Sample preparation,instrumental analysis,and natural distribution of complex organic pollutants in the wastewater from unconventional gas production

Large amounts of flowback and produced water (FPW) have been generated from hydraulic fracturing process for the production of unconventional gas such as shale gas. Complex organic pollutants are abundantly present in FPW with revealed toxicity to aquatic organisms and these contaminants may transfer into surrounding aquatic environment. Characterization and determination of complicated organic pollutants in FPW remains a challenge due to its complex composition and high salinity matrix. This review article covers the progress of recent 5 years regarding the sample preparation and instrumental analysis methods and thus summarizes the advantages and disadvantages of these methods for critical analysis of organic contaminants in FPW samples. Furthermore, the natural distribution of detected organic compounds and their transformation were reviewed and discussed to enhance the understanding of spatial and temporal behaviors of these organic pollutants in natural environment, paving the way for future development of pollution control policies and strategies. Enlightened by the studies of FPW contamination in the US, the investigations of FPW contamination in China continued to grow due to rapidly growing production of shale gas in China and resulted pollution.     

Dynamics modeling and robotic-assist,leader-follower control of tractor convoys

This paper proposes a generalized dynamics model and a leader-follower control architecture for skid-steered tracked vehicles towing polar sleds. The model couples existing formulations in the literature for the powertrain components with the vehicle-terrain interaction to capture the salient features of terrain trafficability and predict the vehicles response. This coupling is essential for making realistic predictions of the vehicles traversing capabilities due to the power-load relationship at the engine output. The objective of the model is to capture adequate fidelity of the powertrain and off-road vehicle dynamics while minimizing the computational cost for model based design of leader-follower control algorithms. The leader-follower control architecture presented proposes maintaining a flexible formation by using a look-ahead technique along with a way point following strategy. Results simulate one leader-follower tractor pair where the leader is forced to take an abrupt turn and experiences large oscillations of its drawbar arm indicating potential payload instability. However, the follower tractor maintains the flexible formation but keeps its payload stable. This highlights the robustness of the proposed approach where the follower vehicle can reject errors in human leader driving.     

Synthesis,crystal structure,vibrational spectra,optical properties and theoretical investigation of a two-dimensional self-assembled organic-inorganic hybrid material

Organic–inorganic hybrid material of formula (C₄H₃SC₂H₄NH₃)₂[PbI₄] was synthesized and studied by X-ray diffraction, Infrared absorption, Raman scattering, UV–Visible absorption and photoluminescence measurements. The molecule crystallizes as an organic–inorganic two-dimensional (2D) structure built up from infinite PbI₆ octahedra surrounded by organic cations. Such a structure may be regarded as quantum wells system in which the inorganic layers act as semiconductor wells and the organic cations act as insulator barriers. Room temperature IR and Raman spectra were recorded in the 520–3500 and 10–3500 cm⁻¹ frequency range, respectively. Optical absorption measurements performed on thin films of (C₄H₃SC₂H₄NH₃)₂[PbI₄] revealed three distinct bands at 2.4, 2.66 and 3.25 eV. We also report DFT calculations of the electric dipole moments (μ), polarizability (α), the static first hyperpolarizability (β) and HOMO–LUMO analysis of the title compound investigated by GAUSSIAN 09 package. The calculated static first Hyperpolarizability is equal to 11.46 × 10⁻³¹ esu.     

Oxidation of aromatic sulfides with molecular oxygen: Controllable synthesis of sulfoxides or sulfones

The recent development of selective oxidation of aromatic sulfides with molecular oxygen was highlighted. The sulfoxides and sulfones could be obtained by simply switching the reaction media, i.e., bis(2-butoxyethyl)ether (BBE) or poly(ethylene glycol)dimethyl ether (PEGDME). The application of the high-boiling-point polyether as an initiator and green media can eliminate the need of large quantities of additives and volatile solvents. This strategy represents an economic and eco-friendly method that could find potential applications.     

