An improved LC–MS/MS method for determination of docetaxel and its application to population pharmacokinetic study in Chinese cancer patients

Because of its unpredictable side effects and efficacy, the anticancer drug docetaxel (DTX) requires improved characterisation of its pharmacokinetic profiles through population pharmacokinetic studies. A sensitive and rugged LC–MS/MS method for the detection of DTX in human plasma was developed and optimised using paclitaxel as an internal standard (IS). The plasma samples underwent rapid extraction using hybrid solid-phase extraction-protein precipitation. The analyte and IS were separated with an isocratic system on a Zorbax Eclipse Plus C₁₈ column using water containing 0.05% acetic acid along with 20 μM of sodium acetate and methanol (30/70, v/v) as the mobile phase. Quantification was performed using a triple quadrupole mass spectrometer through multiple reaction monitoring in positive mode, using the m/z 830.3 → 548.8 and m/z 876.3 → 307.7 transitions for DTX and paclitaxel, respectively. The range of the calibration curve was 1–500 ng/mL for DTX, and the linear correlation coefficient was >0.99. The accuracies ranged from −4.6 to 4.2%, and the precision was no higher than 7.0% for the analytes. No significant matrix effect was observed. Both DTX and the IS showed considerable recovery. This method was finally applied to the establishment of a population pharmacokinetic model to optimise the clinical use of DTX.     

Above,below, and in‐between the two glass transitions of ultrathin free‐standing polystyrene films: Thermal expansion coefficient and physical aging

In previous work we observed two simultaneous transitions in high molecular weight (MW) free‐standing polystyrene films that were interpreted as two thickness‐dependent reduced glass transition temperatures (T_gs). The weaker lower transition agreed well with the MW‐dependent T_g(h) previously reported, while the much stronger upper transition matched the MW‐independent T_g(h) previously observed in low‐MW free‐standing films. Here, we investigate the nature of these two transitions by inspecting the temperature dependence of the films' thermal coefficient of expansion (TCE) and present physical aging measurements using ellipsometry both below and in‐between the two transitions. TCE values indicate approximately 80 to 90% of the film solidifies at the upper transition, while only 10 to 20% remains mobile to lower temperatures, freezing out at the lower transition. Physical aging is observed at a temperature below the upper transition, but above the lower transition, indicative of the upper transition being an actual glass transition associated with the α‐relaxation. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 64–75     

A sufficient condition for stability using slopes of isoclines in planar mappings

Coupled planar maps are often parameter dependent, with the stability of their fixed points depending on the values of the parameters chosen. As the magnitude of the eigenvalues is difficult to determine when the number of parameters is large, one commonly uses instead the Jury conditions for the Jacobian, but even this can present difficulties. In this paper, we will show a simpler sufficient criteria for local asymptotic stability that follows by comparing slopes of isoclines.     

Analytical and numerical studies of the boundary slip in the immersed boundary‐thermal lattice Boltzmann method

We analytically and numerically investigate the boundary slip, including the velocity slip and the temperature jump, in immersed boundary‐thermal lattice Boltzmann methods (IB‐TLBMs) with the two‐relaxation‐time collision operator. We derive the theoretical equation for the relaxation parameters considering the effect of the advection velocity on the temperature jump of the IB‐TLBMs. The analytical and numerical solutions demonstrate that the proposed iterative correction methods without the computational cost of the sparse matrix solver reduce the boundary slip and boundary‐value deviation as effectively as the implicit correction method for any relaxation time. Because the commonly used multi‐direct forcing method does not consider the contributions of the body force to the momentum flux, it cannot completely eliminate the boundary slip because of the numerical instability for a long relaxation time. Both types of proposed iterative correction methods are more numerically stable than the implicit correction method. In simulations of flow past a circular cylinder and of natural convection, the present iterative correction methods yield adequate results without the errors of the velocity slip, the temperature jump, and the boundary‐value deviation for any relaxation time parameters and for any number of Lagrangian points per length. The combination of the present methods and the two‐relaxation‐time collision operator is suitable for simulating fluid flow with thermal convection in the multiblock method in which the relaxation time increases in inverse proportion to the grid size.     

三乙四胺钴配合物氧合结构和老化机理

以固相法合成的三乙四胺钴配合物为研究体系,采用正离子电喷雾串联质谱、紫外-可见吸收光谱、拉曼共振光谱和红外光谱等表征手段,研究了配合物与氧分子的相互作用过程及配合物在吸氧过程中的结构变化。结果表明,三乙四胺钴配合物的吸氧过程是一个动态的变化过程,氧合产物由双氧双桥联的氧合配合物CoⅢL-(O2)2-CoⅢL形式向双羟基桥联的老化配合物CoⅢL-(OH)2-CoⅢL形式转变;18O2同位素标记实验验证了Co-O-O-Co的存在。酸解实验说明OH桥联配合物的形成是造成可逆性差的根本原因。这些结果为探知多胺钴配合物的氧合结构和老化机理提供了新的研究方法和实验依据。     

