效保证计算精度。     

Electro-Optical and Thermophysical Characterization of Poly (Tripropylene Glycol Di-Acrylate)/Liquid Crystal Composite Materials Prepared by Polymerization Induced Phase Separation

Abstract

This work examines the development and characterization of tripropylene glycol di-acrylate/liquid crystal E7 (TPGDA/LC E7) PDLCs composite materials (polymer-dispersed-liquid-crystals). These systems were produced by UV irradiation photopolymerization (PIPS) of a mixture of the monomer tripropylene glycol di-acrylate (TPGDA) and the liquid crystal E7 (LC E7, a mixture of three cyano-biphenyl and one cyano-terphenyl LCs), in the presence of 2?wt% (of the acrylate/E7 mixture) of a photoinitiator. Electro-optical, thermal and optical characterization was used to understand the effect of the LC concentration on the electro-optical and thermo-physical properties of these materials. Polarizing optical microscopy (POM) and differential scanning calorimetry (DSC) studies were performed to observe the system morphology and to determine the transition temperatures of these materials, both as a function of their composition. The findings showed a slight variation of the nematic-isotropic transition temperature, T_NI, of the LC E7 and of the glass transition temperature, T_g, of the TPGDA polymeric matrix as a function of the mass percentage of the LC E7. A very good electro-optical response for the composition 30/70?wt % TPGDA/LC E7 was obtained.     

Facet-dependent antibacterial activity of Au nanocrystals

Engineered nanomaterials have attracted significantly attention as one of the most promising antimicrobial agents for against multidrug resistant infections. The toxicological responses of nanomaterials are closely related to their physicochemical properties, and establishment of a structure-activity relationship for nanomaterials at the nano-bio interface is of great significance for deep understanding antibacterial toxicity mechanisms of nanomaterials and designing safer antibacterial nanomaterials. In this study, the antibacterial behaviors of well-defined crystallographic facets of a series of Au nanocrystals, including {100}-facet cubes, {110}-facet rhombic dodecahedra, {111}-facet octahedra, {221}-facet trisoctahedra and {720}-facet concave cubes, was investigated, using the model bacteria Staphylococcus aureus. We find that Au nanocrystals display substantial facet-dependent antibacterial activities. The low-index facets of cubes, octahedra, and rhombic dodecahedra show considerable antibacterial activity, whereas the high-index facets of trisoctahedra and concave cubes remained inert under biological conditions. This result is in stark contrast to the previous paradigm that the high-index facets were considered to have higher bioactivity as compared with low-index facets. The antibacterial mechanism studies have shown that the facet-dependent antibacterial behaviors of Au nanocrystals are mainly caused by differential bacterial membrane damage as well as inhibition of cellular enzymatic activity and energy metabolism. The faceted Au nanocrystals are unique in that they do not induce generation of reactive oxygen species, as validated for most antibiotics and antimicrobial nanostructures. Our findings may provide a deeper understanding of facet-dependent toxicological responses and suggest the complexities of the nanomaterial-cell interactions, shedding some light on the development of high performance Au nanomaterials-based antibacterial therapeutics.     

Bogdanov-Takens Bifurcation in a Host-parasitoid Model

In this paper, we study a host-parasitoid model with Holling II Functional response, where we focus on a special case: the carrying capacity K2 for parasitoids is equal to a critical value r 1η. It is shown that the model can undergo Bogdanov-Takens bifurcation. The approximate expressions for saddle-node, Homoclinic and Hopf bifurcation curves are calculated. Numerical simulations, including bifurcation diagrams and corresponding phase portraits, are also given to illustrate the theoretical results.     

Theoretical investigation of the crystallographic structure,anisotropic elastic response,and electronic properties of the major borides in Ni-based superalloys

ABSTRACT

In Ni-based superalloys, it is usually found that borides can strengthen the grain boundaries, thereby resulting in an increase in mechanical strength and high-temperature creep properties. Due to their importance and prevalence in Ni-based superalloys, this study employs first-principles methods to investigate the crystallographic structure, anisotropic elastic response, and electronic properties of the major borides, such as M₂B, M₅B₃ and M₃B₂ (M: Cr, Mo, W), respectively, which is necessary for the assessment of complex mechanical responses of Ni-based superalloys. The results demonstrate that the studied borides are all thermodynamically and mechanically stable. Among the M _x B _y binary borides analysed, Cr _x B _y exhibits the largest shear modulus, Young’s modulus, and Vicker hardness values, and these properties increase with the increase of B contents. The studied borides display nearly isotropic elastic properties except for W₅B₃ and W₃B₂. The electronic structure analysis of M _x B _y shows that the strong hybridisation between M-d and B-p orbitals leads to these borides exhibiting higher theoretical hardness, and the overlapping peaks of M-d and B-p orbitals move to a lower energy area with the increase of B contents, which leads to the increase of shear and Young’s moduli of M _x B _y . Furthermore, for M₃B₂ borides, the Cr-B bonds and Cr–Cr bonds are much stronger than the W-B & Mo-B bonds, and W-W & Mo-Mo bonds, respectively, which leads to Cr _x B _y yielding the largest values of elastic moduli.     

The production of enantiomerically pure 1-phenylethanol by enzymatic kinetic resolution method using response surface methodology

As the enantiomers of 1-phenylethanol are valuable intermediates in several industries, the lipase catalyzed kinetic resolution of (R,S) -1-phenylethanol is a relevant research topic. In this study, the goal was to determine the optimum reaction parameters to produce enantiomerically pure 1-phenylethanol by lipase (Novozyme 435) catalyzed kinetic resolution using response surface methodology (RSM). Reactions were performed with 40–400 mM (R,S)-1-phenylethanol, 120–1200 mM vinyl acetate and 2–22 mg/mL biocatalyst concentrations (BC _L ), at 20–60 °C and with a stirring rate of 50–400 rpm for 5–120 min. The samples were analyzed using high performance liquid chromatography (HPLC) with a Chiralcel OB column. Optimum reaction parameters to reach 100% enantiomeric excess for the substrate ( ee _s ) were determined as follows: substrate concentration (C _s ): 240 mM, BC _L : 11 mg/mL, at 42 °C with a reaction time of 75 min. Model validation was performed using these conditions and ee _s was calculated as 100%, which indicates the predicted model was efficient and accurate. When compared to the literature, it was observed that the reaction time decreased significantly. This is an important result considering the industrial scale perspective.