砂土串囊式充气锚杆承载力的研究

在砂土地层中,串囊式充气锚杆的研究还比较少,其承载特性及受力机理尚不明确。本文基于莫尔-库仑模型和Vesic圆孔扩张理论法,分别对圆柱体、球体、组合体、椭球体假设下的串囊式充气锚杆的扩大段进行计算分析。并将计算结果与试验得到的实测值进行对比。结果表明:四种形状假设中椭球体的形状假设理论值与实测值的误差最小,仅为8.35%。通过拟合试验数据,并引入与端阻力和侧摩阻力有关的两个系数对承载力公式进行修正,得到了抗拔承载力的经验公式。     

Modifying the physicochemical properties,solubility and foaming capacity of milk proteins by ultrasound-assisted alkaline pH-shifting treatment

This study investigated the effects of different treatment of alkaline pH-shifting on milk protein concentrate (MPC), micellar casein concentrate (MCC) and whey protein isolate (WPI) assisted by the same ultrasound conditions, including changes in the physicochemical properties, solubility and foaming capacity. The solubility of milk proteins had a significant increase with gradual enhancement of ultrasound-assisted alkaline pH-shifting (p < 0.05), especially for MCC up to 99.50 %. Also, treatment made a significant decline in the particle size of MPC and MCC, as well as the turbidity of the proteins (p < 0.05). The foaming capacity of MPC, MCC, and WPI was all improved, especially at pH 11, and at this pH, the milk protein also showed the highest surface hydrophobicity. The best foaming capacity at pH 11 was the result of the combined effect of particle size, potential, protein conformation, solubility, and surface hydrophobicity. In conclusion, ultrasound-assisted pH-shifting treatment was found to be effective in improving the physicochemical properties and solubility and foaming capacity of milk proteins, especially MCC, with promising application prospect in food industry.     

区域小微企业群体大规模客户化制造系统模块化组建研究

为提升组建效率,降低组建难度与成本,在分析区域小微企业及其群体特点的基础上,提出由小微企业构建产品制造模块,通过模块的组合,形成大规模客户化制造系统的模块化组建方法.同时,结合对产品制造模块及其构建方式,以及模块选择主要影响因素的分析,研究了基于模块选择系数的制造模块选择策略,为制造系统的模块化组建提供了必要条件.     

Effect of gravity on the mechanical properties of lunar regolith tested using a low gravity simulation device

Simulations of the bearing capacity and shear strength of regolith under Earth’s gravity produce different results from those under low gravity. A low-gravity simulation device was developed in this study, and an internal stress model of regolith simulant was established to correct the errors. The model revealed additional force on both shear plane in the shear test and the press plate area in the pressure–sinkage test. The sinkage and shear test results showed that low gravity decreased the deformable index n, frictional modulus k_φ and cohesion c, whereas there were no obvious changes to the cohesive modulus k_c and internal friction angle φ. The sinkage generally increased as the gravity decreased under a consistent normal load larger than 50 N, but when the wheel load was lower than 50 N, the sinkage of the TYII-1 simulant was larger under 1 G than 1/6 G. Gravity had little effect on the shear strength of the regolith. However, the tractive thrust of the TYII-1 simulant was lower under 1/6 G than 1 G. The smaller difference was due to differences in the way the soils responded to changes in the gravity level for the TYII-2 simulant.     

Reduced Graphene‐Wrapped MnO2 Nanowires Self‐Inserted with Co3O4 Nanocages: Remarkable Enhanced Performances for Lithium‐Ion Anode Applications

A simple synthetic approach for graphene‐templated nanostructured MnO₂ nanowires self‐inserted with Co₃O₄ nanocages is proposed in this work. The Co₃O₄ nanocages were penetrated in situ by MnO₂ nanowires. As an anode, the as‐obtained MnO₂–Co₃O₄–RGO composite exhibits remarkable enhanced performance compared with the MnO₂–RGO and Co₃O₄–RGO samples. The MnO₂–Co₃O₄–RGO electrode delivers a reversible capacity of up to 577.4 mA h g^?1 after 400 cycles at 500 mA g^?1 and the Coulombic efficiency of MnO₂–Co₃O₄–RGO is about 96 %.     

Addition of SiO2 to the operation of a polyimide cathode in a sodium battery

The effect of the addition of SiO₂ nanoparticles on the properties of a polyimide cathode was explored by CV, XPS, and galvanostatic cycling methods. The capacity and average cycling potential of the cell increased in the presence of SiO₂. By quantum chemical modeling, it was shown that SiO₂ nanoparticles served as a framework for polyimide, which retained its fixed structure upon metalation with sodium.     

