Hydrophobic Monomers Recognize Microenvironments in Hydrogel Microspheres during Free-Radical-Seeded Emulsion Polymerization

The three-dimensional structure of nanocomposite microgels was precisely determined by cryo-electron micrography. Several nanocomposite microgels that differ with respect to their nanocomposite structure, which were obtained from seeded emulsion polymerization in the presence of microgels, were used as model nanocomposite materials for cryo-electron micrography. The obtained three-dimensional segmentation images of these nanocomposite microgels provide important insights into the interactions between the hydrophobic monomers and the microgels, that is, hydrophobic styrene monomers recognize molecular-scale differences in polarity within the microgels during the emulsion polymerization. This result led to the formation of unprecedented multi-layered nanocomposite microgels, which promise substantial potential in colloidal applications.     

Influences of Acid on Molecular Forms of Fluorescein and Photoinduced Electron Transfer in Fluorescein‐Dispersing Sol–Gel Titania Films

Fluorescein‐dispersing titania gel films were prepared by the acid‐catalyzed sol–gel reaction using a titanium alkoxide solution containing fluorescein. The molecular forms of fluorescein in the films, depending on its acid–base equilibria, and the complex formation and photoinduced electron transfer process between the dye and titania surface were investigated by fluorescence and photoelectric measurements. The titanium species were coordinated to the carboxylate and phenolate‐like groups of the fluorescein species. The quantum efficiencies of the fluorescence quenching and photoelectric conversion were higher upon excitation of the dianion species interacting with the titania, i.e. the dye–titania complex. This result indicated that the dianion form was the most favorable for formation of the dye–titania complex exhibiting the highest electron transfer efficiency. Using nitric acid as the catalyst, the titania surface bonded to the fluorescein instead of the adsorbed nitrate ion during the steam treatment. The dye–titania complex formation played an important role in the electron injection from the dye to the titania conduction band.     

Enhanced Four-Electron Oxygen Reduction Selectivity of Clamp-Shaped Cobalt(II) Porphyrin(2.1.2.1) Complexes

The molecular structure, electrochemistry, spectroelectrochemistry and electrocatalytic oxygen reduction reaction (ORR) features of two Co^II porphyrin(2.1.2.1) complexes bearing Ph or F₅Ph groups at the two meso-positions of the macrocycle are examined. Single crystal X-ray analysis reveal a highly bent, nonplanar macrocyclic conformation of the complex resulting in clamp-shaped molecular structures. Cyclic voltammetry paired with UV/Vis spectroelectrochemistry in PhCN/0.1 M TBAP suggest that the first electron addition corresponds to a macrocyclic-centered reduction while spectral changes observed during the first oxidation are consistent with a metal-centered Co^II/Co^III process. The activity of the clamp-shaped complexes towards heterogeneous ORR in 0.1 M KOH show selectivity towards the 4e⁻ ORR pathway giving H₂O. DFT first-principle calculations on the porphyrin catalyst indicates a lower overpotential for 4e⁻ ORR as compared to the 2e⁻ pathway, consistent with experimental data.     

Reactive Dyeing of Electrospun Cellulose Nanofibers by Pad-steam Method

Based on the functional properties of electrospun cellulose nanofibers(CNF), scientists are showing substantial interest to enhance the aesthetic properties. However, the lower color yield has remained a big challenge due to the higher surface area of nanofibers. In this study, we attempted to improve the color yield properties of CNF by the pad-steam dyeing method. Neat CNF was obtained by deacetylation of electrospun cellulose acetate(CA) nanofibers. Three different kinds of reactive dyes were used and pad-steam dyeing parameters were optimized. SEM images revealed smooth morphology with an increase in the average diameter of nanofibers. FTIR results showed no change in the chemical structure after dyeing of CNF. Color fastness results demonstrated excellent ratings for reactive dyes, which indicate good dye fixation properties and no color loss during the washing process. The results confirm that the pad-steam dyeing method can be potentially considered to improve the aesthetic properties of CNF, which can be utilized for functional garments, such as breathable raincoats and disposable face masks.     

