四苯乙烯及其衍生物超声辅助合成与光电性能研究

四苯乙烯及其衍生物被广泛报道具有典型的聚集诱导发光(AIE)性能，在有机发光二极管、荧光离子探针、生物化学成像等诸多领域有着广阔的应用前景。以此为背景，可以将相关前沿议题转化为本科综合实验教学方案。本文针对现有的实验教学方案设计进行了探究和改进，在原有使用McMurry偶联反应制备四苯乙烯的实验方案基础上，利用生色团上不同取代基的推拉电子效应设计平行对照试验，合成溴代、甲氧基取代的四苯乙烯衍生物，实现了荧光发射光谱最大峰波长的显著移动，使得在紫外灯下即可观察到荧光从蓝色到黄绿色的变化。利用超声辅助合成的方法，成功将反应时间从原有的6–8 h压缩至2 h，使之更适应本科教学实验所需的时间空间。除光学性能表征外，本实验还综合了循环伏安法表征产物的能带结构。本实验针对原有方案进行了诸多改进，引入平行实验锻炼科学思维、别出心裁地引入超声辅助合成法，极大地缩短了反应时间，展现出较强的前沿性、绿色性和高效性。     

多孔氮化硼掺杂聚吡咯-2,3,3-三甲基吲哚固相微萃取涂层的制备及多环芳烃的检测

多环芳烃(PAHs)是持久性有机污染物中的一种，大部分具有较强的致癌、致畸和致突变性，对生态环境和人类健康易造成严重威胁。由于环境样品基质复杂且其中PAHs含量低，因此在仪器分析之前需要对环境样品进行必要的前处理。萃取材料的特性是决定大部分前处理技术萃取效率的关键。基于此，本文以低成本且富含较多官能团的吡咯(py)、2,3,3-三甲基吲哚(2,3,3-TMe@In)为单体，多孔氮化硼为掺杂物，采用电化学循环伏安法制备出多孔氮化硼掺杂聚吡咯-2,3,3-三甲基吲哚(Ppy/P2,3,3-TMe@In/BN)复合涂层，通过扫描电子显微镜、热稳定性分析、傅里叶红外光谱等手段对Ppy/P2,3,3-TMe@In/BN进行表征，结果表明：该涂层呈现出多孔、多褶皱的枝状结构，该结构有利于增加涂层的比表面积，从而实现对PAHs的大量富集；在320℃解吸温度下，涂层材料的色谱基线基本稳定，表明该涂层具有良好的热稳定性。将其修饰在不锈钢丝表面制成固相微萃取涂层，结合气相色谱-氢火焰离子化检测器，对影响萃取和分离萘(NAP)、苊(ANY)、芴(FLU)3种PAHs的条件进行优化，建立了用于以上3种PAHs...     

基于NiCo2O4纳米片电极的非对称混合电容器

The looming global energy crisis and ever-increasing energy demands have catalyzed the development of renewable energy storage systems. In this regard, supercapacitors (SCs) have attracted widespread attention because of their advantageous attributes such as high power density, excellent cycle stability, and environmental friendliness. However, SCs exhibit low energy density and it is important to optimize electrode materials to improve the overall performance of these devices. Among the various electrode materials available, spinel nickel cobaltate (NiCo₂O₄) is particularly interesting because of its excellent theoretical capacitance. Based on the understanding that the performances of the electrode materials strongly depend on their morphologies and structures, in this study, we successfully synthesized NiCo₂O₄ nanosheets on Ni foam via a simple hydrothermal route followed by calcination. The structures and morphologies of the as-synthesized products were characterized by X-ray diffraction, scanning electron microscopy, and Brunauer-Emmett-Teller (BET) surface area analysis, and the results showed that they were uniformly distributed on the Ni foam support. The surface chemical states of the elements in the samples were identified by X-ray photoelectron spectroscopy. The as-synthesized NiCo₂O₄ products were then tested as cathode materials for supercapacitors in a traditional three-electrode system. The electrochemical performances of the NiCo₂O₄ electrode materials were studied and the area capacitance was found to be 1.26 C·cm^-2 at a current density of 1 mA·cm^-2. Furthermore, outstanding cycling stability with 97.6% retention of the initial discharge capacitance after 10000 cycles and excellent rate performance (67.5% capacitance retention with the current density from 1 to 14 mA·cm^-2) were achieved. It was found that the Ni foam supporting the NiCo₂O₄ nanosheets increased the conductivity of the electrode materials. However, it is worth noting that the contribution of nickel foam to the areal capacitance of the electrode materials was almost zero during the charge and discharge processes. To further investigate the practical application of the as-synthesized NiCo₂O₄ nanosheets-based electrode, a device was assembled with the as-prepared samples as the positive electrode and active carbon (AC) as the negative electrode. The assembled supercapacitor showed energy densities of 0.14 and 0.09 Wh·cm^-3 at 1.56 and 4.5 W·cm^-3, respectively. Furthermore, it was able to maintain 95% of its initial specific capacitance after 10000 cycles. The excellent electrochemical performance of the NiCo₂O₄ nanosheets could be ascribed to their unique spatial structure composed of interconnected ultrathin nanosheets, which facilitated electron transportation and ion penetration, suggesting their potential applications as electrode materials for high performance supercapacitors. The present synthetic route can be extended to other ternary transition metal oxides/sulfides for future energy storage devices and systems.     