Cu-SSZ-13/堇青石整体式催化剂的原位合成及其NH3选择性催化还原NO性能

采用水热合成技术,在堇青石蜂窝陶瓷载体上原位合成了SSZ-13分子筛,并借助X射线衍射（XRD）和场发射扫描电子显微镜（FESEM）等手段对其进行表征.在此基础上,研究了合成时间对催化剂结构和机械性能的影响.另外,使用固定床反应器测试了离子交换度为50%的Cu-SSZ-13/堇青石催化剂和Cu-SSZ-13催化剂水热老化前后的氨气选择性催化还原（NH₃-SCR）NO性能.结果表明,通过原位合成法制备的Cu-SSZ-13/堇青石催化剂在200-500°C的窗口温度内能达到80%以上的转化率,并在300°C时达到96.4%的转化率.在850°C水热老化12 h后,Cu-SSZ-13催化剂完全丧失了催化性能,而Cu-SSZ-13/堇青石催化剂在300°C时仍然保持91%的转化率.使用XRD和固体27Al核磁共振(²⁷Al NMR)的方法,研究了水热老化前后两种催化剂结构的变化,结果表明,当水热老化12 h后,Cu-SSZ-13基本丧失了SSZ-13结构特征峰,而Cu-SSZ-13/堇青石仍然保持了一定的SSZ-13骨架结构.证明了通过原位合成法制备的Cu-SSZ-13/堇青石催化剂具有较好的抗水热老化性能.     

废旧橡胶改性沥青的老化研究现状

废旧橡胶改性沥青可显著延长路面寿命。本文综述了国内外废旧橡胶改性沥青的热氧老化、紫外老化和水老化行为,使用宏观性能和微观结构变化分析了橡胶改性沥青老化特点。橡胶改性沥青在热、氧、紫外、水的作用下发生老化,软化点升高,针入度降低,羰基含量增加。特别是光、氧老化对经过水老化后的橡胶改性沥青老化作用尤为明显,水溶解了部分老化产物促进了沥青的老化。目前对于橡胶改性沥青老化过程中胶粉、沥青的结构性能变化和其环境耦合因素对橡胶改性沥青的老化研究及分析手段还很少,在今后的研究中须引起重视。     

Genetic diversity and haplotype structure of 21 Y‐STRs,including nine noncore loci,in South Tunisian Population: Forensic relevance

Y chromosome STRs (Y‐STRs) are being used frequently in forensic laboratories. Previous studies of Y‐STR polymorphisms in different groups of the Tunisian population identified low levels of diversity and discrimination capacity (DC) using various commercial marker sets. This definitely limits the use of such systems for Y‐STRs genotyping in Tunisia. In our investigation on South Tunisia, 200 unrelated males were typed for the 12 conventional Y‐STRs included in the PowerPlex® Y System. Additional set of nine noncore Y‐STRs including DYS446, DYS456, DYS458, DYS388, DYS444, DYS445, DYS449, DYS710, and DYS464 markers were genotyped and evaluated for their potential in improving DC. Allele frequency, gene diversity, haplotype diversity (HD), and DC calculation revealed that DYS464 was the most diverse marker followed by DYS710 and DYS449 markers. The standard panel of 12 Y‐STRs (DC = 80.5%) and the nine markers were combined to obtain DC of 99%. Among the 198 different haplotypes observed, 196 haplotypes were unique (HD = 99.999). Out of the nine noncore set, six Y‐STRs (DYS458, DYS456, DYS449, DYS710, DYS444, and DYS464) had the greatest impact on enhancing DC. Our data provided putative Y‐STRs combination to be used for genetic and forensic applications.     

基于离子液体的超级电容在3 V及65 oC老化条件下的铝碳界面效应

相比于传统乙腈电解液体系的超级电容器,离子液体基超级电容器具有工作窗口电压高,能量密度大,不可燃等优点,适用于碳中和时代清洁但不稳定电力领域的大规模储能。然而,目前的工作主要集中在对纽扣型离子液体-超级电容器的研究上,有关软包式离子液体-超级电容器的长循环寿命评测的报道较少。构建可靠的超级电容器用于长时间测试或在高温下开展加速老化测试,应考虑集流体/电极界面的良好接触,以最小化电荷转移电阻。本文以包覆不同碳层的泡沫铝为集流体,研究了超级电容器新系统中的碳-铝界面效应。通过环氧树脂薄膜碳化得到的均匀无定形碳层,相比通过PVDF粘附石墨烯碳层,赋予了铝相和碳相更强的相互作用。此外,为了充分挖掘大离子尺寸的离子液体电解液的潜力,本文采用介孔碳电极实现离子在介孔间的快速扩散。因此,本工作首次制备了由介孔碳电极、离子液体电解液和覆碳三维泡沫铝集流体组成的新结构软包式超级电容器。以自制的容量为37 F的不同软包式超级电容器件,通过3 V、65 ^oC、500 h加速老化试验,研究了其时间依赖性的电化学性能,包括CV测试、恒流充放电测试、电容值、接触电阻、电化学阻抗谱等。相比石墨烯包覆的泡沫铝基器件,无定形碳层包覆的泡沫铝基器件表现出更高的电容保持率。此外,我们还对ESR进行了等效电路拟合,并深入分析了接触电阻、电荷转移电阻、韦伯电阻,研究了C-Al界面对高能量密度超级电容器的高性能和稳定性的影响。500小时老化测试前后的极片表征证实了上述结果。高温、高压条件使粘附石墨烯碳层的泡沫铝界面结构不可靠。而泡沫铝表面原位包覆的碳层在老化过程中表现出较强的相互作用和稳定的结构。这些坚实的数据为面向高能量密度、高功率密度和长循环寿命,进一步优化高窗口电压超级电容器提供了充足的信息。