等离子体电极普克尔盒研究进展

等离子体电极普克尔盒(PEPC)用作多程放大控制、自激振荡抑制以及反激光隔离,是大型高功率固体激光器的核心器件。本文从高功率固体激光器的发展对光开关提出的要求出发,系统地综述了等离子体电极普克尔盒的性能特点以及研究进展。重点介绍了中国工程物理研究院激光聚变研究中心近年来在PEPC研究方面所取得的进展,包括单脉冲驱动的组合口径PEPC、低损耗PEPC以及重复频率运转的PEPC。     

大型偏心结构吊装欠约束问题研究

吊装施工过程中被吊模块的水平度是作业要求的重要指标,通常需要增加配重调平。传统有限元方法需要补充约束以消除单元刚体位移,且需要重复计算平衡方程来求解调平载荷,效率不高。将模块的运动分解为随动坐标系的整体运动以及相对该坐标系的弹性变形,可将欠约束问题化为多体系统的静平衡问题。基于虚功率原理推导了吊装平顺时刻的节点力平衡方程以及相应的切线刚度矩阵,并将配重表示为基础配重与载荷系数相乘的形式。通过对节点力平衡方程求导,得到一组以载荷系数为自变量的微分方程,通过求解微分方程并结合水平度判据,可快速搜寻满足水平度要求的载荷系数。数值算例表明,该方法在解决偏心模块吊装欠约束问题方面具有明显的优势,在确定配重载荷方面具有较快的速度和合理的精度。     

Universal power law behavior of the AC conductivity versus frequency of agglomerate morphologies in conductive carbon nanotube‐reinforced epoxy networks

The Jonscher universal power law for ac conductivity versus frequency (f = ω/2π) in the dispersion region was tested for a multiwall carbon nanotube/epoxy nanocomposite. The effect of changes in agglomerate morphology on the fitting parameters A and n in the equation σ_{ac =} Aωⁿ was investigated. Changing nanotube agglomerate morphology was tracked by optical microscopy through curing. Evolving morphology was compared alongside ac conductivity obtained via a broadband dielectric spectrometer to elucidate possible physical meaning of the universal power law in the context of this system. The ?logA/n was unaffected by changes in agglomerate morphology affected during cure, yet connected with each other in their dependence on temperature. For this system, the relationship between the fitting parameters in the universal dynamic response equation remains empirical at this stage with regard to biphasic “texture” or morphology within such a network. Electrical conductivity σ versus frequency ω for a composite consisting of agglomerated multiwalled carbon nanotubes dispersed throughout a cured epoxy matrix was discovered to follow the empirical universal dynamic response equation of Jonscher. The frequency behavior of the exponent n is discussed in terms of underlying morphology throughout which charge carriers migrate. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 1918–1923     

Developing Flexible Quinacridone-Derivatives-Based Photothermal Evaporaters for Solar Steam and Thermoelectric Power Generation

Solar-driven interfacial vaporization by localizing solar-thermal energy conversion to the air−water interface has attracted tremendous attention. In the process of converting solar energy into heat energy, photothermal materials play an essential role. Herein, a flexible solar-thermal material di-cyan substituted 5,12-dibutylquinacridone (DCN−4CQA)@Paper was developed by coating photothermal quinacridone derivatives on the cellulose paper. The DCN−4CQA@Paper combines desired chemical and physical properties, broadband light-absorbing, and shape-conforming abilities that render efficient photothermic vaporization. Notably, synergetic coupling of solar-steam and solar-electricity technologies by integrating DCN−4CQA@Paper and the thermoelectric devices is realized without trade-offs, highlighting the practical consideration toward more impactful solar heat exploitation. Such solar distillation and low-grade heat-to-electricity generation functions can provide potential opportunities for fresh water and electricity supply in off-grid or remote areas.     

具有高安全性和有效性的Ⅱ期两阶段临床试验

Ⅱ期临床试验的主要目的是对药物治疗的安全性和有效性进行评估.针对具有高安全性的Ⅱ期两阶段临床试验,给出小样本量下关于安全性和有效性的精确检验方法,并证明最大Ⅰ类错误概率与Ⅱ类错误概率分别在原假设和备择假设的边界处达到.在期望样本量最小原则下,给出最优两阶段设计的构造方法和常用设计表,供实际应用选用.     

基于虚拟中心电流法的 HL-2M快控电源数学模型

针对中国环流器2号M(HL-2M)装置中用于核聚变物理实验等离子体的垂直不稳定性控制的快控电源拓扑结构，充分考虑线圈的自感与互感对输出的影响，构建出数学模型，首次提出并运用虚拟中心电流法，使得控制算法更加简单，采用多输入多输出的控制方法，利用2个参量控制3个变量。本文基于基本供电方案得到多线圈耦合电压，基于快控电源拓扑推导出快控电源电路方程，再将其合并得到最终的线圈电压数学模型，最后进行仿真验证。结果表明数学模型搭建正确，为今后进行进一步计算提供了坚实的基础。     

湍流大气传输中跟踪抖动对远场影响的仿真研究

分析了跟踪抖动对湍流大气传输远场光斑的影响。基于麦克斯韦电磁场理论,采用大气相干长度对大气湍流进行描述,推导了发射光束因跟踪抖动导致光轴偏离的远场表达式。在此基础上,利用相位屏法模拟抖动引起的倾斜相位和大气折射率起伏引起的相位调制,并采用低频补偿的功率谱反演法对传输过程进行了数值仿真。分析了不同跟踪抖动、湍流强度条件下远场光斑质心脱靶量的变化,以及不同尺寸模拟目标的回波概率。分析结果表明,在传输距离为10 km时,强湍流造成的远场光斑脱靶量可达几十μrad;当跟踪抖动较大时,湍流强弱对脱靶量影响差别很小。最后,对一定尺寸的模拟目标,从探测回波概率的角度给出了发射系统跟踪抖动量的控制范围。     

Analytical and approximate solutions of(2+1)-dimensional time-fractional Burgers-Kadomtsev-Petviashvili equation

In this paper, we applied the sub-equation method to obtain a new exact solution set for the extended version of the time-fractional Kadomtsev-Petviashvili equation, namely BurgersKadomtsev-Petviashvili equation(Burgers-K-P) that arises in shallow water waves.Furthermore, using the residual power series method(RPSM), approximate solutions of the equation were obtained with the help of the Mathematica symbolic computation package. We also presented a few graphical illustrations for some surfaces. The fractional derivatives were considered in the conformable sense. All of the obtained solutions were replaced back in the governing equation to check and ensure the reliability of the method. The numerical outcomes confirmed that both methods are simple, robust and effective to achieve exact and approximate solutions of nonlinear fractional differential equations.