Effects of multi-frequency ultrasound on freezing rates and quality attributes of potatoes

The effects of multi-frequency ultrasound assisted freezing on the freezing rate, microstructure, quality properties (drip loss, firmness, total calcium content, l-ascorbic acid content and total phenol content) of potatoes were studied. The results indicated that the freezing effects of multi-frequency ultrasound was better than those of single-frequency ultrasound. Multi-frequency ultrasound could significantly increase the freezing rate and preserve the quality of frozen samples better. With increase in the number of ultrasonic frequencies, the freezing effect was more obvious. In addition, scan electron microscopy (SEM) images showed that the ice crystals formed by the multi-frequency ultrasonic treatment were fine and uniformly distributed, which caused less damage to the frozen potato samples. From the analysis of the quality attributes, the nutritional values of the samples after multi-frequency ultrasonic treatment was higher, but attention should be paid to the negative influence of the hydroxyl radical generated by the multi-frequency ultrasound.     

Front face synchronous fluorescence as a tool for the quality assurance of Greek milk

This research focuses on implementing the low cost and rapid front face synchronous fluorescence (SyFS) in order to ensure the quality assurance of Greek milk. Specifically, samples originated from the Greek domestic production of goat, sheep, cow, as well as foreign cow milk samples and adulterated cow milk samples. SyFS spectra were acquired in the excitation area of 250–500 nm with (Δλ)= 100 nm. Greek and foreign cow milk samples were differentiated based on intensity variations at wavelengths 350–515 nm, 540–579 nm, and 580–600 nm. The emissions at these wavelength positions correspond to tryptophan, vitamin A, and riboflavin. The supervised model with 94 samples exhibited p-value = 7,98E-11, RMSEE= 0,29171, RMSEcv= 0,29284 and RMSEP= 0,98013, AUROC for Greek samples= 0,61 and AUROC for foreign= 0,85. We differentiated milk samples according to the animal type with PCA and OPLS-DA models of 107 samples exhibiting RMSEE= 0,225842, RMSEcv= 0,228054 and RMSEP= 0,518635, AUROC for sheep samples= 0,99, AUROC for goat samples= 0,98 and AUROC for cow samples= 0,96. In fact, the emission band 350–591 nm characterized sheep milk and corresponds to aminoacids and fatty acids, cow milk was related to the 350–600 nm emission band related to the b-carotene and to the goat milk the emission bands 350–505 nm and 520–600 nm were attributed to tryptophan, NADH and Rivoflabin. Finally, we investigated whether SyFS coupled with chemometrics may provide preliminary evidence on adulterated cow milk samples. All models were validated with permutation testing, p-values and ROC curves.     

High‐performance liquid chromatographic column packings with different particle sizes: Chromatographic behavior for the quality analysis of HuanglianShangqing pill

The chromatographic separation of traditional Chinese medicines is still a highly challenging task in analytical science with respect to its hundreds and thousands of chemical compounds, while increase of separation efficiency can greatly improve the separation power of chromatographic column for traditional Chinese medicine. In this study, 13 bioactive components in HuanglianShangqing pill were selected as an index to optimize the separation conditions and evaluate the system suitability of three commercially available columns packed with 1.8, 3.5, and 5.0 μm particles. The chromatographic separations were obtained by the most appropriate Eclipse Plus C₁₈ column (100 × 2.1 mm, 3.5 μm) within 45 min using gradient elution with aqueous‐ammonium acetate (10 mmol/L, pH 5.0) and acetonitrile, at a flow rate of 0.3 mL/min and an operating temperature of 30°C. The quality of HuanglianShangqing pill was assessed through combining simultaneous quantification of 13 compounds with fingerprint analysis. For the qualitative analysis, mass spectrometry was used to confirm the 13 compounds. All the validation data conformed to the acceptable requirements. For the fingerprint analysis, 32 peaks were selected as the common peaks at 254 nm to evaluate the similarities among HuanglianShangqing pills obtained from ten manufacturers.     

Enantioselective comprehensive two‐dimensional gas chromatography. A route to elucidate the authenticity and origin of Rosa damascena Miller essential oils

The analysis of Bulgarian and Turkish Rosa damascena Miller essential oils was performed by flow‐modulated comprehensive two‐dimensional gas chromatography using simultaneous detection of the second column effluent by flame ionization and quadrupole mass spectrometric detection. Enantioselective separations were obtained by running the samples on 2,3‐di‐O‐ethyl‐6‐O‐tert‐butyldimethylsilyl‐β‐cyclodextrin column as the first column and on polyethylene glycol as the second column. The determination of enantiomeric or diastereomeric excess of some terpenoic solutes is a possible route for quality or authenticity control as well as for the elucidation of the country of origin.     