Shape memory effect and recovery stress property of carbon nanotube/waterborne epoxy nanocomposites investigated via TMA

Shape memory polymers (SMPs) have received great attention and scientific interest in widespread technological development during last few decades. Besides the development of novel SMPs, various techniques have been practiced for characterization of shape memory effect (SME) of SMPs. In this study, the shape memory effect and recovery stress property of the carbon nanotube (CNT)/waterborne epoxy (WEP) nanocomposites below and above the glass transition temperature (T_g) of the nanocomposites and under isostrain and isostress were systematically investigated via thermal mechanical analysis (TMA), respectively. The experimental results showed that the nanocomposites exhibit excellent shape memory effect. The shape memory fixity and recovery ratios were approximately 100% even below glass transition temperature (T_g). A remarkable point is that the strain of the nanocomposites suddenly increased with the temperature decreasing in a certain period of the heating-cooling cycles under isostress condition and the strain increment increased with temperature in general. Especially at low temperature, the recovery stress was very sensitive to temperature under isostrain condition of ±0.25 °C temperature with differential of 25.5 °C developed pressure difference of 0.20 MPa. Moreover, TMA is a practical method for quantifying the SME and recovery stress properties of SMPs and their composites.     

Effect of the Ethanol/BTC Ratio on the Methane Uptake of Mechanochemically Synthesized MOF-199

We report on a detailed textural analysis of mechanochemically synthesized MOF-199 including N₂ adsorption-desorption and CO₂ adsorption isotherms data at 77 K and 273 K (up to atmospheric pressure), respectively, and CH₄ adsorption data at 298 K (up to 35 bar). We used the isotherm adsorption data to determine the micropore volume of the MOF-199 structures, to establish their methane uptake capacity and to understand how these properties depended on the Ethanol/BTC ratio used during the synthesis. The maximum methane uptake capacity for our specimens was recorded at 130 v/v at 35 bars. These results open an avenue for a better understanding of alternative manufacturing processes of MOF structures for gas storage applications.     

Engineering Plant Alternative Oxidase Function in Mammalian Cells: Substitution of the Motif-like Sequence ENV for QDT Diminishes Catalytic Activity of Arum concinnatum AOX1a Expressed in HeLa Cells

Alternative oxidase (AOX) is a nonproton motive quinol–oxygen oxidoreductase which is a component of the mitochondrial respiratory chain in higher plants. In this study, we have characterized the catalytic activity and regulatory behaviors of Arum concinnatum AOX isoforms, namely AcoAOX1a and AcoAOX1b, and their artificial mutants in HeLa cells. We demonstrated that substitution of the motif-like sequence ENV on the C-terminal half of AcoAOX1a for QDT diminishes its activity and proposed that the innate inactivity of AcoAOX1b in HeLa cells is, at least in part, attributable to its QDT motif. Furthermore, we show that introduction of F130L in the hydrophilic N-terminal extension of AcoAOX1a resulted in greater activity in the presence of pyruvate. This result indicates that functional significance of the N-terminal extension is not particular to the conventional regulatory cysteine. On the basis of these findings, we discuss new insights into the structural integrity of AOX in HeLa cells and the applicability of mammalian cells for functional analysis of this enzyme.     

Area‐selective microwrinkle formation on poly(dimethylsiloxane) by treatment with strong acid

Microwrinkles were formed by treating poly(dimethylsiloxane) (PDMS) surfaces with a mixture of concentrated sulfuric acid and nitric acid at 80 °C followed by a water rinsing step. The acid treatment oxidized the treated area, which also swelled owing to absorption of water during the rinsing step. This absorption of water induced a compressive stress on the PDMS surface that caused the formation of wrinkles. The appearance of wrinkles was controlled by the time interval between the end of the acid treatment and the beginning of the water rinsing step. Wrinkles were formed when the time interval was shorter than 5 s, as water was absorbed by the hygroscopic acid molecules within the treated surface. For longer time intervals of 300 s, this phenomenon was not observed. Based on these findings, a procedure for forming wrinkles in specific areas was developed by hydrating the chosen areas with wet filter paper cut into specific shapes after the acid treatment. The formation of wrinkles was confined to the area under the piece of paper. The orientation and alignment of the wrinkles at the boundaries were also characterized. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 167–174