New ANCF solid-beam element: relationship with Bézier volume and application on leaf spring modeling

Acta Mechanica Sinica - An eight-node solid-beam element based on absolute nodal coordinate formulation (ANCF) which uses cubic interpolation at the longitudinal direction and linear at the...     

Instability analysis for semi-active control systems with semi-active inerters

Nonlinear Dynamics - In this paper, the instability of semi-active control systems caused by the utilization of semi-active inerters is analyzed. The purpose of this study is to demonstrate the...     

Non-perturbative positive Lyapunov exponent of Schrödinger equations and its applications to skew-shift mapping

We first study the discrete Schrödinger equations with analytic potentials given by a class of transformations. It is shown that if the coupling number is large, then the Lyapunov exponent equals approximately to the logarithm of this coupling number. When the transformation becomes the skew-shift mapping, we prove that the Lyapunov exponent is weak Hölder continuous, and the spectrum satisfies Anderson Localization and contains large intervals. Moreover, all of these conclusions are non-perturbative.     

Boundedness of semilinear Duffing equations at resonance in a critical situation

In this paper, we propose a sufficient and necessary condition for the boundedness of all the solutions for the equation $\ddot{x}+n^{2}x+g(x)=p(t)$ with the critical situation that $|{\int }_0^{2\pi }p(t)e^{?int}dt|=2|g(+\infty )?g(?\infty )|$ on g and p, where $n\in {\mathbb{N}}^{+}$, $p(t)$ is periodic and $g(x)$ is bounded.     

水力劈裂问题的态型近场动力学建模

将态型近场动力学理论引入水力劈裂问题的模拟。构建了能反映岩土类材料准脆性断裂特征的态型近场动力学本构模型,并在物质点间相互作用力模型中加入等效水压力项,以实现在新生裂纹面上跟踪施加水压力。同时,考虑裂纹面间的接触,引入物质点间的短程排斥力作用,并设计了相应的接触算法。通过自编程序将模型和算法应用于含初始裂纹、不含初始裂纹以及含坝基软弱结构面的混凝土重力坝在高水头作用下的水力劈裂过程模拟,并与扩展有限元等模拟结果对比,验证了本文模型和算法的可行性和准确性。     

一类具有边界层性质的二次奇摄动边值问题

研究了一类具有边界层性质的二次奇摄动边值问题.在相对较弱的条件下,用合成展开法构造出该问题的形式近似式,并应用改进的Harten不动点定理和逆算子定理证明解的存在性及其渐近性质.最后,将所研究的问题和结论推广到更一般的高次情形.     

Multi-scale Fractured Coal Gas–Solid Coupling Model and Its Applications in Engineering Projects

With coal mining entering the geological environment of “high stress, rich gas, strong adsorption and low permeability,” the difficulty of joint coal and gas extraction clearly augments, the risk of solid–gas coupling dynamic disasters greatly increases, and the underlying mechanisms become more complex. In this paper, based on the characteristics of coal’s multi-scale structure and spatiotemporal variation, the multi-scale fractured coal gas–solid coupling model (MSFM) was built. In this model, the interaction between coal matrix and its fractures and the mechanical characteristics of gas-bearing coal were considered, as well as their coupling relationship. By MATLAB software, the stress–damage–seepage numerical computation programs were developed, which were applied into Comsol Multiphysics to simulate gas flow caused by coal mining. The simulation results showed the spatial variability of coal elastic modulus and cross-flow behaviors of coal seam gas, which were superior to the results of traditional gas–solid coupling model. And the numerical results obtained from MSFM were closer to the measured results in field, while the computation results of traditional model were slightly higher than the measured results. Furthermore, the MSFM in a large scale was verified by field engineering project.     

基于LBM方法的风力发电机尾流结构仿真

针对传统CFD数值计算方法难以实现风力机动态旋转及其旋转状态下的流固耦合计算,本文结合格子玻尔兹曼(LBM)方法易于处理动态复杂边界的特点及大涡模拟(LES)方法在非稳态涡流结构捕捉上的优势,采用LBM-LES联合方法进行三维风力发电机整机气动性能及尾流结构仿真研究,同时采用尺度自适应方法对尾涡结构进行跟踪和精细化计算。针对NREL PhaseⅥ型试验机进行模拟,得到了与实验结果吻合的流动形态及尾流结构演变规律,分析了尾流区速度演变规律并对比了不同亚格子湍流模型对计算结果的影响.