Cu(0) Wire-mediated Single-electron Transfer-living Radical Polymerization of Oligo(ethylene oxide) Methyl Ether Acrylate by Selecting the Optimal Reaction Conditions

The efficient Cu(0) wire-catalyzed single-electron transfer-living radical polymerization (SET-LRP) in organic solvents and mixtures of the organic solvents with water has been thoroughly investigated.Oligo(ethylene oxide) methyl ether acrylate was used as an exemplar oligomer monomer to determine the optimum polymerization conditions for rapid,controlled,and quantitative production of well-defined polymers.The effects of Cu(0)-wire length (12.5 or 4.5 cm),ligand type (tris(dimethylaminoethyl)amine,Me6-TREN,or tris(2-aminoethyl)amine,TREN),and solvent type (dipolar aprotic solvents,cyclic ethers,alcohol,or acetone) on the polymerization have been evaluated.Kinetic experiments were performed for all polymerizations to assess the "living" behavior of each system employed.Importantly,TREN could be used as a replacement for Me_6-TREN in Cu(0) wire-catalyzed SET-LRP of oligomer monomer,which probably provides the most economical and efficient methodology since TREN is 80 times less expensive than Me6-TREN.The high chain-end fidelity of resulting polymer was experimentally verified by thiol-Michael addition reaction at the a-Br chain end and subsequent chain extension with methyl acrylate.     

Electrochemical C–H/N–H cross-coupling of 2-phenylindolizines with phenothiazines to synthesize novel N-aryl phenothiazine derivatives

A facile and elegant method for synthesis of novel N–aryl phenothiazine derivatives from 2-phenylindolizines and phenothiazines through direct electrochemical oxidation has been developed. This approach was performed smoothly at room temperature without external oxidant and catalyst. Cyclic voltammetry and in situ FTIR techniques were applied to analyze the cross-coupling process of phenothiazines and 2-phenylindolizines, which helped to select the appropriate reaction potential. Under the optimized conditions, a broad range of substrates were well tolerated, affording the desired products in moderate to excellent isolated yields (up to 91%) with high regioselectivity. Meanwhile, a plausible mechanism involving a radical pathway has been proposed.     

中空碳纳米球的制备及VOCs吸附性能

首先, 在碱性条件下, 不使用表面活性剂, 采用St?ber小球法以正硅酸四乙酯(TEOS)和正硅酸四丙酯(TPOS)为硅源, 生成初级氧化硅球形颗粒; 然后, 使酚醛树脂(间苯二酚和甲醛)与球形氧化硅的羟基共缩合形成酚醛树脂-氧化硅复合材料; 最后, 经高温碳化和酸蚀获得了空心碳纳米球(HCNSs). 通过调节TEOS/TPOS的摩尔比获得了一系列具有良好的单分散性且粒径、 壁厚可调节的HCNSs, 其粒径和壁厚分别在280~430 nm和15~63 nm的范围内. 仅以TPOS为硅源时合成的HCNS-0/4具有较大的粒径(426 nm)和壁厚(63 nm)、 较高的比表面积(1216 m²/g)和孔容(0.508 cm³/g), 并且具有较大的挥发性有机化合物(VOCs)吸附性能, 其正己烷、 甲苯和油气的静态吸附容量分别为2.02, 1.42和0.926 g/g, 正己烷和甲苯的动态吸附容量分别为2.01 g/g和1.37 g/g, 均远高于商业化活性炭.     

高可见光催化降解污染物和产氢活性的Z型N-掺杂K4Nb6O17/g-C3N4异质结

随着人口增长和全球工业化进程加快,人们饱受环境污染和能源短缺问题的困扰.半导体光催化技术作为一种高效、可持续、环境友好、有潜力的新技术,在环境净化和能源开发方面有着广阔的应用前景.到目前为止,人们已开发出多种半导体光催化剂,并广泛应用于污染物降解、氢气制备和二氧化碳还原等领域.其中,化合物K4Nb6O17具有典型的层状结构、合适的电子能带结构、结构易改性以及良好的电荷传输性能等特点,在光催化领域得到了广泛研究.然而,单纯K4Nb6O17仍存在光响应范围窄、光生载流子复合率高等问题,限制了K4Nb6O17的进一步应用.因此,需要对K4Nb6O17进行改性,拓宽其光吸收范围,提高其光生载流子分离效率,从而提高其光催化活性.本研究通过简单焙烧法制备Z型N-掺杂K4Nb6O17/g-C3N4(KCN)异质结光催化剂,其中石墨相氮化碳(g-C3N4)在复合材料中质量比约为50%.层状K4Nb6O17层板的电子结构通过N掺杂进行调控,拓宽其光响应范围,使其具有可见光响应;同时,形成的g-C3N4位于N-掺杂K4Nb6O17的外层以及内层空间,在这两种组分之间形成异质结,有利于提高光生载流子的分离效率.荧光光谱、时间分辨荧光光谱和光电化学测试表明,N掺杂和异质结的形成有利于增强光生电子-空穴对的传输和分离效率.通过在可见光照射下降解罗丹明B(RhB)和产氢来评估材料的光催化性能.相比g-C3N4(8.24μmol/h)和Me-K4Nb6O17(~1.30μmol/h),KCN复合材料光催化产氢效率(~16.91μmol/h)得到了极大提高,并显示出极好的光催化产氢稳定性能.对于光催化降解RhB体系,KCN复合材料也显示出较好的光催化活性和稳定性,并能很好地将RhB矿化.鉴于KCN复合材料具有较小的比表面积(9.9 m^2/g)且无孔结构,认为比表面积对光催化活性影响较小.因此,与单组分相比,KCN复合材料光催化产氢和RhB降解活性都得到了极大提高,活性的增强主要归功于N掺杂和异质结形成的协同效应,其中N掺杂可以拓宽光捕获能力,异质结形成可提高电荷载流子的分离效率.电子自旋共振(ESR)谱表明,在KCN降解RhB体系中,超氧自由基(·O2^?)、羟基自由基(·OH)和空穴(h^+)作为主要活性物质都参与了反应.结合实验结果可以推测KCN复合材料满足了Z型光催化体系,该体系具有高效的光生载流子分离效率和较高的氧化还原能力.     