Effect of polyethylene glycol on corrosion of fresh macroporous silicon in 1.0 M NaOH and application in determination of porosity and thickness by gravimetric measurement

Abstract

This work presents on improvement in gravimetric measurement for determining the porosity and thickness of microporous silicon. Herein, the corrosion of fresh macroporous silicon (f-MPSi) in 1.0?M NaOH with different concentrations of polyethylene glycol (PEG 200/400/600) was studied by weight loss measurement and scanning electron microscopy (SEM). The results showed that the corrosion rate decreased with increasing polyethylene glycol concentration, and increased with an increase in temperature. Polyethylene glycol can inhibit the corrosion of f-MPSi in NaOH solution. Moreover, 1.0?M NaOH/PEG 600 (10%) can be used as the optimized solution to remove f-MPSi for measuring its porosity and thickness by gravimetric measurement.     

Developing the Low-Temperature Oxidation Mechanism of Cyclopentane: An Experimental and Theoretical Study

At present, the reactivity of cyclic alkanes is estimated by comparison with acyclic hydrocarbons. Due to the difference in the structure of cycloalkanes and acycloalkanes, the thermodynamic data obtained by analogy are not applicable. In this study, a molecular beam sampling vacuum ultraviolet photoionization time-of-flight mass spectrometer (MB-VUV-PI-TOFMS) was applied to study the low-temperature oxidation of cyclopentane (CPT) at a total pressure range from 1–3 atm and low-temperature range between 500 and 800 K. Low-temperature reaction products including cyclic olefins, cyclic ethers, and highly oxygenated intermediates (e. g., ketohydroperoxide KHP, keto-dihydroperoxide KDHP, olefinic hydroperoxides OHP and ketone structure products) were observed. Further investigation of the oxidation of CPT – electronic structure calculations – were carried out at the UCCSD(T)-F12a/aug-cc-pVDZ//B3LYP/6-31+ G(d,p) level to explore the reactivity of O₂ molecules adding sequentially to cyclopentyl radicals. Experimental and theoretical observations showed that the dominant product channel in the reaction of CPT radicals with O₂ is HO₂ elimination yielding cyclopentene. The pathways of second and third O₂ addition – the dissociation of hydroperoxide – were further confirmed. The results of this study will develop the low-temperature oxidation mechanism of CPT, which can be used for future research on accurately simulating the combustion process of CPT.     

白色荧光粉CaF2∶Yb3+/Eu3+/La3+的制备及其上转换发光特性

采用改进的两步高温固相熔融法制备了Yb^3+、Eu^3+、La^3+共掺杂CaF 2的上转换荧光粉。基于荧光猝灭原理,通过改变La^3+掺杂浓度来调节CaF 2∶Yb^3+/Eu^3+材料的发光性能,并在980 nm近红外光激发下,获得了该材料的白色上转换发光(UCL)。在该发光体系中,Yb^3+不仅起到了敏化Eu^3+的作用,同时,Yb^3+二聚体(Yb^3+-dimer)自身合作发出波长范围480~540 nm的绿色荧光。而白光三基色中的绿光正是来自Yb^3+二聚体的合作发光。Eu^3+则作为激活剂,同时发出红色和蓝色荧光。荧光寿命测试结果表明Yb^3+-dimer与Eu^3+之间存在有效的能量传递。值得注意的是,在980 nm激光激发下,1%La^3+掺杂的样品表现出最佳的红、绿、蓝三基色光比列,实现了材料的上转换白光发射,其色度坐标为(0.311,0.340)。     

Failure analysis with a focus on thermal aspect towards developing safer Na-ion batteries

Safety requirements stimulate Na-based batteries to evolve from high-temperature Na–S batteries to room-temperature Na-ion batteries(NIBs).Even so,NIBs may still cause thermal runaway due to the external unexpected accidents and internal high activity of electrodes or electrolytes,which has not been comprehensively summarized yet.In this review,we summarize the significant advances about the failure mechanisms and related strategies to build safer NIBs from the selection of electrodes,electrolytes and the construction of electrode/electrolyte interfaces.Considering the safety risk,the thermal behaviors are emphasized which will deepen the understanding of thermal stability of different NIBs and accelerate the exploitation of safe NIBs.     

Synthesis of deuterium-labeled rosuvastatin calcium

Journal of Radioanalytical and Nuclear Chemistry - The stable isotope-labeled rosuvastatin was requested in order to fully understand the metabolic process of rosuvastatin. An effective synthesis...