Development of a method using high‐performance liquid chromatographic fingerprint and multi‐ingredients quantitative analysis for the quality control of Yangxinshi Pian

A simple and reliable method of high‐performance liquid chromatography with diode array detection method was developed for fingerprint analysis and simultaneous determination of six compounds including puerarin, salvianolic acid B, berberine hydrochloride, palmatine chloride, dehydrocorydaline, and icariin in the Chinese medicine preparation Yangxinshi Pian. The separation was performed on an Agilent Eclipse XDB‐C₁₈ reserved‐phase column (250 mm × 4.6mm I.D., 5 μm) using gradient elution with 50 mmol/L monopotassium phosphate aqueous solution and methanol as mobile phase at a flow rate of 1.0 mL/min. The column operating temperature was set at 30°C, and the detection wavelength was 280 nm. The method was validated by linearity, precision, accuracy, stability, and recovery. For fingerprint analysis, 25 peaks were selected as the common peaks, and four kinds of similarities including cosine similarity (S), ratio of similarity (S′), projection content similarity (C), and content similarity (P) were applied to evaluate the quality consistency of different batches of Yangxinshi Pian. The results showed that the developed method was an efficient tool for quality evaluation of Yangxinshi Pian.     

Ultraviolet C radiation influences the robustness of RNA integrity measurement

The analytical and clinical validity of analyses of RNA samples destined for clinical diagnosis and therapeutic management is directly impacted by RNA quality. RNA is affected by heat, enzymatic degradation, and Ultraviolet (UV) light. RNA from three eukaryotic cell lines was degraded by heat, RNase, or UV light. RNA integrity values obtained with the benchmark Agilent Bioanalyzer 2100 system were compared with those from the more recent QIAxcel Advanced system. The application of this novel method has allowed us to unravel differences between RNA biophysical and biochemical degradation modes. Agilent RNA integrity number (RIN) and QIAxcel RIS were comparable in heat‐degraded and RNase III‐degraded RNA. Agilent RIN and QIAxcel RIS were comparable at a RIN decision level of 7 in UV‐degraded RNA but not overall. The QIAxcel RIS method was more precise than Agilent RIN for RIN<8, while the inverse was true for RIN≥8. Greater degradation of mRNA and rRNA in UV‐damaged samples hampered the Agilent RIN calculation algorithm. Overall, RIS was more robust than RIN for assessing RNA integrity. The ΔΔCt‐values for heat‐ and UV‐degraded RNA samples showed slightly higher correlation with RIS than with RIN. RNA integrity can be used to categorize RNA samples for suitability for downstream gene expression analyses, independently of the RNA degradation mechanism. The new method QIAxcel is more robust and therefore allows more accurate categorization of compromised RNA samples.     

NUMERICAL SIMULATION WITH A COMPREHENSIVE CHEMICAL TRANSPORT MODEL OF NITRATE, SULFATE, AND AMMONIUM AEROSOL DISTRIBUTIONS OVER EAST ASIA

The transport and chemical production processes of nitrate, sulfate, and ammonium aerosols over East Asia were investigated by use of the Models-3 Community Multi-scale Air Quality （CMAQ） modeling system coupled with the Regional Atmospheric Modeling System （RAMS）. For the evaluation of the model＇s ability in depicting their 3-dimensional concentration distributions and temporal variations, modeled concentrations of nitrate, sulfate, and ammonium aerosols are compared with the observations obtained at a ground station in Japan in March 2001 and onboard of an aircraft DC-8 on 18 and 21 March 2001 during the Transport and Chemical Evolution over the Pacific （TRACE-P） field campaign. Comparison shows that simulated values of nitrate, sulfate, and ammonium aerosols are generally in good agreement with their observed data, and the model captures most important observed features, and reproduces temporal and spatial variations of nitrate, sulfate, and ammonium aerosol concentrations reasonably well, e.g., the timing and locations of the concentration spikes of nitrate, sulfate, and ammonium aerosols are well reproduced, but large discrepancies between observed and simulated values are also clearly seen at some points and some times due to the coarse grid resolution and uncertainties of the emissions used in this study. This comparison results indicate that CMAQ is able to simulate the distributions of nitrate, sulfate, and ammonium aerosols and their related species in the troposphere over East Asia reasonably well.