基于B3PyMPM∶Cs高效叠层OLED器件的制备

以B 3 PyMPM∶Cs/Al/HAT-CN作为电荷生成单元制备高效叠层绿色磷光有机电致发光器件,叠层器件的最大电流效率和最大流明效率分别为172.2 cd/A和111.0 lm/W,在5 mA/cm^2电流密度下,叠层器件的电压和亮度分别为传统器件的2.04倍和2.84倍.为了探究叠层器件性能优于传统器件的原因,研究了电荷生成单元内的电荷产生和注入过程,以及薄层铝对电子注入特性和电荷生成单元稳定性的影响.实验结果表明,电荷能够有效地在电荷生成单元内产生并顺利注入电子传输层中,B3PyMPM∶Cs和HAT-CN间Al薄层的插入能够进一步提高电子注入效率及器件结构的稳定性.     

Investigation on electrochemical analysis of ZnO nanoparticles and its performance for dye-sensitized solar cells using various natural dyes

The dye-sensitized solar cells were fabricated using five different dyes extracted from the Ixora flower, Pongame leaves, Neem leaves, Pongame leaves, and Almond fruit. ZnO nanoparticle has been prepared via the solvothermal method. The prepared samples were characterized by structural properties of XRD, FE-SEM EDAX, and HR-TEM, Optical properties of UV–Visible and FTIR studies, and Conductivity studies of EIS spectra. The effect of natural dye extract from chlorophyll and anthocyanin pigment group was investigated for the performance of J-V characterization. The efficiency of almond extract of solar cells is found to be better than that of the other four solar cells.     

Tailoring the dielectric properties and energy storage density of 1−x(0.94NaNbO3−0.06SZ)−xBi2O3 through substitution strategy

Energy storage using dielectric capacitors is a growing area of research and development. However, designing a highly performing dielectric capacitor is still a challenge. Despite the excellent results achieved in lead-based dielectrics, lead-free substitutes are essential because of the environmental concerns associated with lead-based products. The lead-free 1?x (0.94NaNbO₃? 0.06SrZrO₃)+ x Bi₂O₃ ceramics abbreviated NNSZ + xB for x = 0.0, 0.05, 0.1, 0.15, and 0.20 was fabricated via solid-state reaction. A recoverable energy density of 2.93 J cm?³ was obtained for NNSZ+0.1B, associated with high thermal stability (25–130 °C), excellent cycling (N = 10⁵), and high efficiency (η) of 83.5%. Moreover, the introduction of Bi₂O₃ significantly improved the electrical insulation (?_r at 1 kHz = 1608 and tan δ = 0.0038) and breakdown strength (380 kVcm?¹) of NNSZ+0.1B by minimizing the formation of sodium, bismuth, and oxygen vacancies. The results obtained in this study provide a benchmark for further investigations on NaNbO₃-based ceramics. More importantly, this study suggests that NNSZ + xB ceramics can be used in pulsed power technology.     

A postscript on aggregate Farrell efficiencies

In this note we derive alternative weighting schemes that complement those of Färe and Zelenyuk (2003) for consistent aggregation of Farrell efficiencies when the technology exhibits (global) constant returns to scale.     

On the efficiency of energy harvesting using vortex-induced vibrations of cables

Many technologies based on fluid–structure interaction mechanisms are being developed to harvest energy from geophysical flows. The velocity of such flows is low, and so is their energy density. Large systems are therefore required to extract a significant amount of energy. The question of the efficiency of energy harvesting using vortex-induced vibrations (VIV) of cables is addressed in this paper, through two reference configurations: (i) a long tensioned cable with periodically-distributed harvesters and (ii) a hanging cable with a single harvester at its upper extremity. After validation against either direct numerical simulations or experiments, an appropriate reduced-order wake-oscillator model is used to perform parametric studies of the impact of the harvesting parameters on the efficiency. For both configurations, an optimal set of parameters is identified and it is shown that the maximum efficiency is close to the value reached with an elastically-mounted rigid cylinder. The variability of the efficiency is studied in light of the fundamental properties of each configuration, i.e. body flexibility and gravity-induced spatial variation of the tension. In the periodically-distributed harvester configuration, it is found that the standing-wave nature of the vibration and structural mode selection plays a central role in energy extraction. In contrast, the efficiency of the hanging cable is essentially driven by the occurrence of traveling wave vibrations.     

