Zero dissipation limit to rarefaction wave with vacuum for the one-dimensional non-isentropic micropolar equations

The zero dissipation limit of the one-dimensional non-isentropic micropolar equations is studied in this paper. If the given rarefaction wave which connects to vacuum at one side, a sequence of solution to the micropolar equations can be constructed which converge to the above rarefaction wave with vacuum as the viscosity and the heat conduction coefficient tend to zero. Moreover, the uniform convergence rate is obtained. The key point in our analysis is how to control the degeneracies in the vacuum region in the zero dissipation limit process.     

Low percolation conductive graphite flakes-filled poly(urethane-imide) composites with high thermal stability via imidization self-foaming structure

In the study, the conductive graphite flakes filled poly(urethane-imide) composites (PUI/GFs) with high performance were constructed by the thermal imidization self-foaming reaction. It was found that the foaming action could promote the redistribution of GFs during curing process and the formation of stable linear conductive pathways. The percolation threshold of PUI/GFs composites was lowered from 1.26 wt% (2000 mesh GFs) or 0.86 wt% (1000 mesh GFs) to 0.79 wt% (500 mesh GFs), which were relatively low percolation thresholds for polymer/GFs composites so far. When the content of 500 mesh GFs was 4.0 wt%, the electrical conductivity of the composite was as high as 3.96 × 10^?1 S/m. Also, a poly(urethane-imide) (PUI) matrix with excellent thermal stability (T_d10%: 334.97 °C) and mechanical properties (elongation at break: 324.52%, tensile strength: 15.88 MPa) was obtained by introducing the rigid aromatic heterocycle into the polyurethane (PU) hard segments. Moreover, the zero temperature coefficient of resistivity for the composites was observed at the temperature range from 30 °C to 200 °C. Consequently, PUI/GFs composites may provide the novel strategy for considerable conductive materials with high thermal stability in electrical conductivity.     

Influence of long-chain branches in polyethylenes on linear viscoelastic flow properties in shear

 This contribution presents a survey on the influence of long-chain branching on the linear viscoelastic properties zero shear-rate viscosity and steady-state recoverable compliance of polyethylene melts. The materials chosen are linear and slightly long-chain branched metallocene-catalyzed polyethylenes of narrow molecular mass distribution as well as linear and highly long-chain branched polyethylenes of broad molecular mass distribution. The linear viscoelastic flow properties are determined in shear creep and recovery experiments by means of a magnetic bearing torsional creep apparatus. The analysis of the molecular structure of the polyethylenes is performed by a coupled size exclusion chromatography and multi-angle laser light scattering device. Polyethylenes with a slight degree of long-chain branching exhibit a surprisingly high zero shear-rate viscosity in comparison to linear polyethylenes whereas the highly branched polyethylenes have a much lower viscosity compared to linear samples. Slightly branched polyethylenes have got a higher steady-state compliance in comparison to linear products of similar polydispersity, whereas the highly branched polyethylenes of broad molecular mass distribution exhibit a surprisingly low elasticity in comparison to linear polyethylenes of broad molecular mass distribution. In addition sparse levels of long-chain branching cause a different time dependence in comparison to linear polyethylenes. The experimental findings are interpreted by comparison with rheological results from literature on model branched polymers of different molecular topography and chemical composition. Received: 12 July 2001 Accepted: 30 October 2001     

Explicit Solutions of Quadratic FBSDEs Arising From Quadratic Term Structure Models

We provide explicit solutions of certain forward-backward stochastic differential equations (FBSDEs) with quadratic growth. These particular FBSDEs are associated with quadratic term structure models of interest rates and characterize the zero-coupon bond price. The results of this paper are naturally related to similar results on affine term structure models of Hyndman (Math. Financ. Econ. 2(2):107–128, 2009) due to the relationship between quadratic functionals of Gaussian processes and linear functionals of affine processes. Similar to the affine case a sufficient condition for the explicit solutions to hold is the solvability in a fixed interval of Riccati-type ordinary differential equations. However, in contrast to the affine case, these Riccati equations are easily associated with those occurring in linear-quadratic control problems. We also consider quadratic models for a risky asset price and characterize the futures price and forward price of the asset in terms of similar FBSDEs. An example is considered, using an approach based on stochastic flows that is related to the FBSDE approach, to further emphasize the parallels between the affine and quadratic models. An appendix discusses solvability and explicit solutions of the Riccati equations.     