A series of coordination polymers constructed from mixed ligands for highly selective luminescence sensing of Fe3+ ions

Transition Metal Chemistry - Four coordination polymers, namely {[Cd2(1,4-NDC)2(dbp)2]·DMF}n (1), {[Cd(1,4-NDC)(dbp)(H2O)]}n (2), {[Zn(2,6-NDC)(dbp)(H2O)]}n (3), and...     

考虑自平衡条件T形曲梁的静力学特性分析

为了准确分析T 形曲梁的静力学特性,该文考虑了剪滞翘曲应力自平衡条件、剪力滞后和剪切变形等因素的影响. 同时为了更好地反映T 形曲梁翼板的位移变化,4 个广义位移函数被引入,分析中以能量变分原理为基础建立了T 形曲梁静力学特性的控制微分方程和自然边界条件. 算例中,分析了剪滞翘曲应力自平衡条件、不同载荷形式和曲梁半径R 等因素对T 形曲梁静力学特性的影响,该文解析解与有限元数值解吻合更好,说明了该文方法的有效性.     

Well Dispersed SnO2 Nanoclusters Preparation and Modulation of Metal-Insulator Transition Induced by Ionic Liquid

Tin dioxide (SnO₂) has attracted broad interest due to its particular gas-sensor property. Nano- or atom-scale SnO₂ material has always been the aim in order to ultimately improve the sensitivity. However, until now, it remains difficult to synthesize SnO₂ nanoclusters by using traditional methods. In the present work, we have achieved the preparation of SnO₂ nanoclusters by using the cluster beam deposition technique. The obtained nanoclusters were well characterized by high resolution transmission electron microscope HR-TEM. Results indicated the formation of the well-dispersed SnO₂ nanoclusters with uniform size distribution (5-7 nm). Furthermore, an obvious metal insulator transition was observed by gating with ionic liquid. Combined with theory calculation, the corresponding mechanism was systematically analyzed from oxygen vacancy induced electron doping.     

双肋式T形梁力学性能的理论分析

以能量变分原理为基础,考虑了剪滞翘曲应力自平衡条件、剪力滞后和剪切变形等因素,建立了双肋式T形梁广义位移的控制微分方程和自然边界条件,获得了相应广义位移的闭合解.进而以算例为基础讨论了自平衡条件、剪力滞后和剪切变形等因素对双肋式T形梁正应力和挠度的贡献.解析解与有限元数值解吻合更好,说明了本文方法的有效性.     

Transport properties of mesoscopic graphene rings

Based on a recursive Green's function method, we investigate the conductance of mesoscopic graphene rings in the presence of disorder, in the limit of phase coherent transport. Two models of disorder are considered: edge disorder and surface disorder. Our simulations show that the conductance decreases exponentially with the edge disorder and the surface disorder. In the presence of flux, a clear Aharonov-Bohm conductance oscillation with the period Φ₀ (Φ₀=h/e) is observed. The edge disorder and the surface disorder have no effect on the period of AB oscillation. The amplitudes of AB oscillations vary with gate voltage and flux, which is consistent with the previous results. Additionally, ballistic rectification and negative differential resistance are observed in I-V curves, with on/off characteristic.     

Z形石墨带的电子输运性质: 形状与尺寸效应

基于格林函数方法及Landauer-Büttiker公式, 研究了纳米石墨带异质结的电子输运性质, 石墨带异质结由Z 形石墨带与两个锯齿型石墨带电极构成. 研究发现电导大小依赖其几何构型. 由于电子局域在锯齿型石墨带边缘, 因此在费米能级附近出现了电导隙或电导谷. 调节结间石墨带的宽度, 发现准束缚态的存在诱导许多尖锐的电导峰, 电导峰的数目几乎与结间的石墨带长度无关. 在低能区, 当θ为60°或150°时, 宽度均匀的Z型石墨带仍然保持弹道输运特征. 因此, Z形纳米石墨带可选择地应用于未来的纳微电路.