次线性期望下的一般中心极限定理

受Peng-中心极限定理的启发,本文主要应用G-正态分布的概念,放宽Peng-中心极限定理的条件,在次线性期望下得到形式更为一般的中心极限定理.首先,将均值条件E[X_n]=ε[X_n]=0放宽为|E[X_n]|+|ε[X_n]|=O(1/n);其次,应用随机变量截断的方法,放宽随机变量的2阶矩与2+δ阶矩条件;最后,将该定理的Peng-独立性条件进行放宽,得到卷积独立随机变量的中心极限定理.     

砂土串囊式充气锚杆承载力的研究

在砂土地层中,串囊式充气锚杆的研究还比较少,其承载特性及受力机理尚不明确。本文基于莫尔-库仑模型和Vesic圆孔扩张理论法,分别对圆柱体、球体、组合体、椭球体假设下的串囊式充气锚杆的扩大段进行计算分析。并将计算结果与试验得到的实测值进行对比。结果表明:四种形状假设中椭球体的形状假设理论值与实测值的误差最小,仅为8.35%。通过拟合试验数据,并引入与端阻力和侧摩阻力有关的两个系数对承载力公式进行修正,得到了抗拔承载力的经验公式。     

DSA、CTA联合MR影像评估AIS患者脑支循环及预后性关系

探讨数字减影血管成像(DSA)、计算机断层扫描血管成像(CTA)联合磁共振(MR)影像评估急性缺血性卒中(AIS)患者脑支循环及预后性关系。选取60例大脑中动脉M1段急性闭塞所致AIS患者为研究对象,根据DSA、CTA与MR影像对其脑侧支循环评估,比较患者基线资料、结局指标等,并分析预后性。结果发现:基于DSA、CTA与MR影像对AIS患者脑侧支循环评估结果一致性良好;3种影像模式下脑侧支循环良好组与不良组结局资料差异显著(P<0.05);多因素分析显示,FVH-ASPECTS评分、rLMC评分、ASITN/SIR分级量表均为AIS患者神经功能预后的独立影响因素。总之,DSA、CTA、MR影像对AIS患者脑侧支循环评估具有一致性,且FVH-ASPECTS评分、rLMC评分、ASITN/SIR分级量表均为AIS患者神经功能预后的独立影响因素。     

微穿孔板几何参数估算及其对吸声性能的影响

不规则孔微穿孔板几何参数无法直接获知,造成吸声性能计算困难,故提出一种微穿孔板几何参数估算方法。将不规则孔等效处理为圆孔,利用马氏理论关于圆孔微穿孔板的基本理论,建立了微穿孔板几何参数估算模型;将参数估算结果用于吸声性能预测,理论计算与实验结果吻合。根据微穿孔板几何参数对高吸声性能区域的影响,探讨了马氏理论适用极限与微穿孔板几何参数的关系,以及微穿孔板受粉尘污染后吸声性能演变规律。将微穿孔板参数点取在面积较大的高吸声性能区域中间部位,可获得较大的马氏理论适用极限;微穿孔板参数点位于高吸声性能区域右上部位时,一定程度的粉尘污染不会降低吸声性能.