Zero sets of bivariate Hermite polynomials

We establish various properties for the zero sets of three families of bivariate Hermite polynomials. Special emphasis is given to those bivariate orthogonal polynomials introduced by Hermite by means of a Rodrigues type formula related to a general positive definite quadratic form. For this family we prove that the zero set of the polynomial of total degree n+m$n+m$ consists of exactly n+m$n+m$ disjoint branches and possesses n+m$n+m$ asymptotes. A natural extension of the notion of interlacing is introduced and it is proved that the zero sets of the family under discussion obey this property. The results show that the properties of the zero sets, considered as affine algebraic curves in R²${\mathbb{R}}^2$, are completely different for the three families analyzed.     

Dependence of the zero shear-rate viscosity and the viscosity function of linear high-density polyethylenes on the mass-average molar mass and polydispersity

Linear high-density polyethylenes with molar masses M _w between 240 and 1,000,000 g/mol, obtained by metallocene catalysts, were characterized in shear using oscillatory and creep tests. The polydispersities of the molar mass distributions (MMDs) lay between 1 and 16. The resulting zero shear-rate viscosities η₀ covered a range from 2.5×10⁻³ to around 10⁸ Pas. Above a critical molar mass of M _c≈2,900 g/mol, the experimental results can be described by the relation η₀ ∼ M _w^3.6, independently of the MMD. The oscillatory data were fitted with a Carreau–Yasuda equation. The resulting parameters were correlated to molecular structure. The parameter a, being a quantity for the width of the transition between the Newtonian and the non-Newtonian regime, showed a dependence on the molar mass M _w but not on M _w/M _n. The parameter λ of the Carreau-Yasuda equation was found to be the reciprocal crossover frequency for all samples with a log-Gaussian MMD. λ depends on the molar mass M _w and also on M _w/M _n.

On local strong solutions to the Cauchy problem of the two-dimensional full compressible magnetohydrodynamic equations with vacuum and zero heat conduction

This paper concerns the Cauchy problem of the two-dimensional full compressible magnetohydrodynamic equations with zero heat-conduction and vacuum as far field density. In particular, the initial density can have compact support. We prove that the Cauchy problem admits a local strong solution provided both the initial density and the initial magnetic field decay not too slow at infinity.     

Zero Current Potentiometry for Measuring the Interface Potential at the Electrode/Solution Interface. Theoretical and Experimental Study

A novel electrochemical approach has been proposed to measure the interface potential at the electrode/solution interface based on reconstructing the three‐electrode system of a potentiostat. In this work, the method was investigated both theoretically and experimentally. Mathematical expressions, describing current? potential characteristics, were derived. Zero current potential E_zcp was defined as the potential at which the current is zero based on linear sweep voltammetry, and was determined from the I? E curve to measure the interface potential. The experimental results obtained with the couples Fe(CN)₆^3?/Fe(CN)₆^4? and Co(NH₃)₆³⁺/Co(NH₃)₆²⁺ as examples agreed well with the theory. The proposed approach exhibits an excellent performance for measuring the interface potential due to the advantages of rapidity, high stability and accuracy.     

Large gaps between consecutive zeros of the Riemann zeta-function

Combining the amplifiers, we exhibit other choices of coefficients that improve the results on large gaps between the zeros of the Riemann zeta-function. Precisely, assuming the Generalized Riemann Hypothesis (GRH), we show that there exist infinitely many consecutive gaps greater than 3.033 times the average spacing.     

正交饱和效应模型及其统计分析

文\cite{14}讨论了2水平正交饱和设计的一种统计分析方法---零效应搜索法, 本文将此方法推广到一般的饱和模型---正交饱和效应模型. 首先给出正交饱和效应模型的定义及其相关的参数估计和平方和分解, 然后用零效应搜索法对显著效应的检验问题进行分析, 模拟结果显示效果很好.