Investigation of acoustic and geometric effects on the sonoreactor performance

In this work, three design configurations of a sonoreactor are considered under various operating conditions, and the acoustic characteristics during water sonication are investigated while using an immersed-type ultrasonic flat transducer probe in a sonoreactor model. Numerical models are also developed to simulate the sonication process, and they are successfully validated and compared with available data in the literature. Several sets of numerical investigations are conducted using the finite-element method and solved by the computational acoustics module in the COMSOL Multiphysics. The effects of the acoustical and geometrical parameters are investigated, analyzed, and reported, including the ultrasonic frequency, acoustic intensity, and scaling-up the reactor. The present study includes a parametric investigation examining the change of the ultrasonic frequency, intensity, and probe immersion depth on the performance. The results of the parametric study show that the highest cavitation energy corresponds to the maximum magnitude of negative pressure that takes place in the range of 60–80 kHz. The cavitation energy analyses are conducted under the conditions of 20 kHz of frequency and at 36 W input power. It is found that the cavitation energy of 15.87 W could produce 2.98 × 10⁻¹⁰ mol/J of sonochemical efficiency. In addition, the effect of altering the transducer probe depth changes the acoustic pressure field insignificantly. Furthermore, a recommendation is made to improve the sonochemical efficiency by introducing more considerable ultrasound input power while operating the sonoreactor at an ultrasonic frequency lower than 60 kHz. The results presented in this paper provide a comprehensive assessment of different sonoreactors and the feasibility of scaling-up their production rate.     

Efficiency assessment of primary care providers: A conditional nonparametric approach

This paper uses a fully nonparametric approach to estimate efficiency measures for primary care units incorporating the effect of (exogenous) environmental factors. This methodology allows us to account for different types of variables (continuous and discrete) describing the main characteristics of patients served by those providers. In addition, we use an extension of this nonparametric approach to deal with the presence of undesirable outputs in data, represented by the rates of hospitalization for ambulatory care sensitive condition (ACSC). The empirical results show that all the exogenous variables considered have a significant and negative effect on efficiency estimates.     

一种车用单刀双掷开关的质检仪器研发

介绍了一种车用单刀双掷开关质量检测仪器的研发,包括检测系统的硬件设计、检测原理以及算法软件开发。首先,根据单刀双掷开关的工作原理及质量检测要求,开发了检测手指触觉压力的机械装置,以及控制开关通道切换的继电器控制电路;在此基础上,开发了相应的检测算法,可实现对开关切换状态、电压差以及手指触觉压力进行自动化的数据采集、分析、检测和判断,从而挑选出合格的开关;最后,设计了触屏人机交互界面,可实时显示产品检测的参数。该检测设备在某自动化生产线上经过近一年时间的检测验证,证明系统运行平稳,检测效果良好、误检率低,可以完全取代传统的人工检测方式,提高了开关的检测效率,降低了检测人员的工作量。     

A stochastic approach to capture crystal plasticity

A stochastic crystal plasticity model is proposed and applied within the rate-independent regime. As opposed to conventional deterministic algorithms wherein multiple slip systems are activated and redundant constraints may exist, the new Monte Carlo plasticity (MCP) paradigm is based on a stochastic chain of singly activated slip systems and thus avoids the possible ill-condition associated with multi-slip algorithms. The choice of the activated slip system is made at each Monte Carlo (MC) step based on the Metropolis algorithm. The MCP model is implemented within a Material Point Method (MPM) as a constitutive model to capture the elasto-plastic behavior of polycrystalline materials. A comparison with a commonly used singular value decomposition (SVD) algorithm indicates that MCP offers superior computational efficiency while maintaining comparable accuracy.     

New third and fourth order nonlinear solvers for computing multiple roots

We present a new third order method for finding multiple roots of nonlinear equations based on the scheme for simple roots developed by Kou et al. [J. Kou, Y. Li, X. Wang, A family of fourth-order methods for solving non-linear equations, Appl. Math. Comput. 188 (2007) 1031-1036]. Further investigation gives rise to new third and fourth order families of methods which do not require second derivative. The fourth order family has optimal order, since it requires three evaluations per step, namely one evaluation of function and two evaluations of first derivative. The efficacy is tested on a number of relevant numerical problems. Computational results ascertain that the present methods are competitive with other similar robust methods.