输电铁塔四地脚螺栓塔脚板抗拉承载力试验与计算方法研究

针对架空输电线路铁塔中常用的四地脚螺栓塔脚板进行了抗拉承载力试验和理论计算方法研究。首先,选取8个试件进行塔脚板抗拉承载力试验研究,分析塔脚底板板厚及有无加劲板对塔脚板抗拉承载力的影响;其次,通过有限元模拟塔脚板的应力分布情况,并结合“塑性分析,弹性设计”的思想,提出了一种基于屈服线理论的四地脚螺栓塔脚板抗拉承载力计算公式;最后,与试验结果、有限元仿真结果、已有技术规定中的计算结果进行了对比。结果表明:建议公式与试验结果和仿真结果较为吻合,相关技术规定中的计算结果偏于保守,验证了本文建议公式的精确性;底板厚度和加劲板的作用对塔脚板承载力影响较大。研究结果可为输电铁塔四地脚螺栓塔脚板结构设计提供参考。     

Pitch-Based Laminated Carbon Formed by Pressure Driving at Low Temperature as High-Capacity Anodes for Lithium Energy Storage Systems

Pitch has been used to prepare electrodes by high-temperature heat treatments for supercapacitors, lithium-ion batteries, on account of its rich aromatic ring structure. Here, the toluene-soluble component of pitch is used to prepare a kind of laminated carbon. This was realized by a template-free synthesis at low temperature with the addition of pressure. The toluene-soluble component has a small molecular weight, which makes the thermal deformation ability stronger and then enhances the orientation of the carbon layer with the help of pressure. The prepared anode exhibits a splendid electrochemical performance compared with the traditional graphite anode. A high stable capacity of approximately 550 mAh g⁻¹ at 50 mA g⁻¹, which is much higher than graphite (372 mAh g⁻¹), is obtained. Also, when the current density is up to 2 A g⁻¹, the capacity is about 150 mAh g⁻¹. Surprisingly, it also delivers a superior cycling performance. And when used as the anode/cathode electrode for lithium-ion capacitors, a high energy density can be obtained. The present work offers an opportunity to utilize the pitch source in lithium energy storage with promising cycle life, high energy/power density, and low cost.     

Oleogels—Their Applicability and Methods of Characterization

Oleogels or, more precisely, non-triglyceride structured lipid phases have been researched excessively in the last decade. Yet, no comprehensive knowledge base has emerged, allowing technology elevation from the laboratory bench into the industrial food application. That is partly due to insufficient characterization of the structuring systems studied. Examining a single composition decided upon by arbitrary methods does not stimulate progress in the research and technology area. A framework that gives much better guidance to product applications can easily be derived. For example, the incremental structure contribution concept is advocated as a parameter to compare the potency of structuring systems. These can straightforwardly be determined by combining solubility data and structural measurements in the recommended manner. The current method to determine the oil-binding capacity suffers from reproducibility and relevance. A newly developed method is suggested to overcome these shortcomings. The recommended new characterization of oleogels should contribute to a more comprehensive knowledge base necessary for product innovations.     

Metabolomics techniques applied in the investigation of phenolic acids from the agro-industrial by-product of Carapa guianensis Aubl

Processing of Carapa guianensis seeds to obtain oil on an industrial scale generates a significant amount of by-product, approximately 66% w/w, which is called cake and is a potential source of biomolecules, including simple phenolic structures. For this reason, studies were carried out on the chemical profiles of hydrolyzed extract from this agro-industrial by-product through High Performance Thin-Layer Chromatography (HPTLC) and Gas Chromatography coupled to Mass Spectrometry (GC–MS). These techniques were used to detect metabolic classes and/or groups, and to identify, for the first time, thirteen simple phenolic acids in this by-product. The sample antioxidant capacity was determined by methods of 2,2-diphenyl-1-picrylhydrazyl (DPPH)and 2,2′-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) diammonium salt (ABTS⁺) radicals direct sequestration. The hydrolyzed fraction showed a total of 63.47% in the relative abundance of the total of compounds, standing out: p-hydroxybenzoic acid (39.19%) and protocatechuic acid (3,4-dihydroxybenzoic acid) (5.62%), both from hydroxybenzoic acids and 3-(3,4-dihydroxyphenyl)lactic acid, (7.76%) hydroxycinnamic acids derivatives. In these results, the fraction rich in simple phenolic acids was obtained, attributing the prominent behavior of this matrix antioxidant activity, expressed by (IC₅₀: of 16.42 µg/mL and 6.52 µg/mL for DPPH and ABTS⁺ radicals, respectively). The research demonstrated an alternative to applicability that involves sustainability from agro-industrial. These techniques were used to detect metabolic classes and/or groups, and to identify, for the first time, thirteen simple phenolic acids in this by-product, generating a process capable of converting biomass into a bioproduct, consisting of bioactive compounds, in addition to adding value to the industrial chain.